قائمة الاعضاء المشار اليهم
النتائج 1 إلى 7 من 7

الموضوع: CycloneBox Reloaded Launched and new Installer v1.20

  1. #1
    صديق المنتدى
    الصورة الرمزية esso elkordy

    الحالة
    غير متواجد
    تاريخ التسجيل
    Apr 2012
    الدولة
    6 October City, Egypt
    Phone
    Nokia 1616-1207/////Sam SM-B310E
    المشاركات
    1,883
    الشكر
    3,239
    شُكر 4,562 فى 1,332 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    1 مواضيع
    معدل تقييم المستوى
    66

    افتراضي CycloneBox Reloaded Launched and new Installer v1.20


    Cyclone Box Reloaded

    Cyclone Box Reloaded
    Some More Basic Information :
    - USB Bus powered only, 5V @ 500mA (2.5W)
    - USB 1.0, 1.1, 2.0 and 3.0 Compatible
    - Supported Operating Systems: All NT based Windows OS (including x86 and x64 platforms - drivers signed for 64bit) - this includes Windows NT, Windows Xp, Windows Vista, Windows 7, and upcoming
    ones
    - Lightweight construction
    - Smartcard Connector
    - Nokia Flashbus / FBUS RJ48 connector with TX and RX signalling LED. Pinout is UFS/JAF compatible (no need adapters anymore, plug it straight).
    - Based on well-tested AVR32 technology in Cyclone Classic, powered by 66MHz 32bit RISC cpu
    - Built-in VPP generator for old NOR based phones
    - USB signalling led (USB transaction signalling)
    - VBAT singalling led (power-up status of Flashbus port)
    - Works also as USB dongle for USB-only operations, if USB connectivity with Nokia phones is needed
    - Operates 100% standalone (after initial registration)

    --------------------------------

    New CycloneBox Installer v1.20 (03.05.2012)

    Things which introduced in new Version

    - New Faster and reliable Hw introduced (Cyclone Box Reloaded)
    - New Loaders v11.50.00 added
    - FastMM v4.99 Introduced
    - MEP-40488-004 added
    - Xgold113 (Dual-sim) RPL write support added- Project completly refactorized from scratch. Compiler changed from obsolete Delphi7 to Delphi2007. Just because of this, lots of stability and speed improvment gained.
    - "News" added in main window
    - "New Super Easy Downgrade" BB5 method added (Backup,flash,downgrade,restore rpl all just in one click)Tick in before-flash tasks
    - Added Windows 7 interactive progressbar when minimized to tray. When software is minimized, you will notice status of current job: green progressbar - working, red progressbar - error, yellow-paused, etc
    - Boot recovery added for all boxes during box wizard
    - Added COD->NCK verification upon data generation
    - After COD->NCK calculation, NCK codes are automatically stored inside COD file
    - New Paths is now addded to default Flash Path Search table (C:\Users\xxxx\AppData... etc)
    - Box wizard Added; this is all-in-one tool which will: repair, upgrade, activate, register, bootloader recovery, smartcard refill, bootloader upgrade, etc your box. Just one click.


    Improvements

    - No need anymore to tick "Old USB flashing method" manually, it's detected automatically
    - When Windows 7 is detected, software is not hidden to tray
    - Bootloader reverted to v2.13 (temporary solution, v3.01 will get back soon)
    - Automatic smartcard refill when empty addded
    - Software is redesigned now. To gain full funcionality YOU DON'T NEED run as "Admin". This means you can be ensured about our software quality and security - no hidden trojans (as happened before with other products).
    - Splash updated
    - Box Registration module removed (box wizard introduced)
    - Box Maintenance module removed (box wizard introduced)
    - Card Maintenance module removed (box wizard introduced)
    - The paths is now updated on each sw startup
    - Only one copy of Cyclone Box application can be launched now, this improves stability
    - "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
    - Skin Stack Updated to v7.62


    Bug Fixes

    - Windows7 Permission issues fixed (needed "Run as admin" to work properly with autoupdate)
    - Fixed Windows7 Save Paths/Settings problem
    - BB5 loader problems when skin enbled (ROM refused...etc)
    - Access violation on exit fixed
    - CBUS Lost Handle Fixed
    - "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
    - libeay/ssleay libraries updated to latest one, much more fast and stable
    - NCK Code Sending fixed for SIMLOC30 phones (0x01 error)
    - Fixed tray issues
    - Autoupdate code is now checking for installed installer, if obsolete then asks for download latest version
    - Improved RPL backup in USB mode (Custom Loader didn't reset phone to FlashMode, and some backups did contain Superdongle/Simlock data only)
    - XGold/Blackberry Service "Credits" renamed to "Counter" (because it is a counter, not real fee-credits), as it puts too much confusion
    - "security problem #1" solved on those who copied cyclonebox.dll before
    - Fixed interrupted auto-update problems (after restart - this is not valid Win32 application)
    - Minor changes and bugfixes

    Important Notes

    1. If you are using old (Classic) Cyclone Box and having old Card serial number (2009,2010) and after latest
    bootloader upgrade, your box can't enter into bootloader mode, your box boot need Recovery. This will be proceeded AUTOMATICALLY, just use Box Wizard.
    2. Box Maintenance, Box Registration, Card Maintenance are removed from this release
    3. Your box having 3 update credits from now
    4. Box Firmware v02.01 is required, so this update could be operational
    5. Use "Box Wizard". This is one-click tool for box repair (boot recovery), upgrade, activation, registration, smartcard upgrade/initialization, and so on.
    6. If you are using Windows 7, autoupdate in old version may fail (fixed already). In case download installer directly, or run SW with Admin privileges.
    7. ALWAYS fresh installer you could find at: http://www.karwos.hk/CycloneBoxInstaller.exe
    8. Autoupdate after updating EXE should ask you for downloading and installing latest installer. If something will fail during Autoupdate process, just look at 7 and download Installer manually.

    CycloneBox Classic and Reloaded Official Website
    CYCLONE BOX - RELOADED


    Cyclone Team Official Facebook page
    www.facebook.com/cyclonebox


    Best Regards
    CycloneBox Team




  2. # ADS
    Circuit advertisement
    تاريخ التسجيل
    Always
    الدولة
    Advertising world
    المشاركات
    Many
  • # ADS

    تاريخ التسجيل
    Always
    الدولة
    Advertising world
    المشاركات
    Many


  • #2
    .: جيماوي فعال :.
    الصورة الرمزية ABO SHAHD~

    الحالة
    غير متواجد
    تاريخ التسجيل
    Nov 2010
    الدولة
    Egypt
    Phone
    Nokia 701
    المشاركات
    176
    الشكر
    261
    شُكر 293 فى 94 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    19

    افتراضي رد: CycloneBox Reloaded Launched and new Installer v1.20

    بارك الله فيك
    ابديت ممتاز من فريق محترم
    وهذا رابط مباشر
    www.karwos.hk/CycloneBoxInstaller.exe

  • #3
    صديق المنتدى
    الصورة الرمزية NAPOLI

    الحالة
    غير متواجد
    تاريخ التسجيل
    Nov 2008
    Sonork
    ورفعنا لك ذكرك
    المشاركات
    5,520
    الشكر
    15,756
    شُكر 7,882 فى 3,405 مشاركة
    تم تذكيره فى
    1 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    140

    افتراضي رد: CycloneBox Reloaded Launched and new Installer v1.20

    شكرا اخي الكريم يارك الله فيك

  • #4
    .: جيماوي محترف :.
    الصورة الرمزية mr_rabie

    الحالة
    غير متواجد
    تاريخ التسجيل
    Feb 2008
    الدولة
    مصراوى
    Phone
    note 3
    المشاركات
    2,725
    الشكر
    7,870
    شُكر 1,256 فى 835 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    48

    افتراضي رد: CycloneBox Reloaded Launched and new Installer v1.20

    جزاك الله خيرا

  • #5
    .: جيماوي مشارك :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Apr 2010
    المشاركات
    128
    الشكر
    8
    شُكر 37 فى 32 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    15

    افتراضي رد: CycloneBox Reloaded Launched and new Installer v1.20

    شكرا اخي الكريم

  • #6
    صديق المنتدى
    الصورة الرمزية esso elkordy

    الحالة
    غير متواجد
    تاريخ التسجيل
    Apr 2012
    الدولة
    6 October City, Egypt
    Phone
    Nokia 1616-1207/////Sam SM-B310E
    المشاركات
    1,883
    الشكر
    3,239
    شُكر 4,562 فى 1,332 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    1 مواضيع
    معدل تقييم المستوى
    66

    افتراضي رد: CycloneBox Reloaded Launched and new Installer v1.20

    شكرا لمرور الجميع

  • #7
    .: جيماوي جديد :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Sep 2007
    المشاركات
    14
    الشكر
    1
    شُكر 9 فى 6 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    19

    افتراضي رد: CycloneBox Reloaded Launched and new Installer v1.20

    thxxxxxxxxxxxxxxxx

  • الكلمات الدلالية لهذا الموضوع

    المفضلات

    المفضلات

    ضوابط المشاركة

    • لا تستطيع إضافة مواضيع جديدة
    • لا تستطيع الرد على المواضيع
    • لا تستطيع إرفاق ملفات
    • لا تستطيع تعديل مشاركاتك
    •