قائمة الاعضاء المشار اليهم
النتائج 1 إلى 5 من 5

الموضوع: Cyclone Box v1.57 1st in world ORIGINAL RPL BACKUP and SD BACKUP for RAPU/RAP4/RAPID

  1. #1
    صديق المنتدى
    الصورة الرمزية gsm.magic

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jan 2009
    الدولة
    المــــغرب
    Sonork
    100.1592533
    Phone
    غير قار
    المشاركات
    4,112
    الشكر
    10,458
    شُكر 14,123 فى 2,862 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    513

    Cool Cyclone Box v1.57 1st in world ORIGINAL RPL BACKUP and SD BACKUP for RAPU/RAP4/RAPID

    Hi, new firmware for Cyclonebox is Avaiable.

    - Added PM308 decryption for NEW phones (RAPU , RAP3Gv4, RAPIDO New ), that means you can:
    - Superdongle Key backup
    - CMLA Key backup
    - Correct Phone Security Analysis for this phones
    - Correct MCU/DSP timestamps analysis
    - Phone auhtorization without corrupting SD key, when SD key is correct
    - Created RPL from RAPU/RAP4 phones are now 100% like delivered from Nokia! That means after full erase and writing back backed-up RPL, your phone STILL MIGHT BE AUTHORIZED WITH ORIGINAL SX4 CARD - no security issues !
    - Created RPL from RAPU phones might also SAVE PHONE from DESTROYING by some other tools (Contact Service after upgrade to latest versions...)
    - Minor changes and bugfixes

    This is firmware-side update only, upgrade your box firmware to v1.57 and use latest installer v1.12


    Created RPL with FULL NOKIA CONTENT (SD, CMLA, ...)

    RPL Creation started...
    Processing CMT Part...
    Storing Product Code...
    Storing PSN...
    Storing HWID...
    Trying to store Simlock...
    Reading Configuration Key...
    Hashing...
    Reading SHA1-RSA Signature...
    Reading SHA1-HMAC Signature...
    Storing Simlock...
    Trying to store WMDRM RPL...
    Reading Keys...
    Storing WMDRM PD...
    Reading Security Block...
    Security block OK and saved to "RM-469_355216039314532_2011-03-10_130535.SecurityBlock.PM"
    "1BB0020A296303443292389F545846C201100A5C.C0003160 " Exists, That is good...
    Storing Additional Data...
    Checking Superdongle Key...
    Encrypting Superdongle Key...
    Storing Superdongle Key...
    Checking CMLA Key...
    Storing CMLA Key...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
    CMT_EM_ASIC_ID: 00001040
    CMT_EM_ASIC_ID: 00001030
    CMT_PUBLIC_ID: 1BB0020A296303443292389F545846C201100A5C
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
    CMT_BOOT_ROM_CRC: 3E273BF6
    CMT_SECURE_ROM_CRC: 37BE26FA
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.48.1, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 85F252E351E225CAFC4DFBC8041EABD2823E3500
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    Storing NPC...
    Storing CCC...
    Storing HWC...
    CMT VARIANT Not Found
    Restarting MCU...
    RPL Saved OK
    Example seccurity analysis, timestamp analysis, etc for RAPU

    Started Reading MCU & DSP Timestamps...
    MCU Version V ICPR82_09w46.8
    MCU Date 30-03-10
    Product RM-469 (Nokia E52)
    Manufacturer (c) Nokia
    IMEI 355216039314532
    Mastercode 2637612627
    Reading Security Block...
    Security block OK and saved to "RM-469_355216039314532_2011-03-10_130314.SecurityBlock.PM"
    "1BB0020A296303443292389F545846C201100A5C.C0003160 " Exists, That is good...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
    CMT_EM_ASIC_ID: 00001040
    CMT_EM_ASIC_ID: 00001030
    CMT_PUBLIC_ID: 1BB0020A296303443292389F545846C201100A5C
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
    CMT_BOOT_ROM_CRC: 3E273BF6
    CMT_SECURE_ROM_CRC: 37BE26FA
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.48.1, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 85F252E351E225CAFC4DFBC8041EABD2823E3500
    APE Boot skipped on user request
    Flashbus Write baud set to 5.0Mbits
    Reading MCUSW...
    Reading DSP0...
    Restarting MCU...
    ------ SECURITY BLOCK TIMESTAMPS ------
    Timestamp Slots Detected: 4
    Timestamp[1] "AENO", 2010-02-19 11:11:38
    Timestamp[1] Hash "0BCD489612D4A4968B4D42A5631FC85C5D7E0E81"
    Timestamp[1] Factory MCUSW Timestamp 1970-01-01 02:00:00
    Timestamp[1] Dejan Hack Detected
    Timestamp[1] ValidAfter Factory MCUSW Test Passed OK!
    Timestamp[2] "CMCU", 2010-04-02 11:57:08
    Timestamp[2] Hash "4CC50641D7C45E9DFE2967D4802C8710547BF54A"
    Timestamp[2] Factory MCUSW Timestamp 2009-09-02 15:18:02
    Timestamp[2] ValidAfter Factory MCUSW Test Passed OK!
    Timestamp[3] "CDSP", 2010-04-02 11:57:07
    Timestamp[3] Hash "D8C94BFA607710D856D8C78A9CE3EB411CD7AC4C"
    Timestamp[3] Factory MCUSW Timestamp 2009-09-02 15:18:02
    Timestamp[3] ValidAfter Factory MCUSW Test Passed OK!
    Timestamp[4] "AMCU", 2010-04-02 11:57:09
    Timestamp[4] Hash "BFC854388C2C26014F05B5084A8033CB30E472EB"
    Timestamp[4] Factory MCUSW Timestamp 2009-09-02 15:18:02
    Timestamp[4] ValidAfter Factory MCUSW Test Passed OK!
    -------------------------------------
    ------ ACTUAL FLASH TIMESTAMPS ------
    MCUSW Timestamp 2010-04-02 11:57:08
    Flash MCUSW Timestamp synchronized with Security Block MCUSW Timestamp OK!
    DSP Timestamp 2010-04-02 11:57:07
    Flash DSP Timestamp synchronized with Security Block DSP Timestamp OK!
    -------------------------------------
    Finished, MCU and DSP Timestamps looks good!
    Started Phone Security Analysis...
    MCU Version V ICPR82_09w46.8
    MCU Date 30-03-10
    Product RM-469 (Nokia E52)
    Manufacturer (c) Nokia
    IMEI 355216039314532
    Mastercode 2637612627
    Reading Security Block...
    Security block OK and saved to "RM-469_355216039314532_2011-03-10_130516.SecurityBlock.PM"
    Step 1 : Testing SIMLOCK
    SIMLOCK SEFLTEST PASSED OK!
    Step 2 : Testing SECURITY
    SECURITY SEFLTEST PASSED OK!
    Step 3 : Analyzing Security Block
    "1BB0020A296303443292389F545846C201100A5C.C0003160 " Exists, That is good...
    Checking SUPERDONGLE...
    SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
    Checking SIMLOCK...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking MCU&DSP TIMESTAMPS...
    MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
    Checking CMLA KEYS...
    CMLA KEYS FOUND AND CHECKSUM OK! PASSED!
    Checking ECC KEYS...
    ECC KEYS FOUND AND CHECKSUM OK! PASSED!
    Checking DIV KEYS...
    DIV KEYS FOUND AND CHECKSUM OK! PASSED!
    Analyze finished!
    Best Regards,
    Cyclone Team



    GEM-FLASH
    [SIGPIC][/SIGPIC]
    Gsm.magic

  2. # ADS
    Circuit advertisement
    تاريخ التسجيل
    Always
    الدولة
    Advertising world
    المشاركات
    Many
  • # ADS

    تاريخ التسجيل
    Always
    الدولة
    Advertising world
    المشاركات
    Many


  • #2
    .: جيماوي رائع :.
    الصورة الرمزية melizi_2008

    الحالة
    غير متواجد
    تاريخ التسجيل
    Mar 2008
    المشاركات
    775
    الشكر
    415
    شُكر 294 فى 157 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    26

    افتراضي رد: Cyclone Box v1.57 1st in world ORIGINAL RPL BACKUP and SD BACKUP for RAPU/RAP4/RA


    • جزك الله خير اخى

      gsm.magic

      الافضل بوكس سكيلون
    • Best Regards,
      Cyclone Team


  • #3
    صديق المنتدى
    الصورة الرمزية khaledrepa

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2010
    الدولة
    الجزائر الغالية
    Sonork
    0000000000000
    Phone
    e1081
    المشاركات
    6,377
    الشكر
    13,208
    شُكر 15,208 فى 4,458 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    1 مواضيع
    معدل تقييم المستوى
    358

    افتراضي رد: Cyclone Box v1.57 1st in world ORIGINAL RPL BACKUP and SD BACKUP for RAPU/RAP4/RA

    بارك الله فيك

  • #4
    .:: Super Moderator ::.
    الصورة الرمزية MouAeD1989

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2007
    الدولة
    Syria - draa
    العمر
    27
    Phone
    G925F
    المشاركات
    9,414
    الشكر
    10,400
    شُكر 31,491 فى 5,293 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    71 مواضيع
    معدل تقييم المستوى
    591

    افتراضي رد: Cyclone Box v1.57 1st in world ORIGINAL RPL BACKUP and SD BACKUP for RAPU/RAP4/RA

    Cyclone Team

  • #5
    .: جيماوي رائع :.
    الصورة الرمزية Majeed-GSM

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jul 2009
    الدولة
    sudan
    Sonork
    0000000000000
    Phone
    iphone5
    المشاركات
    820
    الشكر
    1,510
    شُكر 663 فى 367 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    43

    افتراضي رد: Cyclone Box v1.57 1st in world ORIGINAL RPL BACKUP and SD BACKUP for RAPU/RAP4/RA

    مشكور يا باشا

  • الكلمات الدلالية لهذا الموضوع

    المفضلات

    المفضلات

    ضوابط المشاركة

    • لا تستطيع إضافة مواضيع جديدة
    • لا تستطيع الرد على المواضيع
    • لا تستطيع إرفاق ملفات
    • لا تستطيع تعديل مشاركاتك
    •