- غير متواجد
RIFF JTAG - CDMA Haier C300 Repair supported, JTAG Manager v1.32 released
21.04.2011 CDMA Haier C300 Repair supported
Resurrecting Haier C300 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
To resurrect Haier C300:
21.04.2011 JTAG Manager 1.32 released
- Solder JTAG cable to Haier C300 JTAG pads;
- Insert USB Data cable into board and PC;
- Make sure Haier C300 is selected in the list of models;
- Click Resurrect button;
- Choose which areas to flash;
- Wait till software signals a successful operation completion;
- De-solder JTAG wires;
This is most usefull for NOR-based devices since sometimes such devices require different firmware for different NOR memory chip IDs. Thus resurrector DLLs will be able to perform automatic selection of resurrection data.
- Resurrector DLLs can now request current Memory Chip IDs
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
RIFF Box – JTAG Revolution
22-04-2011 12:58 PM