السلام عليكم
تلقيت مشكل في تفليش 1208 , المشكل في ppm و هاهو اللوج
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8336(03-05-2010), 1.0.0.12955(03-05-2010)
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00CD5F23:DA3BDA66
ASIC type: 11
UEM Imei: 35486502536892
Flash Imei: 35486502536892
RPL saved to "C:\mobileEx\3.4\data\backup\RPL\35486502536892_BACK.rpl"
Processing file: 1208+1209_RH-105_v5.91_********************_1_ as MCU
[DCT4,DCT4 ALGORITHM] size: 2.28 MB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00CD5F23:2984DA60
Area [01000000-0100FFFF] erased in 0.672 s
Area [01010000-013AFFFF] erased in 33.562 s
Area [013B0000-013EFFFF] erased in 2.797 s
Area [017C0000-017EFFFF] erased in 0.157 s
Area [01FC0000-01FEFFFF] erased in 0.157 s
Flash programming ...
Programming completed in 25.094 s
File Processed in 1 min 11.281 s
Processing file: 1208+1209_RH-105_v5.91_********************_3_ as CNT
[DCT4,DCT4 ALGORITHM] size: 141.12 KB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00CD5F23:2984DA60
Area [01380000-013AFFFF] erased in 1.843 s
Flash programming ...
Programming completed in 1.610 s
Content extract fail, continue anyway ...
File Processed in 1 min 43.625 s
Processing file: 1208+1209_RH-105_v5.91_********************_2_ as PPM
[DCT4,DCT4 ALGORITHM] size: 1.19 MB
Supported Ids: 2292
Boot error: FF FF FF 72
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
flashing terminated !
Flashing terminated with error(s) in 4 min 16.641 s
RX Buffer: 0000000000F172
المفضلات