مساعده في x6 rm 559 memory 16
السلام عليكم ورحمه الله وبركاته
ازيكو يا شباب
جالي جهاز x6 rm 559 memory 16
عند الفتح بيشتغل الهزاز فقط من غير اي حاجه تانيه ويقف الجهاز علي كدا من غير حتي شاشه بيضا او سودا
اديتله الاصدارين دول علي التربو فلاش
X6_RM-559_V30.0.003_ARABIC
X6_RM-559_V31.0.004_ARABIC
وبرضه نفش الكلام
اول حاجه عاوز استفسر عنها
في اكتر من ملف في الفلاشه
والادغانسد فيه 3 تبويبات فقط
لل mcu
ppm
cnt
والفلاشه فيها اكتر من ملف
صوره الملفات ياريت تحديد نوع كل ملف وكيفيه اختياره
ازاي اخلي التربو يفلش ال6 ملفات دول مع بعض
ثانيا ده الاسكان بتاع الجهاز علي التربو
Forcing Test Mode via BUSCHECK...
AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
VBATT OFF...
VBATT ON
Setting VBATT Done!...
AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
******************************************************
TIME STARTS HERE
******************************************************
BootFlashModeDCT5Ex Succeeded after 2 Attempts
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 400C1921
ID DWORD 4 : 01051103
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000296
3 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000B22
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 01000108
ID DWORD 1 : C48B0052
ID DWORD 2 : 2331DE30
ID DWORD 3 : 7AC1D99F
ID DWORD 4 : F2519EED
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 47 9C 6D DE 39 42 E1 2C 42 9C 1D 6A DE D8 03 71
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 4B9B7510
CRC 1 : 3E691FF8
Checksum C4
SearchForBootstrap_DCT5..
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAPIDOv11_2nd.fg
Boot File - Version 010.050.00
Boot File - Revision 0x0002 (2)
eBB5ProtocolType == New
PrepareBootstrapFile_DCT5 replaced "SILO" with "2ND\0"
PrepareBootstrapFile_DCT5 replaced "BOOT_MEDIAX" with "BOOT_MEDIA0"
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
Secondary Loader Sent...
TransmissionTypeRequest_DCT5_NewProtocol
TRANSMISSION_TYPE_REQUEST_BB5 GET_PROTOCOLS_BB5
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 3E 00 C0
TransmissionTypeRequest_DCT5_NewProtocol
FPIF_TRANSMISSION_MODE_LIST_BB5 using default mode 04 DDRand2TX
TRANSMISSION_TYPE_REQUEST_BB5 : 59 02 41 02 04 00 36 03 00 00 61 1C
Transmission Type Request Sent...
ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
MCU_CONFIGURATION_RESPONSE_BB5:
MessageID : 06
SubBlocks : 06
1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : RAM 05
Device Index : 00
Manufacturer Code : 0000 -> Flash
Device ID : 0000 -> not detected
Extended/Fixed ID : 0000
Revision ID : 0000
2 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MMC 04
Device Index : 00
Manufacturer Code : FFFF -> Flash
Device ID : 0000 -> BAD FLASH TYPE
Extended/Fixed ID : 0000
Revision ID : 0000
3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Manufacturer Code : 0400 -> Flash
Device ID : 0000 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 0000
4 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 01
Manufacturer Code : 0000 -> SPANSION
Device ID : 0001 -> not used
Extended/Fixed ID : 0000
Revision ID : 0000
5 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MuxOneNAND 03
Device Index : 00
Manufacturer Code : 00EC ->
Device ID : 0058 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 0121
6 Sub Block ID : 35 NAND_DRIVER_VERSION_BB5
Block Length : 09
BB ASIC Index : CMT 00
Data : XSR 1.6
Checksum : 0C
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
FLS1SendAlgoCodeEx..
SendAlgoCode_DCT5..
SearchForAlgorithm_DCT5..
Looking for ALL Devices...
Searching Algorithm Files MuxOneNAND (03) ManID :00EC DevID :0058 ExtID :0000 RevID :0121
Flash De******or
Manufacturer Code : 00EC
Device ID : 0058
Extended/Fixed ID : 0000
Revision ID : 0000
Size : 20000000 (512 MB)
VPP Info : 0000
Erase10s : 1E
Block1s : 32
BErase1s : 02
Reserved0 : 00
Reserved1 : 00
Reserved2 : 00
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAPIDOv11_XSR17_alg.fg
Algorithm File - Version 010.050.00
Algorithm File - Revision 0x0002 (2)
eBB5ProtocolType == New
Algo Loader Sent...
SendCodeStart_NewProtocol :
SendCodeStart_NewProtocol_DCT5 : No Error - 0 (0x00)
TransmissionTypeRequest_DCT5_NewProtocol
TRANSMISSION_TYPE_REQUEST_BB5 GET_PROTOCOLS_BB5
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 3E 00 C0
TransmissionTypeRequest_DCT5_NewProtocol
FPIF_TRANSMISSION_MODE_LIST_BB5 using default mode 04 DDRand2TX
TRANSMISSION_TYPE_REQUEST_BB5 : 59 02 41 02 04 00 36 03 00 00 61 1C
SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)
FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)
FUR control Ok...
VPP Enabled by Software
Using Internal VPP
VPP Enabled by Software
FLASH_VOLTAGE_INIT_BB5 : 5C 01 26 04 00 00 00 00 D4
Pabub KEY Request
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
PAPUB_KEYS_HASH_RESP_BB5 2A
BB Asic Index : 00
CMT PAPUBKEYS HASH:
E00DA77BF32983F864BC7671FE7709A29D8E2C08
Scanning Simlock Applet Type...
OK
=================================================
PA_SIMLOC30 Applet detected
Use "Scan Phone" Button to Check if this Phone
uses a 15-digit NCK or a 20-digit NCK...
=================================================
* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!
* Simlocks are in PM 120 Only...
* PM 308 is Write Protected...
FlashInfo.RestartMode : 2
Waiting for Phone to Go Online...
Elapsed Time: 1s
Elapsed Time: 2s
Elapsed Time: 3s
Elapsed Time: 4s
Elapsed Time: 5s
Elapsed Time: 6s
Elapsed Time: 7s
Elapsed Time: 8s
Elapsed Time: 9s
Elapsed Time: 10s
ERROR : PHONE READ INFO FAILED
Use "BUSCHECK" Button to Force the Phone
into Local Mode... Then "SCANPHONE" after.
For N95, N95-8GB and E90 Phones, you need a
Test Mode Adapter to provide some Extra Power
so that the Phone will go into Local Mode...
ياريت الرد في اقرب وقت
رد مع اقتباس
.gif)
المفضلات