تفليش نوكيا c7- rm 691 بي فلاشة c7-rm-675 بي نجاح بيلا 111.030.0609

[abdo zizo]

السلام عليكم تفليش نوكيا c7 rm-691 بي فلاشة نوكيا c7 rm-675 بي نجاح ع بيتس
card found: S/N xxxxxxxx
registered to: abdozizo


Connect phone on selected interface...


Connect phone on selected interface...


Core : v1.47 , FlashEngine : v1.5


Selected FlashSettings : Manual
Check FlashFiles, Please, wait...


Files Set for Flashing :
MCU : RM-675_111.030.0609_79u_prd.core.fpsx
PPM : RM-675_111.030.0609_13.01_MEA_A_79u_prd.rofs2.fpsx
PPM2 : RM-675_111.030.0609_C08.01_MEA_5_79u_prd.rofs3.fpsx
CNT : RM-675_111.030.0609_U06.01_79u.uda.fpsx
APE : rm675_ENO_v_0.0514_APEONLY.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 12C0001736A7034447A01999FC0653C5CB2E71FF
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 006800EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 95A68E9FA27B2BFA89EA204FC846EB73DEF1D93F
ADL: phone is in flash mode


Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 353755047948825
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!


NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...


RPL saved : c:\InfinityBox\BEST\Backup\Cert\353755047948825_CRT_2nd.rpl


===Flashing [MCU]===
Erase : Processing RM-675_111.030.0609_79u_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing RM-675_111.030.0609_79u_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [SOS+DECOMP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS+IVE3A]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 507 blocks
TIME : Write time : 00:00:34
MCU Write done
ADL: Request programm status
NAND status : 00000006 / 00000003 / 00000000


===Flashing [PPM]===
Erase : Processing RM-675_111.030.0609_13.01_MEA_A_79u_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-675_111.030.0609_13.01_MEA_A_79u_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 186 blocks
TIME : Write time : 00:00:18
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000003 / 00000000


===Flashing [PPM2]===
Erase : Processing RM-675_111.030.0609_C08.01_MEA_5_79u_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM-675_111.030.0609_C08.01_MEA_5_79u_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
CMT: Writing Hash CERT [SOS+IVE3B]
Total writen 4 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000006 / 00000003 / 00000000


===Flashing [CNT]===
Erase : Processing RM-675_111.030.0609_U06.01_79u.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing RM-675_111.030.0609_U06.01_79u.uda.fpsx
Total writen 620 blocks
TIME : Write time : 00:00:27
CNT Write done
ADL: Request programm status
NAND status : 00000006 / 00000003 / 00000000


===Flashing [APE]===
Erase : Processing rm675_ENO_v_0.0514_APEONLY.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm675_ENO_v_0.0514_APEONLY.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 20 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000006 / 00000003 / 00000000


ADL: Close_Session
Content: 000300000000060000000300000000
ADL: Reboot


Flashing done!
Total flash time : 00:01:27
Reboot phone now...


Reading Phone Info....
Connected phone - Nokia C7-00
Software Info: V 79_sr1_11w42.5 25-11-11 RM-675 (c) Nokia
IMEI: 353755047948825
Ape Version: 111.030.0609
Product code: 059B8M2
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
AfterFlash operations done ;D
Done!


Elapsed: 00:01:55
Connect phone on selected interface...


Phone found!
Series 60 Device detected!
read info... - Ok


Resetting selected items...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!


Elapsed: 00:00:10
ملاحضه تم تمرير السوفت وير مرتين بي المره الاولى يعطي نوكيا فقط ومن ثم في الثانية يعمل تمام

[Ahmed Zitoon]

كلام جميل قوى جارى التجريه

[عبد الماجد]

جزاك الله خيرا

[عمارالغالي]

شكرا لك اخي...................جاري التجربة

[tAboAli]

thank you and very cood

[tAboAli]

thank you and very very good

[ألمتفائل]

وانا كذلكم نجح معي التعريب
MXKEY [MxKey Team HTI PLUS Flasher Interface 0], SN: xxxxxxxx
Using device: USB Phonet and HTI, FW ver: 00.50, SN: 01007907
Connection status: EHCI:HUB:HUB::USB 2.00 (High-speed)
Driver: nmwcdc, ver: 7.1.32.75
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14195(13-07-2012)
Processing MCU file: RM-675_111.030.0609_79u_prd.core.fpsx
[BB5,XSR 1.6] size: 120.12 MB
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
CMT SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPUYAMA ver: 1.1]
CMT EM0 ID: 00001040
CMT EM1 ID: 00001030
CMT PUBLIC ID: 1510010C167454408B3A56A413F6A02054A46FA5
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
CMT ROM ID: E693EF0DAC22615B
Loading CMT secondary boot code
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 11.14.0 revision: 3.0 size: 0x3B40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0000 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0060 - 0000 0032 [Samsung LH28F800BG] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.6
Loading CMT update server data
Algorithm: RAPUv11_XSR17_alg.fg [XSR 1.6] version: 11.14.0 revision: 3.0 size: 0xC66D5
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
Update server code loaded.
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 2DF80E76
FUR: Adding Asic CMT as client OK.
Reading CMT NPC (0x190 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x1D8 bytes).
Reading CMT HWC (0xD4 bytes).
Reading CMT R&D (0x0 bytes).
Reading CMT MDM_KEYS (0x0 bytes).
Reading CMT PARTNERC (0x0 bytes).
NPC_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\BB5_35697804037851_CERT.rpl"
CMT PAPUBKEYS HASH: 95A68E9FA27B2BFA89EA204FC846EB73DEF1D93F
Storing certificate [NPC, CCC, HWC, R&D, PARTNERC] ...OK
Partitioning....
Partitioning complete
Erase size: 489.06 MB
CMT FLASH,MuxOneNAND area [00040000-0007FFFF]
CMT FLASH,MuxOneNAND area [000C0000-008BFFFF]
CMT FLASH,MuxOneNAND area [00DC0000-0E97FFFF]
CMT FLASH,MuxOneNAND area [2E100000-3E5FFFFF]
Formating partition ...
Flash programming ...
CMT ADA block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT SOS+PMML block sent
CMT SOS+DECOMP block sent
CMT PASUBTOC block sent
CMT PAPUBKEYS: 95A68E9F [RAP Certificate v1 263] sent
CMT GENIO_INIT block sent
CMT SOS+IVE3A block sent
CMT SOS*UPDAPP block sent
CMT SOS*DSP0 block sent
CMT LDSP block sent
CMT SOS*ISASW block sent
CMT SOS+CORE block sent
CMT SOS+ROFS1 block sent
Programming completed in 27.394 s
Processing PPM file: RM-675_111.030.0609_13.01_MEA_A_79u_prd.rofs2.fpsx
[BB5,XSR 1.6] size: 46.23 MB
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
Erase size: 59.25 MB
CMT FLASH,MuxOneNAND area [09F40000-0DA7FFFF]
Flash programming ...
CMT SOS+ROFS2 block sent
Programming completed in 10.938 s
Processing PPM file: RM-675_111.030.0609_C04.01_MEA_1_79u_prd.rofs3.fpsx
[BB5,XSR 1.6] size: 31.48 KB
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
Erase size: 15.16 MB
CMT FLASH,MuxOneNAND area [01378000-0139FFFF]
CMT FLASH,MuxOneNAND area [0DA80000-0E97FFFF]
Flash programming ...
CMT SOS+ROFS3 block sent
CMT SOS+IVE3B block sent
Programming completed in 0.099 s
Processing CNT file: rm675_ENO_v_0.0514_APEONLY.fpsx
[BB5,XSR 1.6] size: 4.73 MB
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
Erase size: 5 MB
CMT FLASH,MuxOneNAND area [008C0000-00DBFFFF]
Flash programming ...
CMT SOS*ENO block sent
Programming completed in 1.207 s
Processing CNT file: RM-675_111.030.0609_U06.01_79u.uda.fpsx
[BB5,XSR 1.6] size: 154.98 MB
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
Erase size: 503.50 MB
CMT FLASH,MuxOneNAND area [0E980000-2E0FFFFF]
Flash programming ...
Programming completed in 43.081 s
Total time for flashing process(boot+erase+write) was 1 min 46.023 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C7-00 USB Phonet, PORT_ID: 5883137
Verifying communication to device OK.



Phone type: RM-675 (Nokia C7-00)
SW version: V 79_sr1_11w42.5 25-11-11 RM-675 (c) Nokia
ApeCoreSw: 111.030.0609
Imei plain: 35697804037851-2
Product code: 059F8H2
Battery voltage: 3910 mV, current: 162 mA
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: 356978040378512
Version: SIMLOCK SERVER
Provider: T-Mobile USA , Country: United States
Counter: 0/3, 0/10

CONFIG_DATA: 3102000000000000
PROFILE_BITS: 8000000000000000

BLOCK1: 1=OPEN
BLOCK2: 1=OPEN
BLOCK3: 1=OPEN
BLOCK4: 1=OPEN
BLOCK5: 1=OPEN
BLOCK6: 1=OPEN
BLOCK7: 1=OPEN
BLOCK8: 1=OPEN
BLOCK9: 1=OPEN
BLOCK10: 1=OPEN
BLOCK11: 1=OPEN
BLOCK12: 1=OPEN
BLOCK13: 1=OPEN
BLOCK14: 1=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 2.033 s

[محمود محمد الم]

اخى الكريم
فعلا كلامك مظبوط لقد قمت بالتجربة وقد نجحت 100%
مشكورررررررررررررررا

[gem-gsm]

الف شكر وبرافو على قوة قلبك

[مهند هارد]

شكرا على المجهود الرائع