e52 phone start-up failed.

[ghasaan]

عندي جهاز e52 عند التشغيل يكتب phone start-up failed. contact the retailer.
وهذا اسكان على ام اكس كي
Phone Type: RM-469 (Nokia E52-1)
SW Version: V ICPR82_10w22.10 03-01-11 RM-469 (c) Nokia
Imei plain: 35521603112028-3
Product Code: 0596386
Battery voltage: 3821 mV, current: 123 mA
ApeCoreSw: 054.003
Language Pack:
- not available.
Detected as PA_SL3 phone.
- Avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!


Imei net: 355216031120283
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
أرجو المساعدة ولكم جزيل الشكر

[hadjimi]

مثبــت: .:: جميع الحلول الخاصة بتصليح Security Test Fail ::. ‏

[NAPOLI]

اسحب باكب كامل
اكتب pm الحقل
1-309

[ghasaan]

عندما أعطي الجهاز pm يعطي هذه الكتابة
SERVER->Served by MXKEY - BLADE X at host2, agent version 1.1 revision 0.7
MXKEY Serial: [FT SCR2000 0] - C080C670
Using device: AdvanceBox Turbo Flasher
Driver: usbehci:usbhub:usbhub:usbccgp:FTDIBUS, ver: 2.8.14.0 , NTMP ver: 2.8.14.0
Module ver: 1.0.0.17787(26-06-2011), Library ver: 1.0.0.11831(28-06-2011)

Product: V ICPR82_10w22.10 03-01-11 RM-469 (c) Nokia
ApeCoreSw: 054.003

SYSTEM ASIC ID: 000000030000022600010007600C192102011104 [RAPU ver: 1.1]
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 56.65 KB
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104
Sending Overflow Loader(0x2E4 bytes) ...
Overflow loader running ..
Sending CustomLoader ...OK
ERROR: Sec. data error !
Scanning local SX4 Card ...
No SX4 Card found.
SERVER->Served by MXKEY - BLADE X at host2, agent version 1.1 revision 0.7
Authenticating using security server ...
Connecting to server[main.mxkey.biz] ...MXKEY SX4CARD - ID, hello 78.155.89.6
Bad phones ack, probably SUPERDONGLE_KEY corrupted !
Wrong response to SD verify request
SERVER->Served by MXKEY - BLADE X at host2, agent version 1.1 revision 0.7
Authenticating using [MX] security server ...
Connecting to server[main.mxkey.biz] ...MXKEY SX4CARD - ID, hello 78.155.89.6
Bad phones ack, probably SUPERDONGLE_KEY corrupted !
Wrong response to SD verify request

[ghasaan]

هل من حل لهذه المشكلة أرجو المساعدة ولكم جزيل الشكر

[NAPOLI]

اخي ارفع سكان بالوضع الحالي

[ghasaan]

تفضل اخي الكريم وشكر على المساعدة ولكن نفس المشكلة وهذا اسكان
Phone Type: RM-469 (Nokia E52-1)
SW Version: V ICPR82_10w22.10 03-01-11 RM-469 (c) Nokia
Imei plain: 35521603112028-3
Product Code: 0596386
Battery voltage: 3789 mV, current: 126 mA
ApeCoreSw: 054.003
Language Pack:
- not available.
Detected as PA_SL3 phone.
- Avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!


Imei net: 355216031120283
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

[نصير الاسلام]

قم بكتابة الحقل 1 والحقل 309 من اي ملف بي ام e52 دمت بخير

[ghasaan]

ولكن كيف تتم الكتابة أنا اقوم بكتابة الملف عن طريق ام اكس كي وشكرا

[IslaM SoloMa]

عندما أعطي الجهاز pm يعطي هذه الكتابة
SERVER->Served by MXKEY - BLADE X at host2, agent version 1.1 revision 0.7
MXKEY Serial: [FT SCR2000 0] - C080C670
Using device: AdvanceBox Turbo Flasher
Driver: usbehci:usbhub:usbhub:usbccgp:FTDIBUS, ver: 2.8.14.0 , NTMP ver: 2.8.14.0
Module ver: 1.0.0.17787(26-06-2011), Library ver: 1.0.0.11831(28-06-2011)

Product: V ICPR82_10w22.10 03-01-11 RM-469 (c) Nokia
ApeCoreSw: 054.003

SYSTEM ASIC ID: 000000030000022600010007600C192102011104 [RAPU ver: 1.1]
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 56.65 KB
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104
Sending Overflow Loader(0x2E4 bytes) ...
Overflow loader running ..
Sending CustomLoader ...OK
ERROR: Sec. data error !
Scanning local SX4 Card ...
No SX4 Card found.
SERVER->Served by MXKEY - BLADE X at host2, agent version 1.1 revision 0.7
Authenticating using security server ...
Connecting to server[main.mxkey.biz] ...MXKEY SX4CARD - ID, hello 78.155.89.6
Bad phones ack, probably SUPERDONGLE_KEY corrupted !
Wrong response to SD verify request
SERVER->Served by MXKEY - BLADE X at host2, agent version 1.1 revision 0.7
Authenticating using [MX] security server ...
Connecting to server[main.mxkey.biz] ...MXKEY SX4CARD - ID, hello 78.155.89.6
Bad phones ack, probably SUPERDONGLE_KEY corrupted !
Wrong response to SD verify request

المشكله هنا انه لايقبل عمل super dongle auth


بعد عمل read pm

علم علي الحقل 1 & 309

ثم اضغط ppm auth

لحد ما السوبر دنجل يبيقي authorized

ثم اضغط write pm