1280لا يعمل تشك ويعمل انفو
Getting MCU ID
Incorect MCUID!
Causes:
1. Cable is not good -> check for 68k resistor b/w bsi-gnd in connector and 3.3k resistor in serial with bsi line
MCU ID: 0xFFFF
Can't find boot file...
Failed! Aborting!
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 06.20
01-12-10
RM-647
(c) Nokia
HW version: 3003
PCI version:
UEM version: 1328
UPP version: 8850
LCD version: UNKWN: IDs:
00:00:00
PPM version: V 06.20
01-12-10
RM-647
(c) Nokia
IC
ADSP SW version: V 06.20\n01-12-10\nRM-647\n(c) NMP\nic
Production serial number: 8C18629AI
Product code: 0592307
Module code: 0204426
Basic production code: 059F8R3
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 357383040037052
IMEI spare to net: 3A 75 83 03 04 30 07 05
IMEI SV to net: 33 75 83 03 04 30 07 35 F2
Master Code: 0017345363
Phone type: RM-647, Software version: 06.20, Language Pack: IC
User code: ے#
Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-647.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0592307
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-647\
Searching for default ******** of ini...
Checking path: \Products\RM-647\
Searching for JAF saved ******** of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-647\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
رد مع اقتباس
المفضلات