Boot...
Trying boot BB5 phone...
Failed to find RAP3 2nd loader
Phone Type: BB5
------------------- SYSTEM ID Response: 7 blocks -------------
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006400C19210
EM_ASIC_ID( RAP ):
00000295
EM_ASIC_ID( RAP ):
00000B22
PUBLIC_ID( RAP ):
20500104D77000521D94B5537EF0A24CBB0FA415
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM_ID( RAP ):
4B9B75103E691FF8
============= Set FBus mode for info =============
VBat is 3.99V
Vpp pin has 0.10V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone not powered
Phone not powered
Phone not powered
Phone not powered
FAILED to find USB Device.
Attach phone to usb port!
Switched to USB BUS
VPP is DISABLED.
Processing File: RM-348_32.001_prd.core.fpsx
Boot...
CONNECT PHONE to USB and Power ON phone!
Pooling for phone...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&3186cb3d&2&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Sending ULO code
Isa UPDAPP
RAP3NAND
PASUBTOC
UPDAPP
Pooling for device removal...
Device removed
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&2f32da7b&1&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[285.87 MB]...
erasing APE [00040000 to 00082FFF]
erasing APE [00083400 to 003FFFFF]
erasing APE [00800000 to 00D5FFFF]
erasing APE [00D60000 to 0A95FFFF]
erasing APE [0A960000 to 0F71FFFF]
erasing APE [08260000 to 09F5FFFF]
erasing APE [09F60000 to 0A95FFFF]
erasing APE [00400000 to 007FFFFF]
in 11.59s
Flash[103.56 MB]...in 40.70s
* * Processed file in 78.78 seconds
Processing File: RM-348_32.001_003_000_U001.uda.fpsx
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&2f32da7b&1&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.31s
Flash[15.98 MB]...in 6.39s
* * Processed file in 6.83 seconds
Processing File: RM-348_32.001_008_prd.language.fpsx
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&2f32da7b&1&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.22s
Flash[11.97 MB]...in 4.89s
* * Processed file in 5.25 seconds
Processing File: RM-348_32.001_53.1_prd.customer.fpsx
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&2f32da7b&1&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.02s
Flash[0.01 MB]...in 0.05s
* * Processed file in 0.22 seconds
Processing File: vivien_eno_imaker_ape_only.fpsx
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&2f32da7b&1&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.05s
Flash[2.59 MB]...in 1.08s
* * Processed file in 1.28 seconds
Restarting device...
Pooling for device removal...
Device disconnected.
* * * Phone flashing done in 1:36 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V ICPR72_09w18.4/14-10-09/RM-348 (c) Nokia
IMEI: 356387022325162
Factory Default Settings...OK
Dynamic camera configuration...
رد: N79 RM-348 مشكلة حدثت بعد كتابة ملف ENO
رد مع اقتباس
.gif)
المفضلات