.: جيماوي متالق :.
- غير متواجد
RIFF JTAG - Huawei E153U Broadband modem unbrick – dead boot repair supported
17.03.2011 Huawei E153U Broadband modem unbrick – dead boot repair supported
Resurrecting Huawei E153U is simple. Just make sure you solder all JTAG signals and insert modem into a USB port for it to get powered.
If modem is not detected by RIFFBOX JTAG, disconnect JTAG connector, re-insert modem into USB and then connect back the JTAG connector.
There are secured (QCSBL is signed) and non-secured (QCSBL is not signed) modem revisions exist. Resurrector will automatically detect board revision and will select proper data to be flashed.
No matter what h/w revision is you can select which partitions are to be flashed during resurrection process.
To resurrect Huawei E153U:
- Solder JTAG cable to Huawei E153U JTAG pads;
- Insert Huawei E153U modem into any USB port for power;
- Make sure Huawei E153U is selected in the list of models;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- De-solder JTAG wires;
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
RIFF Box – JTAG Revolution
17-03-2011 01:54 PM