ارجوا المساعده ف
ATF Box is not in USB 2.0 Mode
==============================================
* Click the "Reset Box" Button to Try Again
** If Problem is Not Solved...
1. Make Sure you are NOT using USB HUBS
2. Make Sure your USB port is USB 2.0
3. Make Sure you are using the latest Drivers
*** If Problem is STILL Not Solved
1. Use a THICKER USB Cable
2. Connect ATF Directly to the Root USB Port
3. Uninstall Drivers, Reboot PC, Reinstall
**** If you are still Stuck...
1. Search your entire PC for "ftdibus.sys
2. Delete all "ftdibus.sys" files you find
3. Reboot PC...
4. Disconnect ATF Box and all Boxes from PC
5. Run C:\AdvanceBox Turbo Flasher\Driver\Remove_ATF_Drivers\Remove_ATF_Drivers.bat
6. ReInstall ATF Software
7. Connect ATF Box Only to your USB Port
8. Install the Correct Drivers
******************************************
INIT : FAILED , CHECK YOUR BOX FIRMWARE بوكس التيربو عرفت البوكس وتمت عملية التعريف وعند فتح البرنامج يعطي هذه الرسالة ربنا يخليكم
المفضلات