قائمة الاعضاء المشار اليهم
النتائج 1 إلى 5 من 5

الموضوع: مشكلة بخصوص جهاز نوكيا 6500s

  1. #1
    .: جيماوي فعال :.
    الصورة الرمزية asd_2001_1990

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2009
    المشاركات
    241
    الشكر
    97
    شُكر 30 فى 26 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    18

    Exclamation مشكلة بخصوص جهاز نوكيا 6500s

    يا جماعة عندي جهاز نوكيا 6500s كان محتاج سوفت وير ولما عملتلو سوفت وير واجت مشكلة
    الجهاز بياخد سوفت وير كامل بس ما برضى يدخل على التست مود ولا ياخد Factory Setting
    طبعا الجهاز ما بياخد سوفت وير ولا ببين على الكيبل او الملاقط
    بس انا عملت سوفت وير على usb
    والمشكلة نفسها واجهتها على الجاف والسايكلون
    وهاي المعلومات لما عملت السوفت وير
    Scanning avaiable products...

    Processing C:\Program Files\Nokia\Phoenix\Products\...
    Found 21 products, Filtering BB5 Products - wait...
    18 Products left after filtering. Ready.
    Retrieving Variants for Product RM-240 - wait...
    2 Variants Retrieved
    Processing pre flash tasks...
    Read RPL operation not possible for USB bus
    Backing up simlock...
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    Simlock backup problem -> Phone not detected
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Selecting USB Flashing Method...
    [BB5 ADL Server]: Found 0 active devices
    [BB5 ADL Server]: Not Found!
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    Proceeding with Dead USB Mode
    Press power-on shortly to run USB Boot ROM
    Failed to prepare BB5 USB Connection -> USB Boot ROM Not detected, timeout
    Failed to Process all Image files -> Failed to prepare BB5 USB Flashing
    Processing pre flash tasks...
    Read RPL operation not possible for USB bus
    Backing up simlock...
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    Simlock backup problem -> Phone not detected
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Selecting USB Flashing Method...
    [BB5 ADL Server]: Found 0 active devices
    [BB5 ADL Server]: Not Found!
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    Proceeding with Dead USB Mode
    Press power-on shortly to run USB Boot ROM
    Failed to prepare BB5 USB Connection -> USB Boot ROM Not detected, timeout
    Failed to Process all Image files -> Failed to prepare BB5 USB Flashing
    Processing pre flash tasks...
    Read RPL operation not possible for USB bus
    Backing up simlock...
    [BB5 NMWCD]: Found 1 active devices
    [Nokia USB Flashing Generic]: Opening Connection
    [Nokia USB Flashing Generic]: Port opened OK!
    Simlock backup problem -> Phone not detected
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Selecting USB Flashing Method...
    [BB5 ADL Server]: Found 0 active devices
    [BB5 ADL Server]: Not Found!
    [BB5 NMWCD]: Found 1 active devices
    [Nokia USB Flashing Generic]: Opening Connection
    [Nokia USB Flashing Generic]: Port opened OK!
    Proceeding with Dead USB Mode
    Press power-on shortly to run USB Boot ROM
    [BB5 BootRom]: Found 1 active devices
    [Nokia USB Flashing Generic]: Opening Connection
    [Nokia USB Flashing Generic]: Port opened OK!
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID: 00000295
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 1B400007D0F50154FF904FB3E3348DE2E54A5148
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC: 273F6D55
    CMT_SECURE_ROM_CRC: DFAAF68F
    DeadUSB.raw, Type: 2nd Boot Loader, Rev: , Algo: BB5
    Sending RAW Loader...
    Sending CMT UPDAPP Certificate and Data...
    Waiting for ADL Server Startup...
    [BB5 ADL Server]: Found 1 active devices
    [Nokia BB5 ADL Loader USB Generic]: Opening Connection
    [Nokia BB5 ADL Loader USB Generic]: Port opened OK!
    ADL Server Startup Confirmed OK!
    Processing rm240__09.60.mcusw (CMT)...
    rm240__09.60.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Started flash erase
    EraseArea[0,CMT]: 0x00000000-0x0001FFFF, NOR
    EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
    EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
    EraseArea[0,CMT]: 0x01480000-0x015FFFFF, NOR
    EraseArea[0,CMT]: 0x00140000-0x0147FFFF, NOR
    Erase taken 6.375s
    Writing all blocks...
    Writing CMT NOLO Certificate...
    Writing CMT KEYS Certificate...
    Writing CMT PRIMAPP Certificate...
    Writing CMT PASUBTOC Certificate...
    WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
    Writing CMT PAPUBKEYS Certificate...
    Writing CMT UPDAPP Certificate...
    Writing CMT DSP0 Certificate...
    Writing CMT MCUSW Certificate...
    All blocks written OK! Time taken 146.343s
    Flashing Speed: 1166.97 kBit/S
    Processing rm240__09.60.ppm_m1 (CMT)...
    rm240__09.60.ppm_m1, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Started flash erase
    EraseArea[0,CMT]: 0x01600000-0x01CBFFFF, NOR
    Erase taken 0.875s
    Writing all blocks...
    All blocks written OK! Time taken 36.484s
    Flashing Speed: 1146.83 kBit/S
    Processing rm240__09.60_ism_018.image_m1_eg (CMT)...
    rm240__09.60_ism_018.image_m1_eg, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Started flash erase
    EraseArea[0,CMT]: 0x01FC0000-0x03F9FFFF, NOR
    EraseArea[0,CMT]: 0x01CC0000-0x01FBFFFF, NOR
    Erase taken 4.687s
    Writing all blocks...
    All blocks written OK! Time taken 73.875s
    Flashing Speed: 1250.53 kBit/S
    Restarting CMT...
    All images processed OK! Processing post flash tasks...
    Setting Factory Defaults...
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    Factory defaults OK
    Reading info...
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    Failed to read info -> Phone not detected
    Read info thread finished, continuing...
    Post flash tasks finished!
    Flashing successfully finished!
    ارجو المساعدة




  2. # ADS
    Circuit advertisement
    تاريخ التسجيل
    Always
    المشاركات
    Many
  • # ADS

    تاريخ التسجيل
    Always
    المشاركات
    Many


  • #2
    .: جيماوي فعال :.
    الصورة الرمزية asd_2001_1990

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2009
    المشاركات
    241
    الشكر
    97
    شُكر 30 فى 26 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    18

    افتراضي رد: مشكلة بخصوص جهاز نوكيا 6500s

    حاليا الجهاز بشتغل شوي شاشة بيضا وبفصل
    شو يا جماعة 7 مشاهدات وما في ردوود

  • #3
    .: جيماوي نشيط :.
    الصورة الرمزية emad.tel

    الحالة
    غير متواجد
    تاريخ التسجيل
    Dec 2009
    الدولة
    سوريا
    Phone
    N97
    المشاركات
    455
    الشكر
    0
    شُكر 91 فى 73 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    19

    افتراضي رد: مشكلة بخصوص جهاز نوكيا 6500s

    اخي فلاشو على ufsاوعلى usbعلى فونيكس والله الموفق

  • #4
    .: جيماوي فعال :.
    الصورة الرمزية asd_2001_1990

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2009
    المشاركات
    241
    الشكر
    97
    شُكر 30 فى 26 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    18

    افتراضي رد: مشكلة بخصوص جهاز نوكيا 6500s

    جربت والمشكلة كما هي
    الوضع الحالي للشهاز بشتغل شاشة بيضا وبفصل بور
    وعملت سوفت وير على الجاف
    JAF version 1.98.65 beta1
    Detected PKEY: 900098C2
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 7.1.29.0
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Searching for JAF saved ******** of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-240\
    Searching for default ******** of ini...
    Checking path: \Products\RM-240\
    Searching for JAF saved ******** of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-240\
    Scanning ini files...
    Searching for default ******** of ini...
    Checking path: \Products\RM-240\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-240\
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60.mcusw
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60.ppm_m1
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60_ism_018.image_m1_eg
    APE Variant file: NONE
    Languages in ppm: English,French,Arabic
    Detected P-KEY: 900098C2
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Not found!!!
    Detected P-KEY: 900098C2
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 06.02.002
    Elf2flash 07.14.000
    CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step3...
    Sending RAW Loader...
    ...................Loader Sent!
    Stage 2 starting..........................................................................Loader Sent!
    Stage 3 starting..................Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 0400
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 2337, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60.mcusw...
    Erasing cmt zone 00000000 - 0001FFFF ... Erase result: 0000
    Erasing cmt zone 00040000 - 000BFFFF ... Erase result: 0000
    Erasing cmt zone 000C0000 - 0013FFFF ... Erase result: 0000
    Erasing cmt zone 01480000 - 015FFFFF ... Erase result: 0000
    Erasing cmt zone 00140000 - 0147FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60.ppm_m1...
    Erasing cmt zone 01600000 - 01CBFFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60_ism_018.image_m1_eg...
    Erasing cmt zone 01FC0000 - 03F9FFFF ... Erase result: 0000
    Erasing cmt zone 01CC0000 - 01FBFFFF ... Erase result: 0000
    Send CMT CFG...
    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60.mcusw...
    Sending CMT HASH for NOLO
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    Sending CMT HASH for UPDAPP
    Sending CMT HASH for DSP0
    Sending CMT HASH for MCUSW
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60.ppm_m1...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-240\rm240__09.60_ism_018.image_m1_eg...
    Rebooting...
    Restarting CMT...
    Pooling phone...
    MCUSW: (null)
    APESW: (null)
    VariantSW: (null)
    Prodcode:
    Done!

  • #5
    .: جيماوي فعال :.
    الصورة الرمزية asd_2001_1990

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2009
    المشاركات
    241
    الشكر
    97
    شُكر 30 فى 26 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    18

    افتراضي رد: مشكلة بخصوص جهاز نوكيا 6500s

    يا جماعة هاي المشكلة واجهتني في جهاز 6120 ممكن حدا يساعدني




    اقتباس المشاركة الأصلية كتبت بواسطة asd_2001_1990 مشاهدة المشاركة
    يا جماعة عندي جهاز نوكيا 6500s كان محتاج سوفت وير ولما عملتلو سوفت وير واجت مشكلة

    الجهاز بياخد سوفت وير كامل بس ما برضى يدخل على التست مود ولا ياخد Factory Setting
    طبعا الجهاز ما بياخد سوفت وير ولا ببين على الكيبل او الملاقط
    بس انا عملت سوفت وير على usb
    والمشكلة نفسها واجهتها على الجاف والسايكلون

    وهاي المعلومات لما عملت السوفت وير


    Scanning avaiable products...

    Processing C:\Program Files\Nokia\Phoenix\Products\...
    Found 21 products, Filtering BB5 Products - wait...
    18 Products left after filtering. Ready.
    Retrieving Variants for Product RM-240 - wait...
    2 Variants Retrieved
    Processing pre flash tasks...
    Read RPL operation not possible for USB bus
    Backing up simlock...
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    Simlock backup problem -> Phone not detected
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Selecting USB Flashing Method...
    [BB5 ADL Server]: Found 0 active devices
    [BB5 ADL Server]: Not Found!
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    Proceeding with Dead USB Mode
    Press power-on shortly to run USB Boot ROM
    Failed to prepare BB5 USB Connection -> USB Boot ROM Not detected, timeout
    Failed to Process all Image files -> Failed to prepare BB5 USB Flashing
    Processing pre flash tasks...
    Read RPL operation not possible for USB bus
    Backing up simlock...
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    Simlock backup problem -> Phone not detected
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Selecting USB Flashing Method...
    [BB5 ADL Server]: Found 0 active devices
    [BB5 ADL Server]: Not Found!
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    Proceeding with Dead USB Mode
    Press power-on shortly to run USB Boot ROM
    Failed to prepare BB5 USB Connection -> USB Boot ROM Not detected, timeout
    Failed to Process all Image files -> Failed to prepare BB5 USB Flashing
    Processing pre flash tasks...
    Read RPL operation not possible for USB bus
    Backing up simlock...
    [BB5 NMWCD]: Found 1 active devices
    [Nokia USB Flashing Generic]: Opening Connection
    [Nokia USB Flashing Generic]: Port opened OK!
    Simlock backup problem -> Phone not detected
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Selecting USB Flashing Method...
    [BB5 ADL Server]: Found 0 active devices
    [BB5 ADL Server]: Not Found!
    [BB5 NMWCD]: Found 1 active devices
    [Nokia USB Flashing Generic]: Opening Connection
    [Nokia USB Flashing Generic]: Port opened OK!
    Proceeding with Dead USB Mode
    Press power-on shortly to run USB Boot ROM
    [BB5 BootRom]: Found 1 active devices
    [Nokia USB Flashing Generic]: Opening Connection
    [Nokia USB Flashing Generic]: Port opened OK!
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID: 00000295
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 1B400007D0F50154FF904FB3E3348DE2E54A5148
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC: 273F6D55
    CMT_SECURE_ROM_CRC: DFAAF68F
    DeadUSB.raw, Type: 2nd Boot Loader, Rev: , Algo: BB5
    Sending RAW Loader...
    Sending CMT UPDAPP Certificate and Data...
    Waiting for ADL Server Startup...
    [BB5 ADL Server]: Found 1 active devices
    [Nokia BB5 ADL Loader USB Generic]: Opening Connection
    [Nokia BB5 ADL Loader USB Generic]: Port opened OK!
    ADL Server Startup Confirmed OK!
    Processing rm240__09.60.mcusw (CMT)...
    rm240__09.60.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Started flash erase
    EraseArea[0,CMT]: 0x00000000-0x0001FFFF, NOR
    EraseArea[0,CMT]: 0x00040000-0x000BFFFF, NOR
    EraseArea[0,CMT]: 0x000C0000-0x0013FFFF, NOR
    EraseArea[0,CMT]: 0x01480000-0x015FFFFF, NOR
    EraseArea[0,CMT]: 0x00140000-0x0147FFFF, NOR
    Erase taken 6.375s
    Writing all blocks...
    Writing CMT NOLO Certificate...
    Writing CMT KEYS Certificate...
    Writing CMT PRIMAPP Certificate...
    Writing CMT PASUBTOC Certificate...
    WARNING: CMT PAPUBKEYS Hash is Empty, writing first found PAPUBKEYS
    Writing CMT PAPUBKEYS Certificate...
    Writing CMT UPDAPP Certificate...
    Writing CMT DSP0 Certificate...
    Writing CMT MCUSW Certificate...
    All blocks written OK! Time taken 146.343s
    Flashing Speed: 1166.97 kBit/S
    Processing rm240__09.60.ppm_m1 (CMT)...
    rm240__09.60.ppm_m1, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Started flash erase
    EraseArea[0,CMT]: 0x01600000-0x01CBFFFF, NOR
    Erase taken 0.875s
    Writing all blocks...
    All blocks written OK! Time taken 36.484s
    Flashing Speed: 1146.83 kBit/S
    Processing rm240__09.60_ism_018.image_m1_eg (CMT)...
    rm240__09.60_ism_018.image_m1_eg, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    Started flash erase
    EraseArea[0,CMT]: 0x01FC0000-0x03F9FFFF, NOR
    EraseArea[0,CMT]: 0x01CC0000-0x01FBFFFF, NOR
    Erase taken 4.687s
    Writing all blocks...
    All blocks written OK! Time taken 73.875s
    Flashing Speed: 1250.53 kBit/S
    Restarting CMT...
    All images processed OK! Processing post flash tasks...
    Setting Factory Defaults...
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    Factory defaults OK
    Reading info...
    [BB5 NMWCD]: Found 0 active devices
    [BB5 NMWCD]: Not Found!
    Failed to read info -> Phone not detected
    Read info thread finished, continuing...
    Post flash tasks finished!
    Flashing successfully finished!
    ارجو المساعدة

  • الكلمات الدلالية لهذا الموضوع

    المفضلات

    المفضلات

    ضوابط المشاركة

    • لا تستطيع إضافة مواضيع جديدة
    • لا تستطيع الرد على المواضيع
    • لا تستطيع إرفاق ملفات
    • لا تستطيع تعديل مشاركاتك
    •