جميع تحديثات volcano box اخر تحديث v 3.0.9

[mora1100]

VolcanoBox 1.8.5 MTK - Coolsand - Alcatal & More..

---

• MTK6236 added special encryption
• Optimize MTK EMMC flashing
• Added Coolsand Read/Write new flash ic
• Adjust Coolsand Read
• Adjust SPD 6530 Read
• Adjust MTK EMMC Read
• MTK Android platform V1.02 added

• 
  
  • Orange Denvor
  • OT-A986
  • OT-A980
  • OT-3201
  • OT-4301
  • OT-992D
  • OT-997
  • OT-A996
  • OT-W969

Download link

@ All from Lahore. i will be in lahore for 2 days. Please contact me For all Unsupported phones and for these phones to which make problem on Volcano Box. Tomorrow i will be in lahore. If you have phones in your hand which is not supported with volcanobox or which makes problem with Volcano box and you are in Lahore. Please call me 03334684812. i am waiting for you calls !!



http://hotfile.com/dl/188044810/4f8e...1.8.5.rar.html

[اللتر]

What's new ?
Adjust MTK AT mode 625A IMEI Change
Adjust MTK General Parameters IMEI Change
Adjust MTK Android Format
Added SPD new screen lock algorithm




Click here to download

[kader phone]

Boomb Boomb Boomb VolcanoBox 1.8.8 Presents Some World's 1st & Exclusives Exclusively Presents : MTK andriod Read Infor added system files(file address and length) Exclusively Presents : Based on MTK andriod read info it can read seperate address and length Exclusively Presents : SPD 6530a added new flash 25q128FWPM This is world's 1st. i had tested on all other boxes Exclusively Presents : Added coolsand usb CT1128CPU read flash Normal: Adjust coolsand usb Read flash auto identify address and length Details: What is MTK andriod Read Infor added system files(file address and length) and Based on MTK andriod read info ? This is for Experts only !! if you don't know what are you doing then Don't try this @ home or office or @ school whenever you got any Chinese mobiles MTK Android, you may need to know it's emmc areas. you can simply click on read info, select read info, select Usb mode, Click on run, when Volcano says Analize for usb, Insert usb cable into phone ( keep in mind some phones need to press & hold any button to put phone into preloader mode & some need to insert usb cable without battery & when software start downloading boot then insert battery), it will 1st read mobile Flash area after that volcano will read it's Emmc area which is same like in OG Tools, there you can see all their Emms parts, Specially Boot, Recovery etc, you will get complete info include Length & Size. also if you use little mind you will also no need to find scatters files so let me show you some examples how you can do it... for example i have MTK 6575 Click on read info Select built-in-boot 10 Tick on usb mode Untick Auto pinfind Click on run Code: After format or Flash you have to press & hold power button for at least 1.30 mins. Available Ports:COM1 COM4 COM19 COM20 Analysis of USB port,Please insert phone USB cable. when software says this then insert usb cable to mobile it will read like this Code: CPU TYPE:6575 Hardware version:CB00 Software version:E201 Boot downloading complete! EMMC_ID:0x1501004E4A5330304D00000000000000 EMMC_PRODUCT_NAME: SAMSUNG :0x4E4A5330304D EMMC_BOOT1_SIZE: 0x00100000 EMMC_BOOT2_SIZE: 0x00100000 EMMC_PRMB_SIZE: 0x00020000 EMMC_GP1_SIZE: 0x00000000 EMMC_GP2_SIZE: 0x00000000 EMMC_GP3_SIZE: 0x00000000 EMMC_GP4_SIZE: 0x00000000 EMMC_USER_SIZE:E9000000 Analysis of USB port... Analysis of system files... PRELOADER addr:0x000000 --length:0x040000 DSP_BL addr:0x040000 --length:0x5C0000 MBR addr:0x600000 --length:0x004000 EBR1 addr:0x604000 --length:0x004000 __NODL_PMT addr:0x608000 --length:0x400000 __NODL_NVRAM addr:0xA08000 --length:0x500000 __NODL_SECCFG addr:0xF08000 --length:0x020000 UBOOT addr:0xF28000 --length:0x060000 BOOTIMG addr:0xF88000 --length:0x600000 RECOVERY addr:0x1588000 --length:0x600000 SEC_RO addr:0x1B88000 --length:0x600000 __NODL_MISC addr:0x2188000 --length:0x060000 LOGO addr:0x21E8000 --length:0x300000 __NODL_EXPDB addr:0x24E8000 --length:0x200000 ANDROID addr:0x26E8000 --length:0x20100000 CACHE addr:0x227E8000 --length:0xA100000 USRDATA addr:0x2C8E8000 --length:0x41100000 FAT addr:0x6D9E8000 --length:0x000001 __NODL_BMTPOOL addr:0xFFFF0000 --length:0x000000 Format addr:0x2C8E8000 --Format length:0x1270000 >>Read phone information success. so here you can see Code: EMMC_ID:0x1501004E4A5330304D00000000000000 EMMC_PRODUCT_NAME: SAMSUNG :0x4E4A5330304D EMMC_BOOT1_SIZE: 0x00100000 EMMC_BOOT2_SIZE: 0x00100000 EMMC_PRMB_SIZE: 0x00020000 EMMC_GP1_SIZE: 0x00000000 EMMC_GP2_SIZE: 0x00000000 EMMC_GP3_SIZE: 0x00000000 EMMC_GP4_SIZE: 0x00000000 EMMC_USER_SIZE:E9000000 This is General NAND Flashing Area. and Code: PRELOADER addr:0x000000 --length:0x040000 DSP_BL addr:0x040000 --length:0x5C0000 MBR addr:0x600000 --length:0x004000 EBR1 addr:0x604000 --length:0x004000 __NODL_PMT addr:0x608000 --length:0x400000 __NODL_NVRAM addr:0xA08000 --length:0x500000 __NODL_SECCFG addr:0xF08000 --length:0x020000 UBOOT addr:0xF28000 --length:0x060000 BOOTIMG addr:0xF88000 --length:0x600000 RECOVERY addr:0x1588000 --length:0x600000 SEC_RO addr:0x1B88000 --length:0x600000 __NODL_MISC addr:0x2188000 --length:0x060000 LOGO addr:0x21E8000 --length:0x300000 __NODL_EXPDB addr:0x24E8000 --length:0x200000 ANDROID addr:0x26E8000 --length:0x20100000 CACHE addr:0x227E8000 --length:0xA100000 USRDATA addr:0x2C8E8000 --length:0x41100000 FAT addr:0x6D9E8000 --length:0x000001 __NODL_BMTPOOL addr:0xFFFF0000 --length:0x000000 This is it's emmc details area. this is same like Factory Provide scatter file. in this you can find all details. like you can see it's master boot record, Boot image, Recovery area and lot of other things which you will need to know for repairing any phone, AT THE MOMENT WE ONLY SUPPORT FOR READ CUSTOM AREA, WRITING WILL BE ON NEXT UPCOMING UPDATES, how you can read any specific area ? let me give you an example. like from this phone you need to read it's boot image only. this is really help if you got any phone with boot dead. you can simply read boot image from any same working phone and write on faulty phone your faulty phone will be repaired. i am repeating again AT THE MOMENT WE SUPPORT ONLY READ CUSTOM AREA, WE DO NOT SUPPORT WRITING AT THE MOMENT, WRITING CUSTOM AREA WILL BE COME IN NEXT UPCOMING UPDATE, after you read info you can see it's all address, now you want to read it's boot image and it's details are BOOTIMG addr:0xF88000 --length:0x600000 here it is. as you see "addr:0xF88000" this is START ADDRESS. "length:0x600000" this is FLASH SIZE. "addr" should be written in "START ADDRESS" in volcanobox MTK tab "length" should be written in "FLASH SIZE" in volcanobox MTK tab i suggest do copy/paste instead of writing with your keyboard. after you done. click on read flash and click on run. it will read you desire Flash area !! SPECIAL GIFT FOR ALL VOLCANOBOX USERS i just make special MTK ALL IN ONE DRIVER. now you don't need to found many drivers. if you have just this ONE DRIVER it will cover your all MTK Drivers needs. This will cover all these needed drivers, "MediaTek Inc." "MTK USB Port" "MTK USB Modem Port" "MTK USB Debug Port" "MediaTek PreLoader USB VCOM Port" "MediaTek DA USB VCOM Port" "USB Serial emulation modem driver" so just download only this ONE Driver and you will have cover all these drivers. Click here to Download MTK Universal Drivers Click here to download VolcanoBox 1.8.8 Volcanobox Mirror Support Area, Here you can find all old & Full installers Click here for Best online unlock code server, Click here to register and get amazing discount !!

[kader phone]

Whats new ?

World's 1st Automatic recognition of CPU ID coolsand
Coolsand increases the recognition of some new flash type
SPD6530 automatic reading 32M
MTK 65xx Android 4.0.x Imei repair.


for more details
VolcanoBox 1.9.0 World's 1st Coolsand CPU ID - MTK Android 4.0.9 Imei Repair & More..
Br
Faisal_Computer
Mirror : VolcanoTool_v1.9.0.rar

[soltan03]

[kader phone]

VolcanoBox 1.9.2

Whats new ?

Worlds 1st Mstar Flash for unlock !!
Coolsand detection/Pinfind Solved !!
MTK6250 flashing update

Click here to Download


Details :

What is World's 1st Mstar Flash for Unlock ?

Some Mstar phones come to you shop with usercode. you try to read flash and read it's code. you tried but all codes given by Software is incorrect. You plug other boxes and read codes from all boxes and All boxes given codes you tried but all of them are not working. Mobile says Incorrect code. Now you have only 2 ways left !!

1- You search for flash file
2- you search for same working phone

1- you search for flash file. you waist your important time in search and download and flash your phone. after all results is all available files are completable with your phone. you tried lot of Flash files. some files results is your phone power on but on your phone White screen. some Flash file results is your phone is dead and so on.

2- You search for same working phone. you waist lot of your important time for search same phone in market and you didn't get. if you get you read flash and write on faulty phone result is phone not power up cause of Flash ic difference or LCD white or keybaord not working fine and so on

SO WE RELEASE FLASH FOR UNLOCK OPTION IN MSTAR

what you need to do is. simply read flash of your faulty phone by clicking READ FLASH then click on Flash for unlock and click on run. it will ask you for file give path of your read flash and it will start writing.after writing your phone code will be removed !!

This is World's 1st and unique Solution for those Mstar phones which Show Wrong code after you read code from all Chinese boxes. !!

i don't want to write name of boxes and phone model name which we test. cause of i don't want bla bla.... i am not in Fighting mode

VolcanoBox ver 1.9.2 have firmware update !!!!
when you run it 1st time. do not attach any phone with volcano box. also make sure your pc will not shut down or your will not have Electricity failure...

[عمرو ألسويفى]

Whats new ?

Coolsand add new Boot_B
Coolsand new boot support auto read write flash
Mstar add new cpu support
Mstar New Flash Added
Fixed Mstar Bug

Details:

Volano box Released Coolsand BOOT_B. What is it?

This is for read and write mostly flash ic auto. don't need to select different Flash type. Keep in mind that this is in BETA state. it could have some problems. if you found any problem please report us.
from now you have two type of Boot. One is "Auto"and one is "Boot_B". whenever you run volcanobox keep in mind what you have select up side of software you can near BOOT FILE button. Select BOOT_B from boot and select AUTO from Flash Type and try to read and write different flash ic. at the moment 8851a and some other flash ic will not work on BOOT_B but in upcoming update we will add. So from now please test for us and report us which Flash ic and which Mcu work AUTO in BOOT_B. in 1.9.4 8851a and some other cpu & Flash type we will add. so now we are working on Fully Automatic Coolsand. Hope you will like us & Will Support us in future too.

Click here to download

VolcanoBox Mirror Support Area

World's Fast Online Unlocking Server

Click here to register and get amazing Discount

[عمــــار احمــــد]

Happy Valentines Day

VolcanoBox 1.9.4

Whats new ?

Added RDA 8851 & RDA8852 & some more to new BOOT_B
Added Format & Repair imei to new BOOT_B
Improve Mtk android emmc read & write flash

What is Boot_B ?

Boot_B is for Fully Automated for read & write & format & imei repair !!. This is still in beta. you can try and let us know the bugs and problems. how it will works ?

when ever you got any mobile

Select BOOT_B from BOOT FIle
Select AUTO from Flash Type

and try to do read and write or any other operation which you need to do.

if failed

Select AUTO from BOOT File
Select AUTO from FLASH TYPE

and try to do read and write or any other operation which you need to do.

if failed

Select AUTO from BOOT File
Select your Desire Flash Type

and try to do read and write or any other operation which you need to do.

if failed

Please Report us with all details.

Please make new thread and write which cpu you done on BOOT_B & Flash Type Auto and Which cpu you done on AUTO & Flash Type AUTO. like this we will know what and how we can improve.


Click here to Download
VolcanoBox Mirror Support Area


MTK Universal Drivers

i just make special MTK ALL IN ONE DRIVER. now you don't need to found many drivers. if you have just this ONE DRIVER it will cover your all MTK Drivers needs. This will cover all these needed drivers,

• "MediaTek Inc."
• "MTK USB Port"
• "MTK USB Modem Port"
• "MTK USB Debug Port"
• "MediaTek PreLoader USB VCOM Port"
• "MediaTek DA USB VCOM Port"
• "USB Serial emulation modem driver"

so just download only this ONE Driver and you will have cover all these drivers.

[AhMEd TOhAMY]

whats new ?

Adjust Coolsand new Boot B for Read Flash.
Adjust Coolsand new Boot B for Write Flash.
Adjust Coolsand Find Password Algo.
Added SPD 6610 new IC supported.
Added Manuals/Tutorials to volcano Soft


This is more stable ver for Coolsand. Let me explain you fews things.

1st of all. many users saying volcano is hard to use so we put detailed manual in software. so all can just click and see how to do it .
We will update our manuals on every update so one day all will be in software. this will be too much easy for all of you guys.

check out this GIF




We introduced Coolsand boot B. This is Totally Automatically. you just have to select BOOT_B and Auto from flash type: this is still in beta.

check this gif.




Click here to download

!! Sonyericsson Xperia Unlocking is ready. Contact me privately for Beta Test !!

[اللتر]

---

We are Happy to Announce Grand update
Volcanobox 1.9.6

Whats new ?

1- Added SonyEricsson Xperia phones for Unlock

Here is list

1. x10
2. x10i
3. x10a
4. SO-01B
5. E10i
6. U20
7. X8
8. E15
9. W8
10. E16
11. E16i
12. LT15
13. MK16
14. MT11
15. MT15
16. R800
17. SK17
18. ST15
19. St17
20. ST18
21. WT19
22. Z1
23. SO-01C
24. SO-01D
25. SO-03C
26. S51se
27. LT18

Keep in mind New Security is not supported !!

How To Unlock SonyEricsson Xperia Phones

1st of all you need to install drivers

How to install drivers ?

• Go to Volcanobox\Drivers\SonyXperia
• If you have phone which can be done without TP then open NON_TP_Drivers and install drivers OR if you have phone which can be done with TP then open TP_Drivers and install drivers
• we need to connect the X10 in Flash Mode (it’s called boot mode or Download boot mode)
• Remove battery from phone and insert it again
• Make sure phone is Turned off condition
• Press & Hold “back Button” from phone
• While holding “Back Button” from phone insert/plug Usb cable into phone
• Windows will ask you for drivers. If it’s not install auto then give path of drivers from Volcanobox Folder (Volcanobox\Drivers\SonyXperia)
• Once it’s complete You had done 1st part Now you have to unplug mobile and make it completely power on
• As your mobile powered up Go to settings , Application , Enable “Usb Debugging” ( in some phones USB debugging have in different ******** for example you need to go in settings, Application, Development, or in some phone setting, Development, )
• After Enable Usb debugging connect usb cable to you phone and let it’s install drivers if not driver not install then give path of drivers from Volcanobox folder.
• As it’s complete you are ready to Unlock your phone.

As Drivers installed you can Start Unlocking

• 1. Open VolcanoBox and click on Xperia
• 2. Make sure There is no Simcard in your mobile
• 3. Make sure SD Card ( memory card ) inserted in the phone
• 4. Make sure your phone have not Android ver 1.6 ( you must use 2.1 or later ver of Android )
• 5. Make sure your phone is NOT rooted
• 6. Make sure your phone not have any Custom rom
• 7. Make sure your Internet Connection is work good and Firewall is turned-ff
• 8. Make sure Usb debugging mode is enabled
• 9. Make sure your Antivirus is turned-off
• 10. Cllck on Get Info from VolcanoBox software
• 11. Remove Battery and insert it again
• 12. Press and hold Back Button
• 13. Insert Usb cable while holding Back Button from phone
• 14. If everything ok you will get info about your phone
• 15. Now Click on Unlock
• 16. Repeat operation from 8 to 10
• 17. When software Ask you Remove Usb cable, complete power on your phone, Connect usb cable to phone, ( make sure Use Debugging is enabled )
• 18. Wait till software complete it’s operation.
• 19. Your phone is unlocked !!

Some Common Problems:



Unlock Not OK or Not Detecting Phone?
Possible causes:

• 1. On Vista or Windows 7 32/64 Bit Windows, VolcanoBox must run as administrator (right click , select "run as administrator")

• 2. Firewall or Antivirus is deleting files . Uninstall VolcanoSoftware and turn off antivirus and reinstall.

Phone shows no service after unlock:

• 1. Remove Battery and wait 1 minute. Insert Battery and power on phone.

Software hangs while unlocking or detecting ADB device
Antivirus has deleted important files. Uninstall software.Turn off Antivirus .Download and install software again

TEST Point pictures & this Detailed manual already inside your volcanobox. just run volcano click on Help Manual button right after connect button. then click on How to Unlock Xperia Phones. you will see all details.

2- Coolsand Read / Write / Format More Stable then ever

Volcano Box introduced Boot_B for Coolsand. this is very stable version ever before. i want to share some thing about Coolsand.

Now Coolsand have two different Boots

1- built-in Auto
2- built-in BOOT_B


2- Built-in Boot_B
is fully Auto you don't need to select any thing. just make sure you have selected Boot_B from Boot and Auto from Flash id. if you want to format also you don't need to write any format address. We had tested lot of phones for formatting with 4mb , 8mb , 16mb, and we success. You can see reports from here
Beta Test Volcano Box v1.9.6 Game ON
If somehow you still face some problem please report us on forum or send me pm


1- Built-in AUTO
This is Auto and Manual both. if you select Auto from boot and Auto from Flash id it will work auto. but if somehow you want to do manual work then you can select Auto from boot and Select your DESIRE FLASH ID from flash id and you can do work.

This is still BETA we research lot of new things and we are working on it soon you guys will have Fully Auto and Fully Bugs free ver and Fully Supported coolsand phones. At the moment we support maximum cpu and maximum flash id which still other not do.



3- Coolsand Read USER Area
4- Coolsand Write USER AREA


Read & Write User Area is for repair signals in coolsand phones, Read & Write user area is for repair Usercode problems in Coolsand phones, Read & Write user area is for repair blinking problems, in other words read & write user area is very use full. in other words you can say it's NV. but it have more than NV area



5- Added Write Flash Security for Coolsand


1. In COOLSAND BOOT_B you try to write any file and volcano say to "you Writing this file is risky" This mean your readed flash is not good and volcano will not write your flash file. this is for avoid after write flash mobile dead. if you still want to write this flash file you can use built-in AUTO and select your desire flash id Volcano will write flash file but not sure your mobile will come alive or not or your mobile become dead.






6- Added More Manuals in Volcano box
7- Adjust Coolsand Find pass algorithm
8- Added Alcatel MTK Android Phones for Direct Unlock & Read Code ( Sp Unlock )

here is list

• OT-S600
• OT-S710
• OT-S800
• OT-J610
• OT-S500
• OT-S810
• OT-S820
• OT-S850

Click here to download Full INSTALLER !!

AT ALL BETA TESTERS. PLEASE REDOWNLOAD IT. WE MODIFY IT.