قائمة الاعضاء المشار اليهم
النتائج 1 إلى 10 من 10

الموضوع: 6120c شاشة بيضاء

  1. #1
    .: جيماوي فعال :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2007
    المشاركات
    224
    الشكر
    1
    شُكر 56 فى 43 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    21

    افتراضي 6120c شاشة بيضاء

    السلام عليكم

    جاني نوكيا 6120c شاشة بيضاء

    في كل مرة اصلحو اما فول فلاش او فايل البلانك او فايل اينو

    Box VPP disabled
    All box selftests passed!
    Super DCT4 Activation: TRUE
    Initializing FBUS...
    All initialized - Ready to work
    Processing pre flash tasks...
    Backing up RPL...
    RPL Creation started...
    Processing CMT Part...
    Warning: Phone not detected, using Rap Public ID in FileName and reading Certificates Only
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 05100117F08C0052E30B5B99E6D96A5BE3EB07D5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.48.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0xFFFFFFFF00000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC003000000321, Samsung, ONENAND
    Requested Algorithm: XSR 1.5 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
    RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.10.48.1, Algo: XSR 1.5
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    Warning: PAPUBKEYS Hash Missing!
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    CMT NPC Not Found
    CMT CCC Not Found
    CMT HWC Not Found
    CMT VARIANT Not Found
    Restarting MCU...
    RPL Saved OK
    RPL backup thread finished, continuing...
    Backing up simlock...
    Simlock backup problem -> Phone not detected
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Processing rm243_07.20_prd_core.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 05100117F08C0052E30B5B99E6D96A5BE3EB07D5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    rm243_07.20_prd_core.fpsx, Type: Flash Image, Algo: BB5, XSR 1.5
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.48.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0xFFFFFFFF00000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC003000000321, Samsung, ONENAND
    Requested Algorithm: XSR 1.5 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
    RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.10.48.1, Algo: XSR 1.5
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    Warning: PAPUBKEYS Hash Missing!
    Flashbus Write baud set to 5.0Mbits
    Sending Certificates...
    Certificates OK
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x00040000-0x00082FFF, ONENAND
    EraseArea[0,CMT]: 0x00083400-0x0087FFFF, ONENAND
    EraseArea[0,CMT]: 0x00B80000-0x04DFFFFF, ONENAND
    Erase Partition (CMT)
    Waiting 320s for erasure finish...
    Erase taken 0.516s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT ADA Certificate...
    Writing CMT KEYS Certificate...
    Writing CMT PRIMAPP Certificate...
    Writing CMT RAP3NAND Certificate...
    Writing CMT PASUBTOC Certificate...
    WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
    Writing CMT PAPUBKEYS Certificate...
    Writing CMT SOS*UPDAPP Certificate...
    Writing CMT SOS*DSP0 Certificate...
    Writing CMT SOS*ISASW Certificate...
    Writing CMT SOS*CORE Certificate...
    Writing CMT SOS+ROFS Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 48.812s
    Flashing Speed: 7498.77 kBit/S
    Restarting MCU...
    Processing rm243_07.20_prd_core.fpsx (APE)...
    Processing rm243_07.20_prd_vB20_01_mea_a.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 05100117F08C0052E30B5B99E6D96A5BE3EB07D5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    rm243_07.20_prd_vB20_01_mea_a.fpsx, Type: Flash Image, Algo: BB5, XSR 1.5
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.48.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC003000000321, Samsung, ONENAND
    Requested Algorithm: XSR 1.5 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
    RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.10.48.1, Algo: XSR 1.5
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 0FE1BA92D924A658E4800780FA6F4868100AC947
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x03300000-0x04DFFFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.187s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT SOS+ROFX Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 21.671s
    Flashing Speed: 7138.98 kBit/S
    Restarting MCU...
    Processing rm243_07.20_prd_vB20_01_mea_a.fpsx (APE)...
    Processing rm243_07.20_prd_UDA_Pearl_White.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 05100117F08C0052E30B5B99E6D96A5BE3EB07D5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    Processing Flash Image Failed -> Given image file is not suitable for this CMT System ASIC ID (Tick "Skip CMT ID Check" if you are sure that given Image File is suitable for this phone!).
    Failed to Process all Image files -> Failed to process rm243_07.20_prd_UDA_Pearl_White.fpsx




  2. # ADS
    Circuit advertisement
    تاريخ التسجيل
    Always
    المشاركات
    Many
  • # ADS

    تاريخ التسجيل
    Always
    المشاركات
    Many


  • #2
    .: جيماوي محترف :.
    الصورة الرمزية المدينة المنورة

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jun 2007
    الدولة
    العراق - بغداد
    العمر
    27
    Phone
    6700C
    المشاركات
    3,143
    الشكر
    5,010
    شُكر 2,919 فى 1,408 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    66

    افتراضي رد: 6120c شاشة بيضاء

    اخي ارفع انفو او جيك التورنادو

  • #3
    .: جيماوي فعال :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2007
    المشاركات
    224
    الشكر
    1
    شُكر 56 فى 43 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    21

    افتراضي رد: 6120c شاشة بيضاء

    جك التورنادو

    1ST BOOT : C0,07 [Rm-243] [2.1.0.1]
    RAPx ID : 000000010000022600010006400C192101031103
    EM 1 ID : 00000296
    EM 2 ID : 00000B22
    RAPx PBID : 05100117F08C0052E30B5B99E6D96A5BE3EB07D5
    RAPx MODE : 00
    RAPx HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
    RAPx ROID : 4B9B75103E691FF8
    CMT 1ST Boot OK
    CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 1.37.1
    CMT FLID0 : 00EC0030-00400321, Sam OneNAND-1G
    CMT FLCNT : 00030000000000000000000000000000000000
    CMT MCID0 : FFFF0000-00000000
    CMT 2ND Boot OK
    CMT ALGO : RAPIDOv11_algo.fg, Ver: 1.40.0
    00000000: 02 00 00 00 00 F1 72 ......r
    ERR: CMT ALG Boot CERT MISM
    Rebooting Mobile

  • #4
    .: جيماوي محترف :.
    الصورة الرمزية المدينة المنورة

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jun 2007
    الدولة
    العراق - بغداد
    العمر
    27
    Phone
    6700C
    المشاركات
    3,143
    الشكر
    5,010
    شُكر 2,919 فى 1,408 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    66

    افتراضي رد: 6120c شاشة بيضاء

    اخي فلش الجهاز عن طريق ال USB البوت مش كامل

  • #5
    .: جيماوي محترف :.
    الصورة الرمزية m.nasser

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jun 2010
    Phone
    5800
    المشاركات
    3,868
    الشكر
    501
    شُكر 1,538 فى 1,110 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    55

    افتراضي رد: 6120c شاشة بيضاء

    اقتباس المشاركة الأصلية كتبت بواسطة سفيان سفيان مشاهدة المشاركة
    جك التورنادو

    1ST BOOT : C0,07 [Rm-243] [2.1.0.1]
    RAPx ID : 000000010000022600010006400C192101031103
    EM 1 ID : 00000296
    EM 2 ID : 00000B22
    RAPx PBID : 05100117F08C0052E30B5B99E6D96A5BE3EB07D5
    RAPx MODE : 00
    RAPx HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
    RAPx ROID : 4B9B75103E691FF8
    CMT 1ST Boot OK
    CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 1.37.1
    CMT FLID0 : 00EC0030-00400321, Sam OneNAND-1G
    CMT FLCNT : 00030000000000000000000000000000000000
    CMT MCID0 : FFFF0000-00000000
    CMT 2ND Boot OK
    CMT ALGO : RAPIDOv11_algo.fg, Ver: 1.40.0
    00000000: 02 00 00 00 00 F1 72 ......r
    ERR: CMT ALG Boot CERT MISM
    Rebooting Mobile
    تأكد من الوصلة المستخدمة واعد رفع التشك
    عندك مشكلة في المعالج
    يرجى التاكد من الوصلة

  • #6
    .: جيماوي فعال :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2007
    المشاركات
    224
    الشكر
    1
    شُكر 56 فى 43 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    21

    افتراضي رد: 6120c شاشة بيضاء

    اشكرك على الرد ارجو انت تبقى معي بدون امر عليك

  • #7
    .: جيماوي فعال :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2007
    المشاركات
    224
    الشكر
    1
    شُكر 56 فى 43 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    21

    افتراضي رد: 6120c شاشة بيضاء

    Sending User Abort Signal...
    Phone not detected at USB -> User Abort
    Warning: Phone not detected, using Rap Public ID in FileName and reading Certificates Only
    Booting CMT...
    [Nokia USB Flashing Generic]: Port opened OK!
    Old ROM Detected
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 05100117F08C0052E30B5B99E6D96A5BE3EB07D5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.48.1, Algo: BB5
    Using NEW BB5 FLASHING PROTOCOL
    Waiting for USB Boot ROM Answer...
    Prepare phone failed with message ->
    The ROM Refused to start Secondary Loader. Common Reasons:
    1. Battery voltage is too low.
    2. Transmission error occured. Usually happens when You put battery on while USB cable plugged. Try unplug USB cable, re-insert battery, plug USB Cable.
    3. Check USB cable quality, connect to USB 2.0 Port
    4. It may be also phone hardware problem
    5. Also, loader may be corrupted, or current BootROM don't support it (affected are RAP3Gv3 and RAPIDO phones)
    Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
    RPL backup thread finished, continuing...
    Backing up simlock...
    Sending User Abort Signal...
    Phone not detected at USB -> User Abort
    Simlock backup problem -> Phone not detected
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Processing rm243_07.20_prd_core.fpsx (CMT)...
    Booting CMT...
    [Nokia USB Flashing Generic]: Port opened OK!
    Failed to Boot CMT -> Failed to get First Boot Block
    Processing Flash Image Failed -> Failed to Boot CMT
    Failed to Process all Image files -> Failed to process rm243_07.20_prd_core.fpsx

  • #8
    .: جيماوي محترف :.
    الصورة الرمزية المدينة المنورة

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jun 2007
    الدولة
    العراق - بغداد
    العمر
    27
    Phone
    6700C
    المشاركات
    3,143
    الشكر
    5,010
    شُكر 2,919 فى 1,408 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    66

    افتراضي رد: 6120c شاشة بيضاء

    انا باقي معك

  • #9
    .: جيماوي فعال :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2007
    المشاركات
    224
    الشكر
    1
    شُكر 56 فى 43 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    21

    افتراضي رد: 6120c شاشة بيضاء

    Sending User Abort Signal...
    Phone not detected at USB -> User Abort
    Warning: Phone not detected, using Rap Public ID in FileName and reading Certificates Only
    Booting CMT...
    [Nokia USB Flashing Generic]: Port opened OK!
    Old ROM Detected
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 05100117F08C0052E30B5B99E6D96A5BE3EB07D5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.48.1, Algo: BB5
    Using NEW BB5 FLASHING PROTOCOL
    Waiting for USB Boot ROM Answer...
    Prepare phone failed with message ->
    The ROM Refused to start Secondary Loader. Common Reasons:
    1. Battery voltage is too low.
    2. Transmission error occured. Usually happens when You put battery on while USB cable plugged. Try unplug USB cable, re-insert battery, plug USB Cable.
    3. Check USB cable quality, connect to USB 2.0 Port
    4. It may be also phone hardware problem
    5. Also, loader may be corrupted, or current BootROM don't support it (affected are RAP3Gv3 and RAPIDO phones)
    Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
    RPL backup thread finished, continuing...
    Backing up simlock...
    Sending User Abort Signal...
    Phone not detected at USB -> User Abort
    Simlock backup problem -> Phone not detected
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Processing rm243_07.20_prd_core.fpsx (CMT)...
    Booting CMT...
    [Nokia USB Flashing Generic]: Port opened OK!
    Failed to Boot CMT -> Failed to get First Boot Block
    Processing Flash Image Failed -> Failed to Boot CMT
    Failed to Process all Image files -> Failed to process rm243_07.20_prd_core.fpsx

  • #10
    .: جيماوي محترف :.
    الصورة الرمزية m.nasser

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jun 2010
    Phone
    5800
    المشاركات
    3,868
    الشكر
    501
    شُكر 1,538 فى 1,110 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    55

    افتراضي رد: 6120c شاشة بيضاء

    ممكن ترفع على التورنادو عشان اوضح

  • الكلمات الدلالية لهذا الموضوع

    المفضلات

    المفضلات

    ضوابط المشاركة

    • لا تستطيع إضافة مواضيع جديدة
    • لا تستطيع الرد على المواضيع
    • لا تستطيع إرفاق ملفات
    • لا تستطيع تعديل مشاركاتك
    •