LG 18 pin 510, B1300, G1500, W3000, G3100, G5200, G5220c, G5300, G5310, G5400, G7100, G7070, G7120 cell phones cable connector pinout
1 Vbat connected by 1N4001 diode to +5V supply in cable?
2,3 Charge shorted by 1N4001 diode to pin 1 in cable?
4 PWON shorted to pin 18 (VBAT) in cable?
5,6,15,18 Gnd
16 Rx
17 Tx
LG 18 pin CDMA cell phones cable connector pinout
1,18 + 5Vcc
9 Rx
12 Tx
15 Gnd
LG 24 pin C1100, C1200, C1300, C1400, C1500, F2100, F9100, G1600, G5500, G5600, G7000, G7020, G7030, G7050, KG120, KG210, KG220, KG225, KG320, L1100, L1200, L1400, lx5450, lx5550, T5100, vi5225, vx4500, vx4600, vx6000 , 4010, 4011, 4050, 8080 cell phones cable connector pinout
for LG 3G phones (including LG40xx,LG70XX,L11XX and most others with 24 pin conector)
1 Batt_ID
2 VPPFLASH
3 DSR
4 Vin IGN
5 Vin Charge in, (USB +5V accepted)
6 CTS_ON
7 PCM_RXA_IN
8 PCM_CLK
9 PCM_SYNC
10 USB RX USB D-
11 PCM_TXA_OUT
12,19 GND
13 DTMS Rx
14 DFMS Tx
15 USB Tx USB D+
16 USB Vcc
17 CTMS/DCD Serial Rx
18 CFMS/RI Serial Tx
20 RFR_RTS CTS?
21,22 + 4.2v charger. Pins 20 and 21 may be used? May be charged from PC USB +5V power
23 CTS_ON RTS?
24 DTS DTR?
different sources reports:
pins 3,12,19,23 may be shorted in cable;
pin 6 must be shorted by 10KOm resistor to +5v in cable;
pins 2 and 21 should be shorted (confirmed).
CTMS stands for Control To Mobile Station; CFMS stands for Control From Mobile Station; DTMS stands for Data To Mobile Station; DFMS stands for Data From Mobile Station
LG 300, 330W, 800 cell phones cable connector pinout
10,17,18 +Battery
9 Tx Serial Out
12 Rx Serial In
14 DC GND
All LG Pinouts Request [Only Here]
رد مع اقتباس
المفضلات