قائمة الاعضاء المشار اليهم
النتائج 1 إلى 4 من 4

الموضوع: سحب باكاب كامل مع تفليش N86 بالسيكلون الجبار

  1. #1
    صديق المنتدى
    الصورة الرمزية NAPOLI

    الحالة
    غير متواجد
    تاريخ التسجيل
    Nov 2008
    Sonork
    ورفعنا لك ذكرك
    المشاركات
    5,520
    الشكر
    15,756
    شُكر 7,882 فى 3,405 مشاركة
    تم تذكيره فى
    1 مشاركة
    تمت الاشارة اليه فى
    2 مواضيع
    معدل تقييم المستوى
    140

    افتراضي سحب باكاب كامل مع تفليش N86 بالسيكلون الجبار

    فلش ولا تخاف . Handling device: [Cyclone Team], [Cyclone Box]
    Initializing box...
    Box Firmware: Cyclone Nokia Application v01.37, (Apr 22 2010 23:09:11, gcc v4.3.2, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2010 wk16
    Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
    Box Serial Number:
    HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time:
    Initializing security card...
    Card Serial Number:
    Card Firmware Revision:
    Card is activated
    Box is activated
    Started box selftests procedure
    USB Voltage 4.84v PASSED
    MCU Voltage 3.27v PASSED
    Core Voltage 1.77v PASSED
    VBAT Voltage 0.01v PASSED
    VBAT Voltage 4.78v PASSED
    Box VPP disabled
    VPP Voltage 0.04v PASSED
    Internal Box VPP Enabled
    VPP Voltage 4.75v PASSED
    Box VPP disabled
    VPP Voltage 0.04v PASSED
    External Box VPP Enabled
    VPP Voltage 0.04v FAILED - IGNORED - Probably power supply is not connected
    Box VPP disabled
    All box selftests passed!
    Super DCT4 Activation: TRUE
    Initializing FBUS...
    All initialized - Ready to work
    Scanning avaiable products...
    Processing C:\Program Files\Nokia\Phoenix\Products\...
    Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
    Found 38 products, Filtering BB5 Products - wait...
    5 Products left after filtering. Ready.
    Retrieving Variants for Product RM-484 - wait...
    36 Variants Retrieved
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 12A00109D07D0052B664C7DFAD5842A214A19AF5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
    RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.5
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 01C4258BFD64668B6824B7545BE4904AE5C408A4
    APE Boot skipped on user request
    Flashbus Write baud set to 5.0Mbits
    Restarting MCU...
    MCU Version V ICPR72_09w17.2
    MCU Date 07-05-09
    Product RM-484
    Manufacturer (c) Nokia
    IMEI 354203032926315
    Mastercode 26745760
    IMEI Spare 3A45020323293601
    IMEI SV 3345020323293601F2000000
    PSN COK280270
    Product Code 0580497
    Basic Product Code 0566653
    PSD 0000000000000000
    LPSN 0
    WLAN MAC 002668A094D3
    APE SW 10.086
    APE Variant 10.08610.086.008.110.086.54.1
    APE Test rm484_ENO_x_2009wk19v0.024
    APE HW 256
    APE ADSP 256
    RETU 16
    TAHVO 22
    AHNE 11
    HW 0900
    RFIC |Vapaus_5.1 | ???
    DSP wmps.ICPR72_09w17_p1
    Simlock Server SIMLOCK SERVER
    Simlock Key 2440700000000000
    Simlock Profile 0000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [1,2] State: OPENED Type: GID Data: FFFF
    Simlock [1,3] State: OPENED Type: GID Data: FFFF
    Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [2,2] State: OPENED Type: GID Data: FFFF
    Simlock [2,3] State: OPENED Type: GID Data: FFFF
    Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [3,2] State: OPENED Type: GID Data: FFFF
    Simlock [3,3] State: OPENED Type: GID Data: FFFF
    Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [4,2] State: OPENED Type: GID Data: FFFF
    Simlock [4,3] State: OPENED Type: GID Data: FFFF
    Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [5,2] State: OPENED Type: GID Data: FFFF
    Simlock [5,3] State: OPENED Type: GID Data: FFFF
    Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [6,2] State: OPENED Type: GID Data: FFFF
    Simlock [6,3] State: OPENED Type: GID Data: FFFF
    Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [7,2] State: OPENED Type: GID Data: FFFF
    Simlock [7,3] State: OPENED Type: GID Data: FFFF
    Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    RPL Creation started...
    Processing CMT Part...
    Storing Product Code...
    Storing PSN...
    Storing HWID...
    Trying to store Simlock...
    Reading Configuration Key...
    Hashing...
    Reading SHA1-RSA Signature...
    Reading SHA1-HMAC Signature...
    Storing Simlock...
    Trying to store WMDRM RPL...
    Reading Keys...
    Storing WMDRM PD...
    Reading Security Block...
    Security block OK and saved to "RM-484_354203032926315_25052010_075113 ?.SecurityBlock.PM"
    WARNING: "12A00109D07D0052B664C7DFAD5842A214A19AF5.C0000CC2" Not Exists, Will read it...
    Reading CYC file from phone...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 12A00109D07D0052B664C7DFAD5842A214A19AF5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    Prepare phone failed with message -> Not found required CMT Secondary Loader
    Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 12A00109D07D0052B664C7DFAD5842A214A19AF5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
    RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.5
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 01C4258BFD64668B6824B7545BE4904AE5C408A4
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    Storing NPC...
    Storing CCC...
    Storing HWC...
    CMT VARIANT Not Found
    Restarting MCU...
    RPL Saved OK
    Starting PM read in range 0-512...
    [1] Reading 28 records
    [1,0] Reading 114 bytes
    [1,2] Reading 10 bytes
    [1,4] Reading 110 bytes
    [1,6] Reading 10 bytes
    [1,7] Reading 214 bytes
    [1,8] Reading 110 bytes
    [1,13] Reading 10 bytes
    [1,16] Reading 208 bytes
    [1,18] Reading 208 bytes
    [1,20] Reading 208 bytes
    [1,22] Reading 16 bytes
    [1,23] Reading 4 bytes
    [1,24] Reading 84 bytes
    [1,26] Reading 110 bytes
    [1,28] Reading 10 bytes
    [1,29] Reading 10 bytes
    [1,31] Reading 208 bytes
    [1,33] Reading 36 bytes
    [1,34] Reading 376 bytes
    [1,35] Reading 16 bytes
    [1,37] Reading 4 bytes
    [1,39] Reading 36 bytes
    [1,40] Reading 16 bytes
    [1,41] Reading 182 bytes
    [1,42] Reading 4 bytes
    [1,43] Reading 36 bytes
    [1,44] Reading 182 bytes
    [1,45] Reading 182 bytes
    [2] Reading 1 records
    [2,0] Reading 448 bytes
    [4] Reading 7 records
    [4,1] Reading 1020 bytes
    [4,3] Reading 10 bytes
    [4,4] Reading 8 bytes
    [4,5] Reading 8 bytes
    [4,9] Reading 5 bytes
    [4,26] Reading 132 bytes
    [4,28] Reading 2 bytes
    [8] Reading 10 records
    [8,0] Reading 2 bytes
    [8,1] Reading 16 bytes
    [8,2] Reading 16 bytes
    [8,3] Reading 128 bytes
    [8,4] Reading 128 bytes
    [8,5] Reading 8 bytes
    [8,7] Reading 4 bytes
    [8,8] Reading 8 bytes
    [8,9] Reading 8 bytes
    [8,10] Reading 24 bytes
    [11] Reading 6 records
    [11,0] Reading 4 bytes
    [11,1] Reading 4 bytes
    [11,2] Reading 4 bytes
    [11,3] Reading 4 bytes
    [11,4] Reading 2 bytes
    [11,5] Reading 1 bytes
    [12] Reading 1 records
    [12,0] Reading 102 bytes
    [26] Reading 1 records
    [26,1] Reading 68 bytes
    [31] Reading 1 records
    [31,4] Reading 22 bytes
    [44] Reading 1 records
    [44,0] Reading 1 bytes
    [50] Reading 1 records
    [50,0] Reading 2 bytes
    [54] Reading 2 records
    [54,0] Reading 2 bytes
    [54,2] Reading 24 bytes
    [88] Reading 1 records
    [88,0] Reading 36 bytes
    [96] Reading 2 records
    [96,0] Reading 2 bytes
    [96,1] Reading 20 bytes
    [107] Reading 6 records
    [107,0] Reading 21 bytes
    [107,1] Reading 79 bytes
    [107,2] Reading 79 bytes
    [107,3] Reading 70 bytes
    [107,25] Reading 132 bytes
    [107,26] Reading 12 bytes
    [117] Reading 10 records
    [117,0] Reading 4 bytes
    [117,1] Reading 3 bytes
    [117,2] Reading 6 bytes
    [117,3] Reading 1 bytes
    [117,4] Reading 9 bytes
    [117,5] Reading 10 bytes
    [117,6] Reading 8 bytes
    [117,13] Reading 3 bytes
    [117,14] Reading 3 bytes
    [117,16] Reading 40 bytes
    [120] Reading 4 records
    [120,0] Reading 944 bytes
    [120,1] Reading 160 bytes
    [120,2] Reading 130 bytes
    [120,3] Reading 112 bytes
    [122] Reading 1 records
    [122,0] Reading 2 bytes
    [193] Reading 4 records
    [193,2] Reading 8 bytes
    [193,3] Reading 32 bytes
    [193,4] Reading 32 bytes
    [193,9] Reading 64 bytes
    [208] Reading 1 records
    [208,1] Reading 4 bytes
    [217] Reading 1 records
    [217,0] Reading 32 bytes
    [291] Reading 1 records
    [291,0] Reading 92 bytes
    [308] Reading 7 records
    [308,0] Reading 1 bytes
    [308,1] Reading 8192 bytes
    [308,3] Reading 1 bytes
    [308,4] Reading 1 bytes
    [308,6] Reading 1 bytes
    [308,7] Reading 1 bytes
    [308,9] Reading 40 bytes
    [309] Reading 9 records
    [309,0] Reading 4 bytes
    [309,1] Reading 2 bytes
    [309,2] Reading 12 bytes
    [309,4] Reading 12 bytes
    [309,5] Reading 12 bytes
    [309,7] Reading 12 bytes
    [309,8] Reading 12 bytes
    [309,17] Reading 12 bytes
    [309,22] Reading 12 bytes
    [313] Reading 1 records
    [313,0] Reading 173 bytes
    [322] Reading 1 records
    [322,0] Reading 1 bytes
    [329] Reading 1 records
    [329,0] Reading 8392 bytes
    [334] Reading 1 records
    [334,0] Reading 1 bytes
    [341] Reading 3 records
    [341,0] Reading 1 bytes
    [341,3] Reading 4 bytes
    [341,4] Reading 4518 bytes
    [354] Reading 1 records
    [354,0] Reading 5 bytes
    [356] Reading 2 records
    [356,0] Reading 2 bytes
    [356,1] Reading 8 bytes
    PM Read OK, Time taken 21.547s
    RPL Creation started...
    Processing CMT Part...
    Storing Product Code...
    Storing PSN...
    Storing HWID...
    Trying to store Simlock...
    Reading Configuration Key...
    Hashing...
    Reading SHA1-RSA Signature...
    Reading SHA1-HMAC Signature...
    Storing Simlock...
    Trying to store WMDRM RPL...
    Reading Keys...
    Storing WMDRM PD...
    Reading Security Block...
    Security block OK and saved to "RM-484_354203032926315_25052010_075217 ?.SecurityBlock.PM"
    WARNING: "12A00109D07D0052B664C7DFAD5842A214A19AF5.C0000CC2" Not Exists, Will read it...
    Reading CYC file from phone...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 12A00109D07D0052B664C7DFAD5842A214A19AF5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    Prepare phone failed with message -> Not found required CMT Secondary Loader
    Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 12A00109D07D0052B664C7DFAD5842A214A19AF5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
    RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.5
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 01C4258BFD64668B6824B7545BE4904AE5C408A4
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    Storing NPC...
    Storing CCC...
    Storing HWC...
    CMT VARIANT Not Found
    Restarting MCU...
    RPL Saved OK
    Processing pre flash tasks...
    Backing up RPL...
    RPL Creation started...
    Processing CMT Part...
    Storing Product Code...
    Storing PSN...
    Storing HWID...
    Trying to store Simlock...
    Reading Configuration Key...
    Hashing...
    Reading SHA1-RSA Signature...
    Reading SHA1-HMAC Signature...
    Storing Simlock...
    Trying to store WMDRM RPL...
    Reading Keys...
    Storing WMDRM PD...
    Reading Security Block...
    Security block OK and saved to "RM-484_354203032926315_25052010_075407 ?.SecurityBlock.PM"
    WARNING: "12A00109D07D0052B664C7DFAD5842A214A19AF5.C0000CC2" Not Exists, Will read it...
    Reading CYC file from phone...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 12A00109D07D0052B664C7DFAD5842A214A19AF5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    Prepare phone failed with message -> Not found required CMT Secondary Loader
    Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 12A00109D07D0052B664C7DFAD5842A214A19AF5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
    RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.5
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 01C4258BFD64668B6824B7545BE4904AE5C408A4
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    Storing NPC...
    Storing CCC...
    Storing HWC...
    CMT VARIANT Not Found
    Restarting MCU...
    RPL Saved OK
    RPL backup thread finished, continuing...
    Backing up simlock...
    MCU Version V ICPR72_09w17.2
    MCU Date 07-05-09
    Product RM-484
    Manufacturer (c) Nokia
    IMEI 354203032926315
    Mastercode 26745760
    Simlock backup OK, saved to RM-484_354203032926315_25052010_075419 ?.SLBackup.PM
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Processing RM-484_20.115_prd.core.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 12A00109D07D0052B664C7DFAD5842A214A19AF5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    RM-484_20.115_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
    RAPIDOv11_XSR17_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.6
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 01C4258BFD64668B6824B7545BE4904AE5C408A4
    Flashbus Write baud set to 5.0Mbits
    Sending Certificates...
    Certificates OK
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x00040000-0x00082FFF, ONENAND
    EraseArea[0,CMT]: 0x00083400-0x003FFFFF, ONENAND
    EraseArea[0,CMT]: 0x00800000-0x00D5FFFF, ONENAND
    EraseArea[0,CMT]: 0x00D60000-0x0A27FFFF, ONENAND
    Erase Partition (CMT)
    Waiting 320s for erasure finish...
    Erase taken 0.984s
    Writing all blocks...
    Writing CMT ADA Certificate...
    Writing CMT KEYS Certificate...
    Writing CMT PRIMAPP Certificate...
    Writing CMT RAP3NAND Certificate...
    Writing CMT PASUBTOC Certificate...
    Writing CMT PAPUBKEYS Certificate...
    Writing CMT SOS*UPDAPP Certificate...
    Writing CMT SOS*DSP0 Certificate...
    Writing CMT SOS*ISASW Certificate...
    Writing CMT SOS+CORE Certificate...
    Writing CMT SOS+ROFS1 Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 125.719s
    Flashing Speed: 7056.41 kBit/S
    Restarting MCU...
    Processing RM-484_20.115_prd.core.fpsx (APE)...
    Processing RM-484_20.115_008_prd.language.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 12A00109D07D0052B664C7DFAD5842A214A19AF5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    RM-484_20.115_008_prd.language.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
    RAPIDOv11_XSR17_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.6
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 01C4258BFD64668B6824B7545BE4904AE5C408A4
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x07A20000-0x0957FFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.187s
    Writing all blocks...
    Writing CMT SOS+ROFS2 Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 15.500s
    Flashing Speed: 6870.15 kBit/S
    Restarting MCU...
    Processing RM-484_20.115_008_prd.language.fpsx (APE)...
    Processing RM-484_20.115_54.1_prd.customer.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 12A00109D07D0052B664C7DFAD5842A214A19AF5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    RM-484_20.115_54.1_prd.customer.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
    RAPIDOv11_XSR17_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.6
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 01C4258BFD64668B6824B7545BE4904AE5C408A4
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x09580000-0x0A27FFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.79s
    Writing all blocks...
    Writing CMT SOS+ROFS3 Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 0.78s
    Flashing Speed: 1261.54 kBit/S
    Restarting MCU...
    Processing RM-484_20.115_54.1_prd.customer.fpsx (APE)...
    Processing RM-484_20.115_003_U001.uda.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 12A00109D07D0052B664C7DFAD5842A214A19AF5
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    RM-484_20.115_003_U001.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
    Searching for BootCode: DualLine 32Bit
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC0040 (Samsung), Size: 256MBytes, VPP: Not Supported
    RAPIDOv11_XSR17_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.6
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 01C4258BFD64668B6824B7545BE4904AE5C408A4
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x0A280000-0x0F47FFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.453s
    Writing all blocks...
    Programming Status OK!
    All blocks written OK! Time taken 24.594s
    Flashing Speed: 6078.74 kBit/S
    Restarting MCU...
    Processing RM-484_20.115_003_U001.uda.fpsx (APE)...
    All images processed OK! Processing post flash tasks...
    Setting Factory Defaults...
    Factory defaults OK
    Reading info...
    MCU Version V ICPR72_09w36.4
    MCU Date 17-09-09
    Product RM-484
    Manufacturer (c) Nokia
    IMEI 354203032926315
    Mastercode 26745760
    IMEI Spare 3A45020323293601
    IMEI SV 3345020323293601F4000000
    PSN COK280270
    Product Code 0580497
    Basic Product Code 0566653
    PSD 0000000000000000
    LPSN 0
    WLAN MAC 002668A094D3
    RETU 16
    TAHVO 22
    AHNE 11
    HW 0900
    RFIC |Vapaus_5.1 | Aura_?.?
    DSP athlon_ICPR72_09w36_p1
    Simlock Server SIMLOCK SERVER
    Simlock Key 2440700000000000
    Simlock Profile 0000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [1,2] State: OPENED Type: GID Data: FFFF
    Simlock [1,3] State: OPENED Type: GID Data: FFFF
    Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [2,2] State: OPENED Type: GID Data: FFFF
    Simlock [2,3] State: OPENED Type: GID Data: FFFF
    Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [3,2] State: OPENED Type: GID Data: FFFF
    Simlock [3,3] State: OPENED Type: GID Data: FFFF
    Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [4,2] State: OPENED Type: GID Data: FFFF
    Simlock [4,3] State: OPENED Type: GID Data: FFFF
    Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [5,2] State: OPENED Type: GID Data: FFFF
    Simlock [5,3] State: OPENED Type: GID Data: FFFF
    Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [6,2] State: OPENED Type: GID Data: FFFF
    Simlock [6,3] State: OPENED Type: GID Data: FFFF
    Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [7,2] State: OPENED Type: GID Data: FFFF
    Simlock [7,3] State: OPENED Type: GID Data: FFFF
    Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Read info thread finished, continuing...
    Post flash tasks finished!
    Flashing successfully finished!




  2. # ADS
    Circuit advertisement
    تاريخ التسجيل
    Always
    المشاركات
    Many
  • # ADS

    تاريخ التسجيل
    Always
    المشاركات
    Many


  • #2
    عضو موقوف

    الحالة
    غير متواجد
    تاريخ التسجيل
    May 2007
    Phone
    nokia n76
    المشاركات
    8,747
    الشكر
    7,728
    شُكر 10,518 فى 4,026 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    0

    افتراضي رد: سحب باكاب كامل مع تفليش N86 بالسيكلون الجبار

    فعلا بوكس يعتمد عليه
    شكر ا ليك أخي

  • #3
    .: جيماوي محترف :.
    الصورة الرمزية saleh84eg

    الحالة
    غير متواجد
    تاريخ التسجيل
    Oct 2007
    الدولة
    مصــ بالكويت ـــــــري
    العمر
    32
    Phone
    Iphone 4
    المشاركات
    2,633
    الشكر
    4,228
    شُكر 5,129 فى 1,845 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    154

    افتراضي رد: سحب باكاب كامل مع تفليش N86 بالسيكلون الجبار

    بصراحه السيلكون بوكس جامد جدا
    وشكرا على المعلومة

  • #4
    .: جيماوي متالق :.
    الصورة الرمزية smsm342

    الحالة
    غير متواجد
    تاريخ التسجيل
    Feb 2008
    الدولة
    السعودية
    Phone
    نوت 5 ايفون 6
    المشاركات
    1,561
    الشكر
    3,319
    شُكر 872 فى 563 مشاركة
    تم تذكيره فى
    0 مشاركة
    تمت الاشارة اليه فى
    0 مواضيع
    معدل تقييم المستوى
    37

    افتراضي رد: سحب باكاب كامل مع تفليش N86 بالسيكلون الجبار

    110011ud3

  • الكلمات الدلالية لهذا الموضوع

    المفضلات

    المفضلات

    ضوابط المشاركة

    • لا تستطيع إضافة مواضيع جديدة
    • لا تستطيع الرد على المواضيع
    • لا تستطيع إرفاق ملفات
    • لا تستطيع تعديل مشاركاتك
    •