قائمة الاعضاء المشار اليهم
النتائج 1 إلى 4 من 4

الموضوع: نوكيا 5800

  1. #1
    .: جيماوي فعال :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2007
    الدولة
    المغرب
    Phone
    غير قار
    المشاركات
    280
    الشكر
    28
    شُكر 112 فى 61 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    21

    افتراضي نوكيا 5800

    عندي هاتف نوكيا 5800 بيرستر قمت بتفليشه بأعلى فرجن الهاتف يهتز عند التشغيل فقط قمت بتنزيل الفرجن الدي كان فيه من قبل مع مراعاة الضغط على زر downgrade
    الهاتف يبقى على حاله
    قمت بعمل فل ايريز للهاتف من بعد فلشت بأعلى فرجن الهاتف يشتقل عندا يكون الايمي مضروب لكن عند ارجاع rpl للهاتف تطلع نوكيا في الشاشة وينطفئ
    وهدا أنفو الجهاز
    MCU Version V ICPR72_10w04.5
    MCU Date 22-03-10
    Product RM-356 (Nokia 5800 XpressMusic)
    Manufacturer (c) Nokia
    IMEI 355383046667706
    Mastercode 7627634221
    IMEI Spare 3A55830364667700
    IMEI SV 3355830364667760F0000000
    CNT v 50.2010.06.1_001_000_U01, 17-03-10, vanilla, RM356
    PSN MOK654528
    Product Code 0573740
    PSD 0000000000000000
    LPSN 0
    WLAN MAC 78CA0406813A
    APE SW V 50.0.005
    APE Variant V 50.0.005V 50.0.005 V 50.0.005
    APE Test eno_version
    APE HW 256
    APE ADSP 256
    RETU 16
    TAHVO 22
    AHNE 11
    HW 2003
    RFIC 17141716
    DSP ICPR72_10w05
    Simlock Server SIMLOCK SERVER
    Simlock Key 2440700000000000
    Simlock Profile 0000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [1,2] State: OPENED Type: GID Data: FFFF
    Simlock [1,3] State: OPENED Type: GID Data: FFFF
    Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [2,2] State: OPENED Type: GID Data: FFFF
    Simlock [2,3] State: OPENED Type: GID Data: FFFF
    Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [3,2] State: OPENED Type: GID Data: FFFF
    Simlock [3,3] State: OPENED Type: GID Data: FFFF
    Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [4,2] State: OPENED Type: GID Data: FFFF
    Simlock [4,3] State: OPENED Type: GID Data: FFFF
    Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [5,2] State: OPENED Type: GID Data: FFFF
    Simlock [5,3] State: OPENED Type: GID Data: FFFF
    Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [6,2] State: OPENED Type: GID Data: FFFF
    Simlock [6,3] State: OPENED Type: GID Data: FFFF
    Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [7,2] State: OPENED Type: GID Data: FFFF
    Simlock [7,3] State: OPENED Type: GID Data: FFFF
    Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    وهدا الاناليز سيكيورتي
    Started Phone Security Analysis...
    MCU Version V ICPR72_10w04.5
    MCU Date 22-03-10
    Product RM-356 (Nokia 5800 XpressMusic)
    Manufacturer (c) Nokia
    IMEI 355383046667706
    Mastercode 7627634221
    Reading Security Block...
    Security block OK and saved to "RM-356_355383046667706_1032011_30128 AM.SecurityBlock.PM"
    Step 1 : Testing SIMLOCK
    SIMLOCK SEFLTEST PASSED OK!
    Step 2 : Testing SECURITY
    -- SECURITY PROBLEM --

    Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED!
    To repair it, simply slick "SX4 Authorization / SD Repair" button.
    After SX4/SD Repair, don't forget to write PM file with fields 1,309 (if SW don't do this automatically)

    Additionaly, Checking HWC/CCC Certs...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 16600014EAAE0052C8FDC246D3BACE9206ED738F
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.24.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.5 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.11.24.0, Algo: XSR 1.5
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 76A20187051C30162EE91C77AE5E6011F5F1BA61
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    HWC Looks OK!
    CCC Looks OK!
    Restarting MCU...
    -- SECURITY PROBLEM --
    Step 3 : Analyzing Security Block
    "16600014EAAE0052C8FDC246D3BACE9206ED738F.C0004187" Exists, That is good...
    Checking SUPERDONGLE...
    SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
    Checking SIMLOCK...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking MCU&DSP TIMESTAMPS...
    MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
    Checking CMLA KEYS...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking ECC KEYS...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking DIV KEYS...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Analyze finished!
    هل هناك حل لهدا المشكل وشكرا



    التعديل الأخير تم بواسطة monime ; 03-10-2011 الساعة 05:55 AM

  2. # ADS
    Circuit advertisement
    تاريخ التسجيل
    Always
    الدولة
    Advertising world
    المشاركات
    Many
  • # ADS

    تاريخ التسجيل
    Always
    الدولة
    Advertising world
    المشاركات
    Many


  • #2
    صديق المنتدى
    الصورة الرمزية NAPOLI

    الحالة
    غير متواجد
    تاريخ التسجيل
    Nov 2008
    Sonork
    ورفعنا لك ذكرك
    المشاركات
    5,520
    الشكر
    15,756
    شُكر 7,882 فى 3,405 مشاركة
    تم تذكيره فى
    1 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    140

    افتراضي رد: نوكيا 5800

    قم بعمل
    Authorize Repair SD keys
    ثم كتابة pm اللي في المرفق
    ثم ارفع اناليز

  • #3
    .: جيماوي فعال :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2007
    الدولة
    المغرب
    Phone
    غير قار
    المشاركات
    280
    الشكر
    28
    شُكر 112 فى 61 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    21

    افتراضي رد: نوكيا 5800

    جربتها ولم تنفع أخي وهدا الاناليز
    Started Phone Security Analysis...
    MCU Version V ICPR72_10w25.4
    MCU Date 23-02-11
    Product RM-356 (Nokia 5800 XpressMusic)
    Manufacturer (c) Nokia
    IMEI 355383046667706
    Mastercode 7627634221
    Reading Security Block...
    Security block OK and saved to "RM-356_355383046667706_1032011_13020 PM.SecurityBlock.PM"
    Step 1 : Testing SIMLOCK
    SIMLOCK SEFLTEST PASSED OK!
    Step 2 : Testing SECURITY
    -- SECURITY PROBLEM --

    Phone have failed SECURITY Test, that means Superdongle Area is DAMAGED!
    To repair it, simply slick "SX4 Authorization / SD Repair" button.
    After SX4/SD Repair, don't forget to write PM file with fields 1,309 (if SW don't do this automatically)

    Additionaly, Checking HWC/CCC Certs...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 16600014EAAE0052C8FDC246D3BACE9206ED738F
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.24.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    If software STUCK HERE with box TX LED lit, that means:
    1. You have not attached yellow TX2 Adapter (IT IS REQUIRED FOR BB5 PHONES WHEN USING JAF/UFS CABLES!)
    2. Your cable is not TX2 Enabled!
    3. Transmission error occured, try again
    In either cases, you need to reconnect your box from USB.
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.5 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.11.24.0, Algo: XSR 1.5
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 76A20187051C30162EE91C77AE5E6011F5F1BA61
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    HWC Looks OK!
    CCC Looks OK!
    Restarting MCU...
    -- SECURITY PROBLEM --
    Step 3 : Analyzing Security Block
    "16600014EAAE0052C8FDC246D3BACE9206ED738F.C0004187" Exists, That is good...
    Checking SUPERDONGLE...
    SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
    Checking SIMLOCK...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking MCU&DSP TIMESTAMPS...
    MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
    Checking CMLA KEYS...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking ECC KEYS...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking DIV KEYS...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Analyze finished!

  • #4
    صديق المنتدى
    الصورة الرمزية NAPOLI

    الحالة
    غير متواجد
    تاريخ التسجيل
    Nov 2008
    Sonork
    ورفعنا لك ذكرك
    المشاركات
    5,520
    الشكر
    15,756
    شُكر 7,882 فى 3,405 مشاركة
    تم تذكيره فى
    1 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    140

    افتراضي رد: نوكيا 5800

    اخي ارفع تشيك الجهاز
    مع rpl بعد عمل نسخة عنه
    التعديل الأخير تم بواسطة NAPOLI ; 03-10-2011 الساعة 07:37 PM

  • الكلمات الدلالية لهذا الموضوع

    المفضلات

    المفضلات

    ضوابط المشاركة

    • لا تستطيع إضافة مواضيع جديدة
    • لا تستطيع الرد على المواضيع
    • لا تستطيع إرفاق ملفات
    • لا تستطيع تعديل مشاركاتك
    •