قائمة الاعضاء المشار اليهم
النتائج 1 إلى 4 من 4

الموضوع: نوكيا 6120

  1. #1
    عضو موقوف

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jan 2009
    الدولة
    تونس
    Phone
    6110n
    المشاركات
    1,807
    الشكر
    18
    شُكر 276 فى 213 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    Question نوكيا 6120

    عندما اقوم فتح الهاتف يصبح شاشه بيضاء ثم ينغلق الهاتف فقومت بتفليش لكن بقية المشكل

    Core version : 1.29 Rev : 1.0

    Selected FlashSettings : Manual
    Files Set for Flashing :
    MCU : rm243_07.20_prd_core.fpsx
    PPM : rm243_07.20_prd_vEM09_01_elisa_fi.fpsx
    CNT : rm243_07.20_prd_uda_erase.fpsx
    Check FlashFiles, Please, wait...
    -> SWversion check skipped : Dead mode selected

    Backup enabled, Will read Certificates now...
    Setting FlashMode
    FlashMode set Ok

    1st boot Ok, C0

    CMT part info :
    CMT ASICID : 000000010000022600010006400C192101021103
    CMT EM0 ID : 00000295
    CMT EM1 ID : 00000B22
    CMT PUB ID : 1C5001032C800058FEAB1D870AD6C9AA76626695
    CMT MODE ID : 00
    CMT R_HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT ROM ID : A8C1D6713E691FF8

    CMT : Sending 2nd loader...
    Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
    CMT Loader sent, Boot Ok
    MCU Configuration
    MCU Cfg Ok , 03
    FLASHID : 003000EC , CMT , NAND
    CMT Flash ID : 003000EC < SAMSUNG [SEC] => K5W1G13ACB
    FLCNT : 00030000000000000000000000000000000000
    FLASHID : 0000FFFF , CMT , MMC , EXT
    CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
    Sending ALGO....
    Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0
    CMT Algo sent
    CMT PAPUB : 0FE1BA92D924A658E4800780FA6F4868100AC9475A
    Transmission mode : Dual (Ddr, TX2)

    Boot Done!

    CMT : Read NPC certificate...
    Cert size : 2048 byte(s)
    IMEI : 358641013112643
    CMT : Read CCC certificate...
    Cert size : 1024 byte(s)
    CMT : Read HWC certificate...
    Cert size : 1024 byte(s)
    CMT : Read VARIANT certificate...
    Cert size : 0 byte(s)
    Cert Read done!


    Init Service mode... Wait...

    Init Service Mode Failed!
    NPC Certificate saved...
    CCC Certificate saved...
    HWC Certificate saved...

    RPL saved : c:\InfinityBox\BEST\Backup\Cert\358641013112643_CRT.rpl

    Setting FlashMode
    FlashMode set Ok

    1st boot Ok, C0

    CMT part info :
    CMT ASICID : 000000010000022600010006400C192101021103
    CMT EM0 ID : 00000295
    CMT EM1 ID : 00000B22
    CMT PUB ID : 1C5001032C800058FEAB1D870AD6C9AA76626695
    CMT MODE ID : 00
    CMT R_HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT ROM ID : A8C1D6713E691FF8

    CMT : Sending 2nd loader...
    Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
    CMT Loader sent, Boot Ok
    MCU Configuration
    MCU Cfg Ok , 03
    FLASHID : 003000EC , CMT , NAND
    CMT Flash ID : 003000EC < SAMSUNG [SEC] => K5W1G13ACB
    FLCNT : 00030000000000000000000000000000000000
    FLASHID : 0000FFFF , CMT , MMC , EXT
    CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
    Sending ALGO....
    Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0
    CMT Algo sent
    CMT PAPUB : 0FE1BA92D924A658E4800780FA6F4868100AC9475A
    Transmission mode : Dual (Ddr, TX2)

    Boot Done!

    Partitioning....
    Partitioning Ok...
    Transmission mode : Dual (Ddr, TX2)
    Erase : Processing rm243_07.20_prd_core.fpsx
    Found 3 areas to erase, erase group
    Asic : CMT , Sub : NAND
    CMT , NAND , Area : 0x00040000 - 0x00082FFF
    CMT , NAND , Area : 0x00083400 - 0x0087FFFF
    CMT , NAND , Area : 0x00B80000 - 0x04DFFFFF
    Erasing, wait.....
    CMT : Group erase Ok
    Erase Partition 0x0A , CMT , NAND
    CMT : Partition erase Ok
    TIME : Erase time : 00:00:01
    PrReq : NOR , 00
    PrReq : NAND , 000300000000020000000200000000
    Transmission mode : Dual (Ddr, TX2)
    Write : Processing rm243_07.20_prd_core.fpsx
    CMT: Writing Hash CERT [ADA]
    CMT: Writing Hash CERT [KEYS]
    CMT: Writing Hash CERT [PRIMAPP]
    CMT: Writing Hash CERT [RAP3NAND]
    CMT: Writing Hash CERT [PASUBTOC]
    CMT: Writing Hash CERT [PAPUBKEYS]
    CMT: Writing Hash CERT [SOS*UPDAPP]
    CMT: Writing Hash CERT [SOS*DSP0]
    CMT: Writing Hash CERT [SOS*ISASW]
    CMT: Writing Hash CERT [SOS*CORE]
    CMT: Writing Hash CERT [SOS+ROFS]
    Total writen 359 blocks
    TIME : Write time : 00:03:49

    PrReq : NOR , 00
    PrReq : NAND , 000300000000020000000200000000

    Transmission mode : Dual (Ddr, TX2)
    Erase : Processing rm243_07.20_prd_vEM09_01_elisa_fi.fpsx
    Found 1 areas to erase, erase group
    Asic : CMT , Sub : NAND
    CMT , NAND , Area : 0x03300000 - 0x04DFFFFF
    Erasing, wait.....
    CMT : Group erase Ok
    TIME : Erase time : 00:00:00
    PrReq : NOR , 00
    PrReq : NAND , 000300000000020000000200000000
    Transmission mode : Dual (Ddr, TX2)
    Write : Processing rm243_07.20_prd_vEM09_01_elisa_fi.fpsx
    CMT: Writing Hash CERT [SOS+ROFX]
    Total writen 185 blocks
    TIME : Write time : 00:02:06

    PrReq : NOR , 00
    PrReq : NAND , 000300000000020000000200000000

    ConvertImage: Processing rm243_07.20_prd_uda_erase.fpsx
    ConvertImage: Page Size is 128K, no need convert
    Transmission mode : Dual (Ddr, TX2)
    Erase : Processing rm243_07.20_prd_uda_erase.fpsx
    Found 1 areas to erase, erase group
    Asic : CMT , Sub : NAND
    CMT , NAND , Area : 0x04E00000 - 0x07B3FFFF
    Erasing, wait.....
    CMT : Group erase Ok
    TIME : Erase time : 00:00:00
    PrReq : NOR , 00
    PrReq : NAND , 000300000000020000000200000000
    Transmission mode : Dual (Ddr, TX2)
    Write : Processing rm243_07.20_prd_uda_erase.fpsx
    Total writen 0 blocks
    TIME : Write time : 00:00:00

    PrReq : NOR , 00
    PrReq : NAND , 000300000000020000000200000000


    Init Service mode... Wait...

    Init Service mode Failed! Skip AfterFlash
    Connect phone on selected interface...

    Connect phone on selected interface...




  2. # ADS
    Circuit advertisement
    تاريخ التسجيل
    Always
    الدولة
    Advertising world
    المشاركات
    Many
  • # ADS

    تاريخ التسجيل
    Always
    الدولة
    Advertising world
    المشاركات
    Many


  • #2
    عضو موقوف

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jan 2009
    الدولة
    تونس
    Phone
    6110n
    المشاركات
    1,807
    الشكر
    18
    شُكر 276 فى 213 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    افتراضي رد: نوكيا 6120

    وهذا عن طريق mx
    CMT Data :
    SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
    EM0 ID: 00000295
    EM1 ID: 00000B22
    PUBLIC ID: 1C5001032C800058FEAB1D870AD6C9AA76626695
    ASIC MODE ID: 00
    ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
    ROM ID: A8C1D6713E691FF8
    SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
    Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
    FlashID0: 00EC 0030 - 0040 0121 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: MuxOneNAND,CMT
    ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
    TransmissionMode: 16Bit
    Algorithm: RAPIDOv11_algo.fg [XSR 1.5] version: 1.40.0 revision: 0.0 size: 0x27520
    Supported Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
    CMT PAPUBKEYS HASH: 0FE1BA92D924A658E4800780FA6F4868100AC947
    TransmissionMode: DDR&TX2
    Processing MCU file: rm243_07.20_prd_core.fpsx
    [BB5,XSR 1.5] size: 43.63 MB
    Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101011105, 400C192101011105, 4003192101021105, 400C192101021105, 400C192101031105, 4003192101031105, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103, 4003192101051105, 400C192101051105
    Storing certificate [NPC, CCC, HWC, R&D] ...OK
    Partitioning ...OK
    Erase size: 74.81 MB
    CMT MuxOneNAND area [00040000-00082FFF]
    CMT MuxOneNAND area [00083400-0087FFFF]
    CMT MuxOneNAND area [00B80000-04DFFFFF]
    Formating partition ...
    erased in 1.140 s
    Flash programming ...
    CMT ADA block sent
    CMT KEYS block sent
    CMT PRIMAPP block sent
    CMT RAP3NAND block sent
    CMT PASUBTOC block sent
    CMT PAPUBKEYS: 0FE1BA92D924A658E4800780FA6F4868100AC947 (RAP Certificate 68 v1) sent
    CMT SOS*UPDAPP block sent
    CMT SOS*DSP0 block sent
    CMT SOS*ISASW block sent
    CMT SOS*CORE block sent
    CMT SOS+ROFS block sent
    Programming completed in 3 min 43.266 s
    Processing PPM file: rm243_07.20_prd_vEM09_01_elisa_fi.fpsx
    [BB5,XSR 1.5] size: 22.77 MB
    Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101011105, 400C192101011105, 4003192101021105, 400C192101021105, 400C192101031105, 4003192101031105, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103, 4003192101051105, 400C192101051105
    Erase size: 27 MB
    CMT MuxOneNAND area [03300000-04DFFFFF]
    erased in 0.422 s
    Flash programming ...
    CMT SOS+ROFX block sent
    Programming completed in 2 min 3.062 s
    Processing CNT file: rm243_07.20_prd_uda_erase.fpsx
    [BB5,XSR 1.5] size: 300 Bytes
    Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101011105, 400C192101011105, 4003192101021105, 400C192101021105, 400C192101031105, 4003192101031105, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103, 4003192101051105, 400C192101051105
    Erase size: 45.25 MB
    CMT MuxOneNAND area [04E00000-07B3FFFF]
    erased in 0.703 s
    Flash programming ...
    Programming completed in 0.000 s
    Total time for flashing process(boot+erase+write) was 5 min 57.516 s

    Phone not responding !

  • #3
    صديق المنتدى
    الصورة الرمزية نـاصـر الشـافـعي

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2007
    الدولة
    Mansoura
    العمر
    35
    Phone
    Iphone 4G
    المشاركات
    5,574
    الشكر
    5,424
    شُكر 8,326 فى 2,739 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    259

    افتراضي رد: نوكيا 6120

    قم بتنزيل ملف اينو وملف بلانك

  • #4
    عضو موقوف

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jan 2009
    الدولة
    تونس
    Phone
    6110n
    المشاركات
    1,807
    الشكر
    18
    شُكر 276 فى 213 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    افتراضي رد: نوكيا 6120

    ممكن توضيح اكثر

  • الكلمات الدلالية لهذا الموضوع

    المفضلات

    المفضلات

    ضوابط المشاركة

    • لا تستطيع إضافة مواضيع جديدة
    • لا تستطيع الرد على المواضيع
    • لا تستطيع إرفاق ملفات
    • لا تستطيع تعديل مشاركاتك
    •