قائمة الاعضاء المشار اليهم
النتائج 1 إلى 6 من 6

الموضوع: jتفليش C3 خلال 30 ثانية بواسطة USP

  1. #1
    صديق المنتدى
    الصورة الرمزية NAPOLI

    الحالة
    غير متواجد
    تاريخ التسجيل
    Nov 2008
    Sonork
    ورفعنا لك ذكرك
    المشاركات
    5,520
    الشكر
    15,756
    شُكر 7,882 فى 3,405 مشاركة
    تم تذكيره فى
    1 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    140

    افتراضي jتفليش C3 خلال 30 ثانية بواسطة USP

    attachmentphp?attachmentid85685&ampd1297623009


    Processing pre flash tasks...
    Pre flash tasks finished, continuing...
    Processing rm614__07.20.mcusw (CMT)...
    Booting CMT...
    [Nokia USB Flashing Generic]: Port opened OK!
    New ROM Detected
    CMT_SYSTEM_ASIC_ID: 000000000000000022000509200C0000
    CMT_EM_ASIC_ID: 00005361
    CMT_PUBLIC_ID: 000000000008A05D78A7203174783B6E8EFBE3DD
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 1B0D74C532CA1C6133940C740E8C786E
    CMT_BOOT_ROM_CRC: DE56D582
    CMT_SECURE_ROM_CRC: BDDE7A3A
    CMT Ready!
    rm614__07.20.mcusw, Type: Flash Image, Algo: BB5, XSR 1.6
    Searching for BootCode: DualLine 32Bit
    BCM21351_usb2nd.fg, Type: 2nd Boot Loader, Rev: 513.10.34.1, Algo: BB5
    Using NEW BB5 FLASHING PROTOCOL
    Transmission Mode Requested: Control USB, Accepted: Control USB
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0010001100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC003000000431, Samsung, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
    BCM21351_XSR16_usbalg.fg, Type: Algorithm, Rev: 513.10.34.1, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
    Box TX2 Data Pin set to: Service Pin 3
    Waiting for FUR Client become avaiable...
    [Nokia USB Flashing Generic]: Port opened OK!
    FUR Avaiable!
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Overriding VPP Setting, USB can't use VPP
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
    Sending Certificates...
    Certificates OK
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x00000000-0x0001FFFF, ONENAND
    EraseArea[0,CMT]: 0x00020000-0x000203FF, ONENAND
    EraseArea[0,CMT]: 0x00060000-0x012FFFFF, ONENAND
    EraseArea[0,CMT]: 0x01300000-0x01DFFFFF, ONENAND
    EraseArea[0,CMT]: 0x02600000-0x029FFFFF, ONENAND
    Erase Partition (CMT)
    Erase Partition (CMT)
    Waiting 320s for erasure finish...
    Erase taken 0.515s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT KEYS Certificate...
    Writing CMT ADA Certificate...
    Writing CMT PRIMAPP Certificate...
    Writing CMT RAP3NAND Certificate...
    Writing CMT PASUBTOC Certificate...
    Writing CMT PAPUBKEYS Certificate...
    Writing CMT UPDAPP Certificate...
    Writing CMT MCUSW Certificate...
    Writing CMT MCUSW1 Certificate...
    Writing CMT GENIO_INIT Certificate...
    Writing CMT ISA+DYNSW Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 7.375s
    Flashing Speed: 31722.35 kBit/S
    Processing rm614__07.20.mcusw (APE)...
    Processing rm614__07.20.ppm_f (CMT)...
    rm614__07.20.ppm_f, Type: Flash Image, Algo: BB5, XSR 1.6
    PAPUBKEYS Hash for CMT: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x01E00000-0x025FFFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.78s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 1.250s
    Flashing Speed: 39910.05 kBit/S
    Processing rm614__07.20.ppm_f (APE)...
    Processing rm614__07.20.image_f_059C7B3 (CMT)...
    rm614__07.20.image_f_059C7B3, Type: Flash Image, Algo: BB5, XSR 1.6
    PAPUBKEYS Hash for CMT: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x02A00000-0x0753FFFF, ONENAND
    Erase Partition (CMT)
    Waiting 320s for erasure finish...
    Erase taken 1.125s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 2.828s
    Flashing Speed: 37916.27 kBit/S
    Processing rm614__07.20.image_f_059C7B3 (APE)...
    Restarting MCU...
    All images processed OK! Processing post flash tasks...
    Setting Factory Defaults...
    [Nokia C3-00 USB Phonet]: Port opened OK!
    [Nokia C3-00 USB Phonet]: Port opened OK!
    [Nokia C3-00 USB Phonet]: Port opened OK!
    [Nokia C3-00 USB Phonet]: Port opened OK!
    [Nokia C3-00 USB Phonet]: Port opened OK!
    Factory defaults OK
    Reading info...
    [Nokia C3-00 USB Phonet]: Port opened OK!
    MCU Version V 07.20
    MCU Date 29-10-10
    Product RM-614 (Nokia C3-00)
    Manufacturer (c) Nokia
    IMEI 354844043415887
    Mastercode 207616417
    IMEI Spare 3A45480434148508
    IMEI SV 3345480434148528F3000000
    PPM V 07.20, 29-10-10, RM-614, (c) Nokia , F
    CNT Content: f_059C7B3, V 07.20, 29-10-10, RM-614, (c) Nokia
    PSN DSK758636
    Product Code 0594156
    Module Code 0204418
    Basic Product Code 0587486
    PSD 0000000000000000
    LPSN 0
    WLAN MAC 181456721A80
    HW 1003
    RFIC 9
    LCD SEIKO
    BT 4217-v529
    Simlock Server SIMLOCK SERVER
    Simlock Key 2440700000000000
    Simlock Profile 0000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [1,2] State: OPENED Type: GID Data: FFFF
    Simlock [1,3] State: OPENED Type: GID Data: FFFF
    Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [2,2] State: OPENED Type: GID Data: FFFF
    Simlock [2,3] State: OPENED Type: GID Data: FFFF
    Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [3,2] State: OPENED Type: GID Data: FFFF
    Simlock [3,3] State: OPENED Type: GID Data: FFFF
    Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [4,2] State: OPENED Type: GID Data: FFFF
    Simlock [4,3] State: OPENED Type: GID Data: FFFF
    Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [5,2] State: OPENED Type: GID Data: FFFF
    Simlock [5,3] State: OPENED Type: GID Data: FFFF
    Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [6,2] State: OPENED Type: GID Data: FFFF
    Simlock [6,3] State: OPENED Type: GID Data: FFFF
    Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [7,2] State: OPENED Type: GID Data: FFFF
    Simlock [7,3] State: OPENED Type: GID Data: FFFF
    Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Read info thread finished, continuing...
    Post flash tasks finished!
    Flashing successfully finished!




  2. # ADS
    Circuit advertisement
    تاريخ التسجيل
    Always
    المشاركات
    Many
  • # ADS

    تاريخ التسجيل
    Always
    المشاركات
    Many


  • #2
    صديق المنتدى
    الصورة الرمزية khaledrepa

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2010
    الدولة
    الجزائر الغالية
    Sonork
    0000000000000
    Phone
    e1081
    المشاركات
    6,377
    الشكر
    13,208
    شُكر 15,207 فى 4,458 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    1 مواضيع
    معدل تقييم المستوى
    358

    افتراضي رد: jتفليش C3 خلال 30 ثانية بواسطة USP

    بارك الله فيك على التجربة الرائعة

  • #3
    .: جيماوي مشارك :.
    الصورة الرمزية gem-gsm

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jan 2011
    المشاركات
    136
    الشكر
    394
    شُكر 60 فى 40 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    13

    افتراضي رد: jتفليش C3 خلال 30 ثانية بواسطة USP

    شكرا على الخبر المهم

  • #4
    .: جيماوي رائع :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2007
    المشاركات
    503
    الشكر
    0
    شُكر 72 فى 56 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    25

    افتراضي رد: jتفليش C3 خلال 30 ثانية بواسطة USP

    شكرا لك حبيبي

  • #5
    .: جيماوي رائع :.
    الصورة الرمزية s_p_y

    الحالة
    غير متواجد
    تاريخ التسجيل
    Dec 2009
    المشاركات
    828
    الشكر
    1,049
    شُكر 305 فى 230 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    23

    افتراضي رد: jتفليش C3 خلال 30 ثانية بواسطة USP

    مبروك يا برنس

  • #6
    .: جيماوي جديد :.

    الحالة
    غير متواجد
    تاريخ التسجيل
    Jun 2012
    المشاركات
    13
    الشكر
    0
    Thanked 2 Times in 1 Post
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    10

    افتراضي رد: jتفليش C3 خلال 30 ثانية بواسطة USP

    اقتباس المشاركة الأصلية كتبت بواسطة NAPOLI مشاهدة المشاركة
    attachmentphp?attachmentid85685&ampd1297623009


    Processing pre flash tasks...
    Pre flash tasks finished, continuing...
    Processing rm614__07.20.mcusw (CMT)...
    Booting CMT...
    [Nokia USB Flashing Generic]: Port opened OK!
    New ROM Detected
    CMT_SYSTEM_ASIC_ID: 000000000000000022000509200C0000
    CMT_EM_ASIC_ID: 00005361
    CMT_PUBLIC_ID: 000000000008A05D78A7203174783B6E8EFBE3DD
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 1B0D74C532CA1C6133940C740E8C786E
    CMT_BOOT_ROM_CRC: DE56D582
    CMT_SECURE_ROM_CRC: BDDE7A3A
    CMT Ready!
    rm614__07.20.mcusw, Type: Flash Image, Algo: BB5, XSR 1.6
    Searching for BootCode: DualLine 32Bit
    BCM21351_usb2nd.fg, Type: 2nd Boot Loader, Rev: 513.10.34.1, Algo: BB5
    Using NEW BB5 FLASHING PROTOCOL
    Transmission Mode Requested: Control USB, Accepted: Control USB
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0010001100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC003000000431, Samsung, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0030 (Samsung), Size: 128MBytes, VPP: Not Supported
    BCM21351_XSR16_usbalg.fg, Type: Algorithm, Rev: 513.10.34.1, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
    Box TX2 Data Pin set to: Service Pin 3
    Waiting for FUR Client become avaiable...
    [Nokia USB Flashing Generic]: Port opened OK!
    FUR Avaiable!
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Overriding VPP Setting, USB can't use VPP
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
    Sending Certificates...
    Certificates OK
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x00000000-0x0001FFFF, ONENAND
    EraseArea[0,CMT]: 0x00020000-0x000203FF, ONENAND
    EraseArea[0,CMT]: 0x00060000-0x012FFFFF, ONENAND
    EraseArea[0,CMT]: 0x01300000-0x01DFFFFF, ONENAND
    EraseArea[0,CMT]: 0x02600000-0x029FFFFF, ONENAND
    Erase Partition (CMT)
    Erase Partition (CMT)
    Waiting 320s for erasure finish...
    Erase taken 0.515s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT KEYS Certificate...
    Writing CMT ADA Certificate...
    Writing CMT PRIMAPP Certificate...
    Writing CMT RAP3NAND Certificate...
    Writing CMT PASUBTOC Certificate...
    Writing CMT PAPUBKEYS Certificate...
    Writing CMT UPDAPP Certificate...
    Writing CMT MCUSW Certificate...
    Writing CMT MCUSW1 Certificate...
    Writing CMT GENIO_INIT Certificate...
    Writing CMT ISA+DYNSW Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 7.375s
    Flashing Speed: 31722.35 kBit/S
    Processing rm614__07.20.mcusw (APE)...
    Processing rm614__07.20.ppm_f (CMT)...
    rm614__07.20.ppm_f, Type: Flash Image, Algo: BB5, XSR 1.6
    PAPUBKEYS Hash for CMT: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x01E00000-0x025FFFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.78s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 1.250s
    Flashing Speed: 39910.05 kBit/S
    Processing rm614__07.20.ppm_f (APE)...
    Processing rm614__07.20.image_f_059C7B3 (CMT)...
    rm614__07.20.image_f_059C7B3, Type: Flash Image, Algo: BB5, XSR 1.6
    PAPUBKEYS Hash for CMT: 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x02A00000-0x0753FFFF, ONENAND
    Erase Partition (CMT)
    Waiting 320s for erasure finish...
    Erase taken 1.125s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 2.828s
    Flashing Speed: 37916.27 kBit/S
    Processing rm614__07.20.image_f_059C7B3 (APE)...
    Restarting MCU...
    All images processed OK! Processing post flash tasks...
    Setting Factory Defaults...
    [Nokia C3-00 USB Phonet]: Port opened OK!
    [Nokia C3-00 USB Phonet]: Port opened OK!
    [Nokia C3-00 USB Phonet]: Port opened OK!
    [Nokia C3-00 USB Phonet]: Port opened OK!
    [Nokia C3-00 USB Phonet]: Port opened OK!
    Factory defaults OK
    Reading info...
    [Nokia C3-00 USB Phonet]: Port opened OK!
    MCU Version V 07.20
    MCU Date 29-10-10
    Product RM-614 (Nokia C3-00)
    Manufacturer (c) Nokia
    IMEI 354844043415887
    Mastercode 207616417
    IMEI Spare 3A45480434148508
    IMEI SV 3345480434148528F3000000
    PPM V 07.20, 29-10-10, RM-614, (c) Nokia , F
    CNT Content: f_059C7B3, V 07.20, 29-10-10, RM-614, (c) Nokia
    PSN DSK758636
    Product Code 0594156
    Module Code 0204418
    Basic Product Code 0587486
    PSD 0000000000000000
    LPSN 0
    WLAN MAC 181456721A80
    HW 1003
    RFIC 9
    LCD SEIKO
    BT 4217-v529
    Simlock Server SIMLOCK SERVER
    Simlock Key 2440700000000000
    Simlock Profile 0000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [1,2] State: OPENED Type: GID Data: FFFF
    Simlock [1,3] State: OPENED Type: GID Data: FFFF
    Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [2,2] State: OPENED Type: GID Data: FFFF
    Simlock [2,3] State: OPENED Type: GID Data: FFFF
    Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [3,2] State: OPENED Type: GID Data: FFFF
    Simlock [3,3] State: OPENED Type: GID Data: FFFF
    Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [4,2] State: OPENED Type: GID Data: FFFF
    Simlock [4,3] State: OPENED Type: GID Data: FFFF
    Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [5,2] State: OPENED Type: GID Data: FFFF
    Simlock [5,3] State: OPENED Type: GID Data: FFFF
    Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [6,2] State: OPENED Type: GID Data: FFFF
    Simlock [6,3] State: OPENED Type: GID Data: FFFF
    Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [7,2] State: OPENED Type: GID Data: FFFF
    Simlock [7,3] State: OPENED Type: GID Data: FFFF
    Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Read info thread finished, continuing...
    Post flash tasks finished!
    Flashing successfully finished!
    la;,v ;ed

    مشكور كثير اخي

  • الكلمات الدلالية لهذا الموضوع

    المفضلات

    المفضلات

    ضوابط المشاركة

    • لا تستطيع إضافة مواضيع جديدة
    • لا تستطيع الرد على المواضيع
    • لا تستطيع إرفاق ملفات
    • لا تستطيع تعديل مشاركاتك
    •