انا عملت انلوك وحملت سوفت تاني فيرجن 6
ودة اللي جابة
Getting MCU ID
Phone didn't answer with TX line high after power on!
Causes:
1. Phone don't power on -> Check cable
2. TX pin from phone don't make contact -> Check cable
3. UPP damaged -> change UPP
MCU ID: 0xAAAA
Failed! Aborting!
Done!
Phone Restarted...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\********s and Settings\Administrator\Desktop\1650_RM-305_V6.00_AR\rm305_06.00ic
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\********s and Settings\Administrator\Desktop\1650_RM-305_V6.00_AR\rm305_06.00ic
PPM Flash file: C:\********s and Settings\Administrator\Desktop\1650_RM-305_V6.00_AR\rm305_06.000
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\********s and Settings\Administrator\Desktop\1650_RM-305_V6.00_AR\rm305_06.00ic
PPM Flash file: C:\********s and Settings\Administrator\Desktop\1650_RM-305_V6.00_AR\rm305_06.000
CNT Flash file: C:\********s and Settings\Administrator\Desktop\1650_RM-305_V6.00_AR\rm3050_nai6.00ic
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: C:\********s and Settings\Administrator\Desktop\1650_RM-305_V6.00_AR\rm305_06.00ic
Booting phone...
Phone didn't answer with TX line high after power on!
Causes:
1. Phone don't power on -> Check cable
2. TX pin from phone don't make contact -> Check cable
3. UPP damaged -> change UPP
MCU ID: 0xAAAA
This MCU ID is not supported in chosen flash file...
Error booting phone...
مساعدة ضرورية من اهل الخبرة
.gif)
رد: مساعدة ضرورية من اهل الخبرة
المشاركة الأصلية كتبت بواسطة hassan moamen
رد مع اقتباس
المفضلات