جهاز نوكيا 5130cجاني يقف علي كلمة نوكيا

[walidgsm]

السلام عليكم الرجاء المساعدا في جهاز نوكيا 5130cجاني يقف علي كلمة نوكيا فقمتو بتفلشه علي الامكس كي علي الاسبي وبدا في الفسخ عادي لكن المشكل أنهو عندا المرحلة الاخيرة من التفليش وفي نسبة 50بي المأة انفصل الهاتف عن الكبل فانطفا الجهاز ولم يعد يقبل الفلاش سواء علي السبي أو بي كابل الافبيس سواء علي الامكس أو الامتي أو البسة أنفنتي أو الجاف وفي كل مرة يكتب cmt boot error

[basem the ghost]

فلش الهاتف بدون كاميرا

[walidgsm]

سأقومو بي المحاولة وأوافيك بي الرد

[walidgsm]

لقد قمتو بمحولة علي الامتي بكابل السبي وهدي النتيجة

10dbef86a: 210DBEF86A - Nokia Flash/Repair v2.41
Box: CR V 2.001 22528
Code: NK V 2.001 1056
SN: xxxxxxxx
Nokia Unlimited: 253 times started
SonyEricsson Unlimited: 35 times started
FAILED to find USB Device.
Attach phone to usb port!
Switched to USB BUS
Using Tx2 Data line.
Processing File: rm495__07.97.mcusw
Boot...
CONNECT PHONE to USB and Power ON phone!
Pooling for phone...
\\?\nmwcd#vid_0421&pid_0106&if_oth#7&214bfea5&0&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Sending ULO code
Sending UPDAPP code
Sending PASUBTOC code
Pooling for device removal...
Device removed
Pooling for ADL device...
Raw flashing...

%%%%%%%% ERROR BOOTING:

[سوفت وير +]

فلش على برنامج الفوينكس

[good boy]

فلش الهاتف بكبل fbus علي اي بكس

[walidgsm]

لقد حاولة علي الفونيكس وهدا لوق التفليش

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 14592 bytes
Secondary boot loaded
Loading update server code: 308032 bytes
Update server loaded
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Failed to set phone to flashmode
Starting to recover the phone

[walidgsm]

وهدا لوق التفليش بكابلfbus علي الامتي
VPP is DISABLED.
Using Tx2 Data line.
Processing File: rm495__07.97.mcusw
Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 0001FFFF]
Erase RAP3 [00040000 - 000BFFFF]
Erase RAP3 [000C0000 - 0013FFFF]
Erase RAP3 [00140000 - 0137FFFF]
Erase RAP3 [01380000 - 0151FFFF]
Erase[21.00 MB]...
in 0.06s
Flash[18.18 MB]...
Data Error!!
Check TX2 line!

%%%%%%%% ERROR SENDING FLASH:
Failed at address 00000000
وهدا علي الامكس
MXKEY Serial: [FT SCR2000 0] - C080BA62
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Connection status: UHCI:HUB:HUB:USB 1.10 (Full-speed)
Driver: UFS2XX, ver: 1.6.14.0 , NTMP ver: 1.6.14.1
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0620020CF9F5585006BF1684634C0DCECAD37F4C
ASIC MODE ID: 00
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
eBB5ProtocolType: OLD
Storage0: 0089 8982 - 0000 0000 [Intel NU48F512,512 Mbits] type: FLASH,NOR, asic:CMT
Storage content: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo_131.fg [BB5 ALGORITHM] version: 1.31.0 revision: 0.0 size: 0x297E0
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS is blank/erased.
TransmissionMode: DDR&TX2
Processing MCU file: rm495__07.97.mcusw
[BB5,BB5 ALGORITHM] size: 18.20 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Storing certificate [NPC, VARIANT, R&D, CCC, HWC] ...OK
Erase size: 21 MB
CMT FLASH,NOR area [00000000-000006BF]
CMT FLASH,NOR area [000006C0-0001FFFF]
CMT FLASH,NOR area [00040000-000BFFFF]
CMT FLASH,NOR area [000C0000-0013FFFF]
CMT FLASH,NOR area [00140000-0137FFFF]
CMT FLASH,NOR area [01380000-0151FFFF]
erased in 4.922 s
Prog.status for Asic CMT ...
NOR: Success
Flash programming ...
Error chk C7012D0103CD000090000000F1
RX2 not responding, please check BSI/cable/pinout !
Error while programming [00] at 0x00000400, Result: 0090
Total time for flashing process(boot+erase+write) was 14.016 s

[walidgsm]

وهدا الوق علي الجاف بكابلfbus
MXKEY Serial: [FT SCR2000 0] - C080BA62
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Connection status: UHCI:HUB:HUB:USB 1.10 (Full-speed)
Driver: UFS2XX, ver: 1.6.14.0 , NTMP ver: 1.6.14.1
Module ver: 1.0.0.18624(06-08-2011), Library ver: 1.0.0.12274(06-08-2011)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0620020CF9F5585006BF1684634C0DCECAD37F4C
ASIC MODE ID: 00
ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
ROM ID: 273F6D55DFAAF68F
SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
eBB5ProtocolType: OLD
Storage0: 0089 8982 - 0000 0000 [Intel NU48F512,512 Mbits] type: FLASH,NOR, asic:CMT
Storage content: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo_131.fg [BB5 ALGORITHM] version: 1.31.0 revision: 0.0 size: 0x297E0
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS is blank/erased.
TransmissionMode: DDR&TX2
Processing MCU file: rm495__07.97.mcusw
[BB5,BB5 ALGORITHM] size: 18.20 MB
Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
Storing certificate [NPC, VARIANT, R&D, CCC, HWC] ...OK
Erase size: 21 MB
CMT FLASH,NOR area [00000000-000006BF]
CMT FLASH,NOR area [000006C0-0001FFFF]
CMT FLASH,NOR area [00040000-000BFFFF]
CMT FLASH,NOR area [000C0000-0013FFFF]
CMT FLASH,NOR area [00140000-0137FFFF]
CMT FLASH,NOR area [01380000-0151FFFF]
erased in 4.922 s
Prog.status for Asic CMT ...
NOR: Success
Flash programming ...
Error chk C7012D0103CD000090000000F1
RX2 not responding, please check BSI/cable/pinout !
Error while programming [00] at 0x00000400, Result: 0090
Total time for flashing process(boot+erase+write) was 14.016 s

[MoHaMeD GaZaL]

الهاتف لن يقوم الا عن طريق كيبل fbus ويفضل على بوكس ال hwk لانه يحتاج الى تفليش منطقة cmt ولا تستطيع تفليشها على كيبل usb