قائمة الاعضاء المشار اليهم
النتائج 1 إلى 10 من 10

الموضوع: جميع اكواد الاجهزه الصيني

  1. #1
    عضو موقوف

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2007
    الدولة
    Sudan
    المشاركات
    137
    الشكر
    0
    شُكر 13 فى 10 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    افتراضي جميع اكواد الاجهزه الصيني

    ALL CHINA MOBILES CODE

    ALL CHINA MOBILES CODE

    *#66*# Set Factory Mode CONFIRMED
    *#8375# Show Software Version CONFIRMED
    *#1234# A2DP ACP Mode CONFIRMED
    *#1234# A2DP INT Mode CONFIRMED
    *#0000# + Send : Set Default ******** CONFIRMED
    *#0007# + Send : Set ******** to Russian CONFIRMED
    *#0033# + Send : Set ******** to French CONFIRMED
    *#0034# + Send : Set ******** to Spanish CONFIRMED
    *#0039# + Send : Set ******** to Italian CONFIRMED
    *#0044# + Send : Set ******** to English CONFIRMED
    *#0049# + Send : Set ******** to German CONFIRMED
    *#0066# + Send : Set ******** to Thai CONFIRMED
    *#0084# + Send : Set ******** to Vietnamese CONFIRMED
    *#0966# + Send : Set ******** to Arabic CONFIRMED
    CHINESE MODELS:
    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#
    set default ********: *#0000# Send
    set English ********: *#0044# Send
    set English ******** (new firmware): *#001# Send also
    ==========
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set ******** to English: *#0044#
    Set ******** to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default ********: *#0000# Send
    C926 set English ********: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set ******** to English: *#0044#
    Set ******** to Russian: *#0007#
    Service codes Motorola:
    Motofone F3 software version: **9999* Send
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    ZTE Mobile:>1- *938*737381#
    2- PHONE WILL DIPLAYED DONE
    3- POWER OFF YOUR PHONE AND POWER ON AGAIN
    alcatel:>E205
    unlocking phone code,only press***847# without simcard
    E900 software version: *#5002*8376263#
    E900 full reset: *2767*3855#
    Service codes Spice:
    S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
    S410 engineer mode: *#3646633#
    S900 software version: *#8375#
    S900 serial no: *#33778#
    Service codes Philips:
    S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
    Service codes "Chinese" models:
    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes VK-Mobile 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    service menu: *#85*364# (hold #)
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    KG300 NVRAM format: 2945#*# -> menu 15
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    M100 software version: ####0000#
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set ******** to English: *#0044#
    Set ******** to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default ********: *#0000# Send
    C926 set English ********: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set ******** to English: *#0044#
    Set ******** to Russian: *#0007#
    Service codes Motofone-F3:
    Motofone F3 software version: **9999* Send
    ***300* Set SIM Pin
    ***310* / ***311* SIM Pin ON | OFF
    ***000* Reset Factory settings
    ***644* Set Voicemail number
    ***260* / ***261* Auto keypad lock ON | OFF
    ***510* / ***511* Voice Prompts ON | OFF
    ***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
    ***200608* Send: software version
    ***200606* Send: software version
    ***200806* Send: flex version
    ***250* / ***251* Keypad tones ON | OFF
    ***470* Select time format
    ***500* /***501* Prepaid Balance Display ON | OFF
    ***520* Change ********
    Service codes Motorola:
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    and "yes"''
    chiniss cord & pin out
    some chinese Mobile Code And Pinouts ::::::::::::>>>>>>>>>>
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set ******** to English: *#0044#
    Set ******** to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default ********: *#0000# Send
    C926 set English ********: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set ******** to English: *#0044#
    Set ******** to Russian: *#0007#
    Service codes Motorola:
    Motofone F3 software version: **9999* Send
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    ZTE Mobile:>1- *938*737381#
    2- PHONE WILL DIPLAYED DONE
    3- POWER OFF YOUR PHONE AND POWER ON AGAIN
    alcatel:>E205
    unlocking phone code,only press***847# without simcard
    E900 software version: *#5002*8376263#
    E900 full reset: *2767*3855#
    Service codes Spice:
    S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
    S410 engineer mode: *#3646633#
    S900 software version: *#8375#
    S900 serial no: *#33778#
    Service codes Philips:
    S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
    Service codes "Chinese" models:
    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes VK-Mobile 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    service menu: *#85*364# (hold #)
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    KG300 NVRAM format: 2945#*# -> menu 15
    Service codes Sony-Ericsson:
    J100 software version: #82#
    [quote] [Report] [Reply]
    [Adv.] China Phones Flash Box

    crack3war
    Ordinary Members


    UID 635
    Digest Posts 0
    Credits 100
    Posts 5
    Money 489
    Reading Access 10
    Registered 24-10-2007
    Status Offline #2Post at 25-12-2007 21:54 Profile | P.M.
    Service codes Fly:
    M100 software version: ####0000#
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set ******** to English: *#0044#
    Set ******** to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default ********: *#0000# Send
    C926 set English ********: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set ******** to English: *#0044#
    Set ******** to Russian: *#0007#
    Service codes Motofone-F3:
    Motofone F3 software version: **9999* Send
    ***300* Set SIM Pin
    ***310* / ***311* SIM Pin ON | OFF
    ***000* Reset Factory settings
    ***644* Set Voicemail number
    ***260* / ***261* Auto keypad lock ON | OFF
    ***510* / ***511* Voice Prompts ON | OFF
    ***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
    ***200608* Send: software version
    ***200606* Send: software version
    ***200806* Send: flex version
    ***250* / ***251* Keypad tones ON | OFF
    ***470* Select time format
    ***500* /***501* Prepaid Balance Display ON | OFF
    ***520* Change ********
    Service codes Motorola:
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    and "yes"''
    .................................................. ...............................
    N95Pda and N95S Pinout
    2x5
    4:Rx
    5:TX
    6:GND
    .................................................. ...............................
    K1 Moto Pinout
    4:Rx
    5:Tx
    6:Gnd
    .................................................. ...............................
    PDA ZT6618
    1........8 pin mini Conector
    3:Rx
    4:TX
    5:Gnd
    .................................................. ...............................
    Cect 8380
    1..........8 pin mini Conector
    1:Gnd
    2:Rx
    3:Tx
    .................................................. ...............................
    KG-200
    4:Gnd
    3:Tx
    2:Rx
    .................................................. ...............................
    N91I
    1..............12 pin Connector
    .
    5:Gnd . 12:Tx
    6:Tx . 13:Rx
    7:Rx .
    ==============================================
    All Chinese Mobile Code And Pinouts
    --------------------------------------------------------------------------------
    hi
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set ******** to English: *#0044#
    Set ******** to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default ********: *#0000# Send
    C926 set English ********: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set ******** to English: *#0044#
    Set ******** to Russian: *#0007#
    Service codes Motorola:
    Motofone F3 software version: **9999* Send
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    ZTE Mobile:>1- *938*737381#
    2- PHONE WILL DIPLAYED DONE
    3- POWER OFF YOUR PHONE AND POWER ON AGAIN
    alcatel:>E205
    unlocking phone code,only press***847# without simcard
    E900 software version: *#5002*8376263#
    E900 full reset: *2767*3855#
    Service codes Spice:
    S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
    S410 engineer mode: *#3646633#
    S900 software version: *#8375#
    S900 serial no: *#33778#
    Service codes Philips:
    S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
    Service codes "Chinese" models:
    default user code: 1122, 3344, 1234, 5678
    Engineer mode: *#110*01#
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    LCD contrast: *#369#
    software version: *#800#
    software version: *#900#
    Service codes BenQ:
    software version: *#300#
    test mode: *#302*20040615#
    Service codes Pantech:
    software version: *01763*79837#
    service menu: *01763*476#
    reset defaults (phone/user code reset to default): *01763*737381#
    Service codes VK-Mobile 3xx, 5xx:
    software version: *#79#
    software version: *#837#
    service menu: *#85*364# (hold #)
    Service codes VK200, VK2000, VK2010, VK2020, VK4000:
    software version: *#79#
    service menu: *#9998*8336# (hold #)
    reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
    Service codes LG:
    software version: 2945#*#
    KG300 NVRAM format: 2945#*# -> menu 15
    Service codes Sony-Ericsson:
    J100 software version: #82#
    Service codes Fly:
    M100 software version: ####0000#
    2040(i) reset defaults: *#987*99# Send
    MX200 reset defaults: *#987*99# Send
    MX200 software version: *#900# Send
    SL300m reset defaults: *#987*99# Send
    SL300m software version: *#900# Send
    SL500m reset defaults: *#987*99# Send
    SL500m software version: *#900# Send
    MP500 reset defaults: *#987*99# Send
    MP500 software version: *#900# Send
    Set ******** to English: *#0044#
    Set ******** to Russian: *#0007#
    Service codes Konka:
    C926 software version: *320# Send
    C926 set default ********: *#0000# Send
    C926 set English ********: *#0044# Send
    Service codes GStar:
    GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
    Set ******** to English: *#0044#
    Set ******** to Russian: *#0007#
    Service codes Motofone-F3:
    Motofone F3 software version: **9999* Send
    ***300* Set SIM Pin
    ***310* / ***311* SIM Pin ON | OFF
    ***000* Reset Factory settings
    ***644* Set Voicemail number
    ***260* / ***261* Auto keypad lock ON | OFF
    ***510* / ***511* Voice Prompts ON | OFF
    ***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
    ***200608* Send: software version
    ***200606* Send: software version
    ***200806* Send: flex version
    ***250* / ***251* Keypad tones ON | OFF
    ***470* Select time format
    ***500* /***501* Prepaid Balance Display ON | OFF
    ***520* Change ********
    Service codes Motorola:
    C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
    C138, C139, C140 software version: #02#*
    C155, C156, C157 software version: #02#*
    C257, C261 software version: #02#*
    V171, V172, V173 software version: #02#*
    V175, V176, V176 software version: #02#*
    C168, W220 software version: *#**837#
    W208, W375 software version: #02#*
    and "yes"''
    .................................................. ...............................
    N95Pda and N95S Pinout
    2x5
    4:Rx
    5:TX
    6:GND
    .................................................. ...............................
    K1 Moto Pinout
    4:Rx
    5:Tx
    6:Gnd
    .................................................. ...............................
    PDA ZT6618
    1........8 pin mini Conector
    3:Rx
    4:TX
    5:Gnd
    .................................................. ...............................
    Cect 8380
    1..........8 pin mini Conector
    1:Gnd
    2:Rx
    3:Tx
    .................................................. ...............................
    KG-200
    4:Gnd
    3:Tx
    2:Rx
    .................................................. ...............................
    N91I
    1..............12 pin Connector
    .
    5:Gnd . 12:Tx
    6:Tx . 13:Rx
    7:Rx




  2. # ADS
    Circuit advertisement
    تاريخ التسجيل
    Always
    الدولة
    Advertising world
    المشاركات
    Many
  • # ADS

    تاريخ التسجيل
    Always
    الدولة
    Advertising world
    المشاركات
    Many


  • #2
    من مؤسسين المنتدى والسبورت
    الصورة الرمزية NasirNS

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2007
    الدولة
    Sudan
    العمر
    48
    Sonork
    158.1358
    Phone
    Nokia 6630
    المشاركات
    9,913
    الشكر
    14,795
    شُكر 12,048 فى 2,189 مشاركة
    تم تذكيره فى
    1 مشاركة
    تمت الاشارة اليه فى
    24 مواضيع
    معدل تقييم المستوى
    362

    افتراضي

    الله يديك العافية محمد بجد ابهرتنى وبجد موضوع مميز ان شاءالله نشوف منك دائما التميز
    (سبحان الله وبحمده .. سبحان الله العظيم)
    قال الله تعالى : {مَا يَلْفِظُ مِن قَوْلٍ إِلَّا لَدَيْهِ رَقِيبٌ عَتِيدٌ}
    اعتزر للجميع عن قلة متابعتى وذلك بسبب انشغالى بتطوير السبورت
    منتدى عربي سبورت عربي جيم فلاش / هوستينج العرب

  • #3
    .: جيماوي متالق :.
    الصورة الرمزية mor71

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2007
    الدولة
    Aleppo, Syria
    العمر
    45
    Phone
    متغير
    المشاركات
    1,339
    الشكر
    3,416
    شُكر 1,342 فى 690 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    44

    افتراضي

    مشكور حبيبي على الموضوع الشامل تسلم ايدك وبارك الله فيك

  • #4
    .: جيماوي جديد :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2008
    المشاركات
    1
    الشكر
    0
    شُكر 0 فى 0 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    افتراضي

    تسلم اخوي ودائما للافضل

  • #5
    .: جيماوي جديد :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Aug 2008
    المشاركات
    34
    الشكر
    0
    شُكر 2 فى 2 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    17

    افتراضي

    مشكورررررررررررررررررررررررررررررررررررررررررررر

  • #6
    صديق المنتدى
    الصورة الرمزية mafea55

    الحالة
    غير متواجد
    تاريخ التسجيل
    Mar 2008
    الدولة
    فلسطين-رام الله دوار المنارة
    العمر
    29
    Phone
    TWINS PHONE
    المشاركات
    1,504
    الشكر
    3
    شُكر 864 فى 438 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    35

    افتراضي

    مشكوووووووووووووووووووووووووور

  • #7
    .: جيماوي رائع :.
    الصورة الرمزية fahed76

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2007
    المشاركات
    577
    الشكر
    64
    شُكر 213 فى 130 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    24

    افتراضي

    الف شكرررررررررررررررررررررررررررررررر

  • #8
    .: جيماوي مشارك :.
    الصورة الرمزية masony

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2007
    Phone
    5800
    المشاركات
    87
    الشكر
    0
    شُكر 28 فى 17 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    20

    افتراضي

    الف شكرررررررررررررررررررررررررررررررر

  • #9
    .: جيماوي فعال :.
    الصورة الرمزية sameribrahem

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2007
    المشاركات
    262
    الشكر
    3
    شُكر 50 فى 34 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    21

    افتراضي

    مجهود رائع وبالتوفيق

  • #10
    .: جيماوي جديد :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Sep 2008
    المشاركات
    2
    الشكر
    0
    شُكر 0 فى 0 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    افتراضي

    تسلم ايديك على الموضوع الرائع وفي انتظار المزييييييييد!

  • الكلمات الدلالية لهذا الموضوع

    المفضلات

    المفضلات

    ضوابط المشاركة

    • لا تستطيع إضافة مواضيع جديدة
    • لا تستطيع الرد على المواضيع
    • لا تستطيع إرفاق ملفات
    • لا تستطيع تعديل مشاركاتك
    •