قائمة الاعضاء المشار اليهم
النتائج 1 إلى 2 من 2

الموضوع: نوكيا n73لا يقبل فلاشة

  1. #1
    .: جيماوي رائع :.
    الصورة الرمزية AZDE842

    الحالة
    غير متواجد
    تاريخ التسجيل
    Apr 2010
    الدولة
    spain
    العمر
    33
    Phone
    blackberry 9800
    المشاركات
    955
    الشكر
    547
    شُكر 546 فى 316 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    27

    افتراضي نوكيا n73لا يقبل فلاشة

    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
    FlashContent[0,CMT]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    Warning: PAPUBKEYS Hash Missing!
    Searching for BootCode: DualLine 32Bit
    helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    Failed to send APE Secondary Loader -> Failed to get APE Configuration Data
    Prepare phone failed with message -> APE Secondary Boot Failed
    Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
    RPL backup thread finished, continuing...
    Pre flash tasks finished, continuing...
    Processing N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx (CMT)...
    Booting CMT...
    APE_SYSTEM_ASIC_ID: 17100708
    APE_ASIC_MODE_ID: 00
    APE_PUBLIC_ID: 0AA57393E21F31697CDB56A5445D7571BA62DD54
    APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
    APE_BOOT_ROM_CRC: 1DFD6613
    APE_SECURE_ROM_CRC: 2C872FD4
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID: 00000295
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 1A600009E2A44F504EA5A1A2FB44B35B7BE3C7C4
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC: 273F6D55
    CMT_SECURE_ROM_CRC: DFAAF68F
    CMT Ready!
    N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx, Type: Flash Image, Algo: BB5, BB5 ALGORITHM, BB5, OMAP1710 UNISTORE-II-1.2.1 ALG
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.42.0, Algo: BB5
    Flashbus Write baud set to 51Kbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
    FlashContent[0,CMT]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.40.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    Warning: PAPUBKEYS Hash Missing!
    Flashbus Write baud set to 5.0Mbits
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x00080000-0x00731951, NOR
    EraseArea[0,CMT]: 0x00000000-0x0005FFFF, NOR
    EraseArea[0,CMT]: 0x001E0000-0x001FFFFF, NOR
    EraseArea[0,CMT]: 0x00880000-0x00FEFFFF, NOR
    Waiting 320s for erasure finish...
    Erase taken 3.417s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT NOLO Certificate...
    Block Write Failed -> Failed to write CMT cert data (3), Programming Status Error
    Processing Flash Image Failed -> Failed to write all blocks
    Failed to Process all Image files -> Failed to process N73_4.0839.42.2.1_western_C00_PRD_cc.fpsx




  2. # ADS
    Circuit advertisement
    تاريخ التسجيل
    Always
    الدولة
    Advertising world
    العمر
    2010
    المشاركات
    Many
  • # ADS

    تاريخ التسجيل
    Always
    الدولة
    Advertising world
    العمر
    2010
    المشاركات
    Many


  • #2
    صديق المنتدى
    الصورة الرمزية NAPOLI

    الحالة
    غير متواجد
    تاريخ التسجيل
    Nov 2008
    Sonork
    ورفعنا لك ذكرك
    المشاركات
    5,520
    الشكر
    15,756
    شُكر 7,882 فى 3,405 مشاركة
    تم تذكيره فى
    1 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    140

    افتراضي رد: نوكيا n73لا يقبل فلاشة

    تاكد من الكيبل المستخدم
    جرب على بوكس اخر
    نظف الجهاز جيدا بالتنر
    لو لم ينجح المشكلة هارد وير قم بعمل تعديل سينسور بور


  • الكلمات الدلالية لهذا الموضوع

    المفضلات

    المفضلات

    ضوابط المشاركة

    • لا تستطيع إضافة مواضيع جديدة
    • لا تستطيع الرد على المواضيع
    • لا تستطيع إرفاق ملفات
    • لا تستطيع تعديل مشاركاتك
    •