مشكلة بخصوص جهاز نوكيا 6500s

[asd_2001_1990]

يا جماعة عندي جهاز نوكيا 6500s كان محتاج سوفت وير ولما عملتلو سوفت وير واجت مشكلة
الجهاز بياخد سوفت وير كامل بس ما برضى يدخل على التست مود ولا ياخد Factory Setting
طبعا الجهاز ما بياخد سوفت وير ولا ببين على الكيبل او الملاقط
بس انا عملت سوفت وير على usb
والمشكلة نفسها واجهتها على الجاف والسايكلون
وهاي المعلومات لما عملت السوفت وير

Scanning avaiable products...

Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 21 products, Filtering BB5 Products - wait...
18 Products left after filtering. Ready.
Retrieving Variants for Product RM-240 - wait...
2 Variants Retrieved
Processing pre flash tasks...
Read RPL operation not possible for USB bus
Backing up simlock...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
Failed to prepare BB5 USB Connection -> USB Boot ROM Not detected, timeout
Failed to Process all Image files -> Failed to prepare BB5 USB Flashing
Processing pre flash tasks...
Read RPL operation not possible for USB bus
Backing up simlock...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
Failed to prepare BB5 USB Connection -> USB Boot ROM Not detected, timeout
Failed to Process all Image files -> Failed to prepare BB5 USB Flashing
Processing pre flash tasks...
Read RPL operation not possible for USB bus
Backing up simlock...
[BB5 NMWCD]: Found 1 active devices
[Nokia USB Flashing Generic]: Opening Connection
[Nokia USB Flashing Generic]: Port opened OK!
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 1 active devices
[Nokia USB Flashing Generic]: Opening Connection
[Nokia USB Flashing Generic]: Port opened OK!
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
[BB5 BootRom]: Found 1 active devices
[Nokia USB Flashing Generic]: Opening Connection
[Nokia USB Flashing Generic]: Port opened OK!
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1B400007D0F50154FF904FB3E3348DE2E54A5148
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
DeadUSB.raw, Type: 2nd Boot Loader, Rev: , Algo: BB5
Sending RAW Loader...
Sending CMT UPDAPP Certificate and Data...
Waiting for ADL Server Startup...
[BB5 ADL Server]: Found 1 active devices
[Nokia BB5 ADL Loader USB Generic]: Opening Connection
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
ADL Server Startup Confirmed OK!
Processing rm240__09.60.mcusw (CMT)...
rm240__09.60.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Started flash erase
EraseArea[0,CMT]: 0x00000000-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x01480000-0x015FFFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x0147FFFF, NOR
Erase taken 6.375s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
All blocks written OK! Time taken 146.343s
Flashing Speed: 1166.97 kBit/S
Processing rm240__09.60.ppm_m1 (CMT)...
rm240__09.60.ppm_m1, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Started flash erase
EraseArea[0,CMT]: 0x01600000-0x01CBFFFF, NOR
Erase taken 0.875s
Writing all blocks...
All blocks written OK! Time taken 36.484s
Flashing Speed: 1146.83 kBit/S
Processing rm240__09.60_ism_018.image_m1_eg (CMT)...
rm240__09.60_ism_018.image_m1_eg, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Started flash erase
EraseArea[0,CMT]: 0x01FC0000-0x03F9FFFF, NOR
EraseArea[0,CMT]: 0x01CC0000-0x01FBFFFF, NOR
Erase taken 4.687s
Writing all blocks...
All blocks written OK! Time taken 73.875s
Flashing Speed: 1250.53 kBit/S
Restarting CMT...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Factory defaults OK
Reading info...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
ارجو المساعدة

[asd_2001_1990]

حاليا الجهاز بشتغل شوي شاشة بيضا وبفصل
شو يا جماعة 7 مشاهدات وما في ردوود

[emad.tel]

اخي فلاشو على ufsاوعلى usbعلى فونيكس والله الموفق

[asd_2001_1990]

جربت والمشكلة كما هي
الوضع الحالي للشهاز بشتغل شاشة بيضا وبفصل بور
وعملت سوفت وير على الجاف

JAF version 1.98.65 beta1
Detected PKEY: 900098C2
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.29.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved ******** of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-240\
Searching for default ******** of ini...
Checking path: \Products\RM-240\
Searching for JAF saved ******** of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-240\
Scanning ini files...
Searching for default ******** of ini...
Checking path: \Products\RM-240\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-240\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60.ppm_m1
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60_ism_018.image_m1_eg
APE Variant file: NONE
Languages in ppm: English,French,Arabic
Detected P-KEY: 900098C2
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Not found!!!
Detected P-KEY: 900098C2
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
Elf2flash 07.14.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting..........................................................................Loader Sent!
Stage 3 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 0400
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 2337, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60.mcusw...
Erasing cmt zone 00000000 - 0001FFFF ... Erase result: 0000
Erasing cmt zone 00040000 - 000BFFFF ... Erase result: 0000
Erasing cmt zone 000C0000 - 0013FFFF ... Erase result: 0000
Erasing cmt zone 01480000 - 015FFFFF ... Erase result: 0000
Erasing cmt zone 00140000 - 0147FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60.ppm_m1...
Erasing cmt zone 01600000 - 01CBFFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60_ism_018.image_m1_eg...
Erasing cmt zone 01FC0000 - 03F9FFFF ... Erase result: 0000
Erasing cmt zone 01CC0000 - 01FBFFFF ... Erase result: 0000
Send CMT CFG...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60.mcusw...
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
Sending CMT HASH for UPDAPP
Sending CMT HASH for DSP0
Sending CMT HASH for MCUSW
Processing C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60.ppm_m1...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60_ism_018.image_m1_eg...
Rebooting...
Restarting CMT...
Pooling phone...
MCUSW: (null)
APESW: (null)
VariantSW: (null)
Prodcode:
Done!

[asd_2001_1990]

يا جماعة هاي المشكلة واجهتني في جهاز 6120 ممكن حدا يساعدني

يا جماعة عندي جهاز نوكيا 6500s كان محتاج سوفت وير ولما عملتلو سوفت وير واجت مشكلة

الجهاز بياخد سوفت وير كامل بس ما برضى يدخل على التست مود ولا ياخد Factory Setting
طبعا الجهاز ما بياخد سوفت وير ولا ببين على الكيبل او الملاقط
بس انا عملت سوفت وير على usb
والمشكلة نفسها واجهتها على الجاف والسايكلون

وهاي المعلومات لما عملت السوفت وير

Scanning avaiable products...

Processing C:\Program Files\Nokia\Phoenix\Products\...
Found 21 products, Filtering BB5 Products - wait...
18 Products left after filtering. Ready.
Retrieving Variants for Product RM-240 - wait...
2 Variants Retrieved
Processing pre flash tasks...
Read RPL operation not possible for USB bus
Backing up simlock...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
Failed to prepare BB5 USB Connection -> USB Boot ROM Not detected, timeout
Failed to Process all Image files -> Failed to prepare BB5 USB Flashing
Processing pre flash tasks...
Read RPL operation not possible for USB bus
Backing up simlock...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
Failed to prepare BB5 USB Connection -> USB Boot ROM Not detected, timeout
Failed to Process all Image files -> Failed to prepare BB5 USB Flashing
Processing pre flash tasks...
Read RPL operation not possible for USB bus
Backing up simlock...
[BB5 NMWCD]: Found 1 active devices
[Nokia USB Flashing Generic]: Opening Connection
[Nokia USB Flashing Generic]: Port opened OK!
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 1 active devices
[Nokia USB Flashing Generic]: Opening Connection
[Nokia USB Flashing Generic]: Port opened OK!
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
[BB5 BootRom]: Found 1 active devices
[Nokia USB Flashing Generic]: Opening Connection
[Nokia USB Flashing Generic]: Port opened OK!
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1B400007D0F50154FF904FB3E3348DE2E54A5148
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
DeadUSB.raw, Type: 2nd Boot Loader, Rev: , Algo: BB5
Sending RAW Loader...
Sending CMT UPDAPP Certificate and Data...
Waiting for ADL Server Startup...
[BB5 ADL Server]: Found 1 active devices
[Nokia BB5 ADL Loader USB Generic]: Opening Connection
[Nokia BB5 ADL Loader USB Generic]: Port opened OK!
ADL Server Startup Confirmed OK!
Processing rm240__09.60.mcusw (CMT)...
rm240__09.60.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Started flash erase
EraseArea[0,CMT]: 0x00000000-0x0001FFFF, NOR
EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
EraseArea[0,CMT]: 0x01480000-0x015FFFFF, NOR
EraseArea[0,CMT]: 0x00140000-0x0147FFFF, NOR
Erase taken 6.375s
Writing all blocks...
Writing CMT NOLO Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT PASUBTOC Certificate...
WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT DSP0 Certificate...
Writing CMT MCUSW Certificate...
All blocks written OK! Time taken 146.343s
Flashing Speed: 1166.97 kBit/S
Processing rm240__09.60.ppm_m1 (CMT)...
rm240__09.60.ppm_m1, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Started flash erase
EraseArea[0,CMT]: 0x01600000-0x01CBFFFF, NOR
Erase taken 0.875s
Writing all blocks...
All blocks written OK! Time taken 36.484s
Flashing Speed: 1146.83 kBit/S
Processing rm240__09.60_ism_018.image_m1_eg (CMT)...
rm240__09.60_ism_018.image_m1_eg, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
Started flash erase
EraseArea[0,CMT]: 0x01FC0000-0x03F9FFFF, NOR
EraseArea[0,CMT]: 0x01CC0000-0x01FBFFFF, NOR
Erase taken 4.687s
Writing all blocks...
All blocks written OK! Time taken 73.875s
Flashing Speed: 1250.53 kBit/S
Restarting CMT...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Factory defaults OK
Reading info...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
ارجو المساعدة