مشكل مع mt15i

[smartrrr]

الهاتيف كان يعمل جاييدان لاكين اردتو فك الشفراعنطريق test piont فلم يعود يشتعيل
عيندا رابطوه بيلحسوب يتعرف عليه كما في صورة




Uploaded with ImageShack.us

[hadjimi]

هل الجهاز يعمل إيدونتفي ، ممكن ترفعه لنا ؟؟

[smartrrr]

setool لا تتعرف عليه

[حسني الوهراني]

انت قمت بعملية التاست بوين بالخطا
مدام لا تتعرف عليه السيتول
اعتقد يبقى هارد

[smartrrr]

نعم اخي حسني الوهراني المشكل test piont

هل لديك فكرة عن تسليح هد مشكيل

[smartrrr]

adon ana alhatif 9ad mat wa yajib tasli7 alboot

[hadjimi]

جرب إيصال الهاتف بالتيست بوينت ثم إعمل ريكوفري مع التعليم على
signed mode + alt bypass

q:
during second stage of testpoint unlock procedure i made testpoint wrong/disconnect phone/etc - my phone dead, but i have security units backup.


a:
that can be fixed more or less easy.

step I.

1. pda tab, select lt15_arc as model
2. options tab, check : signed mode, alternative security bypass
3. pda tab, press "recovery"

if you will get output like
Code:

MINOR ERROR [ MISC_CLASS: MISC_ERROR, TA_invalid,_format_may_be_required ]
MINOR ERROR [ MISC_CLASS: MISC_ERROR, TA_invalid,_format_may_be_required ]

then and only then perform next step, otherwise skip to step IV
step II.

1. pda tab, select lt15_arc as model
2. options tab, check : signed mode, alternative security bypass, format gdfs during write
3. pda tab, select trim area package files for your phone model ( DO NOT UNPACK, DO NOT UNZIP, DO NOT TOUCH IT IN ANY WAY ) in misc. edit
4. press "write gdfs"

step III.

1. pda tab, select lt15_arc as model
2. options tab, check : signed mode, alternative security bypass
3. pda tab, select YOUR BACKUP ******
4. press "write ******"

step IV.

1. pda tab, select lt15_arc as model
2. options tab, check : signed mode
3. pda tab, add needed firmware files ( DO NOT UNPACK ) ( BOTH APP and FSP) to fw area
4. press "flash"

[smartrrr]

SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110000000000

DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE

PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" BUTTON ...

RUNNING S1_LOADER VER "R4A062"
LOADER AID: 0001
can't get S1 command header
LOADER NOT RESPONDING
Elapsed: 63 secs.

[hadjimi]

هنا يقول لك أن المشكل هاردوير
كرر العملية وتأكد من التيست بوينت