1616 لا يعمل
الجهاز يعمل على الباور سبلاي
ولا يعمل سكان
و لكنه يعمل تشيك
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 5], SN: ********
Using device: HTI, FW ver: 00.50, SN: 00002A24
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0 , NTMP ver: 6.1.7601.17514
Module ver: 1.0.0.19663(13-12-2011), Library ver: 1.0.0.13682(17-12-2011)
Device synchronized.
CPU: XGOLD 110
Using embedded SBL from MCU.
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.19
EBL version : Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 00EC 227A [Samsung ]
و لا يكمل تشيك
و هذا لوج عملية التفليش
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 5], SN: ********
Using device: HTI, FW ver: 00.50, SN: 00002A24
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0 , NTMP ver: 6.1.7601.17514
Module ver: 1.0.0.19663(13-12-2011), Library ver: 1.0.0.13682(17-12-2011)
Do not disconnect or abort this operation otherwise phone will be damaged.
Device synchronized.
CPU: XGOLD 110
Using embedded SBL from MCU.
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.19
EBL version : Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 00EC 227A [Samsung ]
Processing file: rh125_005.800
Downloading item CODE:hw_f11_rh125_r05.800.fls, num block: 3, size: 4.10 MB
Erasing area 0x00800000-0x00A0FFFE ...OK
Programming completed in 46.600 s
Erasing area 0x00C60000-0x00E6843E ...OK
Programming completed in 43.070 s
Erasing area 0x00FFC000-0x00FFC03E ...OK
Programming completed in 0.160 s
Checksum verified (0xEB6C)
Processing file: rh125_005.80ic
Downloading item CUST:hw_f11_rh125_005.80ic.fls, num block: 1, size: 1.93 MB
Erasing area 0x00210000-0x003FC87E ...OK
Programming completed in 40.550 s
Checksum verified (0x974F)
Processing file: rh1250_nai05.80ic
Downloading item CUST:hw_f11_rh1250_nai05.80ic.fls, num block: 1, size: 374.77 KB
Erasing area 0x00EB0000-0x00F0CDFE ...OK
Programming completed in 7.680 s
Checksum verified (0x85FE)
Total time for flashing process(boot+erase+write) was 3 min 29.800 s
و لا يعمل ضبط مصنع
رد مع اقتباس
.gif)
المفضلات