الجزء الثانى
مشكلة
Error: Erase Flash
onnecting...Please hold on the POWER key until the red gauge is going...
Failed to read HardCode, REG=0x80000008
Error: Failed to read REG=0x80010008
Error: Failed to read REG=0x84010008
Error: Failed to read REG=0x80001008
يجب التاكد من الكابل اولا ومن سوكت الجهاز غير ذلك تكون المشكله هارد وير
مشكلة
example40%توقف التفليش عند نسبه معينه
نقوم بعمل full earse
وديه ادريسات المسح
for 8MB : 0x00800000
for 16MB: 0x01000000
for 32MB: 0x0200000
for 64MB: 0x0400000
وبعد عمل الفول ايرس نقوم بالتفليش وسيكتمل التفليش
مشكلة
عند تفليش chip 6217
6217 flash chip must select
ver 3.848 from boot list other boots work not Good
مشكلة
عند التفليش تظهر الرساله الاتيه
problem : Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: A560.SW.V00.02.YIDALONG
Changing baudrate to 921600
115200 يجب تغيير السرعه الى
مشكلة
Error: Failed to read ACK, Please select or cancel the ¡°Buff PGM¡±option in the global settings
تعلم امام الايقونه اللى فى الصوره
.
غير ذلك المشكله هارد وير
مشكلة
Reading FileSystem info...
Error: Get Flash die baseaddress
تحتاج الى تفليش الجهاز
وده راجع الى ان الموبيل غير مدعوم تفليشه او الفورمات له حاليا
مشكلة
simple Method for 6225 flash chips phones (imei changing )
in (**** option) Face Problem check log
Quote:
Initializing...
DA_LIB_VER_3.2.2.7
Tip: The phone must be able to power-on normally
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter ****...
Connected...can release Power button now, tracking...
mean phone not able to enter in **** mode (using tracker )
Ans : simple method to solved the problem just select AT mode From imei tab list and try once again here is the log tested some models and working good
المفضلات