جميع تحديثات Setool في موضوع واحد ومتجدد: آخر إصدار SETOOL v1.1429

[hadjimi]

-  added altbypass support for xperia arc_s model, in other words, phones with 8255T chipset fully supported.
-  added resurrection support for s1 qualcomm-based phones with totally damaged security zone.
   resurrection procedure will be described in FAQ later, 
   however, in short it is standard "recovery+write gdfs+unlocking" chain.

   7227,8250-based phones require special uart cables ( pinout included in docs ),
   however it is highly recommended to use special GPG cables
   8x55-based phones does not require any special cables.

   as side effect, imei change possible now for s1 qualcomm-based phones.
   for 7227,8250-based phones need select COM as interface, options are:
   ( signed mode, altbypass mode, do full unlock, allow to change imei when unlocking, use testpoint (gnd type) )
   for 8x50-based phones need select USB as interface, options are:
   ( signed mode, altbypass mode, do full unlock, allow to change imei when unlocking )

   cost of imei change 5 credits, please take in mind, that if you change imei, phone need to be unlocked, 
   so add another 5 credits for unlock procedure.
   if you have calculated signature for some imei, then you can save 5 credits for unlocking ;)

-  added few models to model list, so users don't get confused
-  different bugfixes

RapidShare Link

التحميل على أكثر من سيرفر
من هنــــــا

[hadjimi]

-  resurrection procedure will now work for totally erased s1 qualcomm-based phones
   FAQ now have  resurrection procedure example.

-  forgot to post, that starting from v1.12 setool2 will check for faulty cypress-based reader and refuse to run, 
   if setool2 smartcard installed in such reader. 
   There is no any workaround. 
   Use omnikey-based reader or other normal reader.

RapidShare Link

[ضياء الدين]

v1.1202

- no testpoint altbypass unlock procedure will work now for msm7227-based phones,which using MCUs with fixed security bug.
resurrection cables will NOT work for MCUs with fixed security bug. Because of this,
phones, which are already dead should be recovered using jtag box, which can write ORIGINAL semc boot.
big thanks for help and testing to electrolandgsm.
- switch to usb interface was broken for DB200x phones, fixed.
- added few models to list, so users can use profiles for them.

تنويه يرجى تحميل التحديث من الموقع الرسمي للبوكس

[hadjimi]

v1.1203

-  testpoint altbypass method will work now for msm7227-based phones,which using MCUs with fixed security bug.
   that means, resurrection cables will work for MCUs with fixed security bug.  
-  fixed problem with FOTA upgrade for msm8x55-based phones, unlocked by altbypass

RapidShare Link

التحميل على أكثر من سيرفر

[نصير الاسلام]

smartcard update released for v1.1204 software.

after smartcard update, setool2 no more require internet connection or any credits to unlock any qualcomm-based semc phone.
all settings and procedures are same as usual, but internet connection no more required, if card is updated.

update is paid, cost 20 setool2 credits.
it is DOES NOT matter, if card was already activated or updated to work with >1.107 version.

LGTool will be activated and uploaded automatically during process.

for update procedure please read that thread

[نصير الاسلام]

smartcard update released for v1.1204 software.

after smartcard update, setool2 no more require internet connection or any credits to unlock any qualcomm-based semc phone.
all settings and procedures are same as usual, but internet connection no more required, if card is updated.

update is paid, cost 20 setool2 credits.
it is DOES NOT matter, if card was already activated or updated to work with >1.107 version.

LGTool will be activated and uploaded automatically during process.

for update procedure please read that thread

[kader19c]

v1.1280

Code:
- fixed m1_aspen flashing - fixed flashing of ICS firmwares for 8x55 phones - removed java-based altbypass method for all a1 phones,except pnx5230-based phones. - reset-based unlock method is now standard altbypass unlock method for a1 phones. you can not use usb as interface for altbypass unlock on db2000,db2010-based phones anymore. you do not need restoration files,bypass files ( still need them for pnx5230-based phone ). and ... altbypass unlock is much quicker and quite "one-buttoned" now ;) - added x1 unlock via codes, all you need - enter IMEI on locks tab and press "request". Cost is 1 credit.
due to major core rewrite, some bugs can appear in a1 phone service patterns, despite i checked all supported phones in different modes.
if you will find problems, feel free to report them on forum.

RapidShare Link

[حسني الوهراني]

تابع للتحديث 1.1280

db2020 brown phones support was broken by accident.
please use that quickfix.

please note, that there NO NEED to use RESET operation for unlock anymore - use it ONLY when GDFS area totally trashed.
for any A1 unlock cases, just check signed mode +altbypass and press unlock/repair.

http://depositfiles.com/files/6ymwdzk0b

[حسني الوهراني]

v1.1286


added quite complex, but working procedure to unlock last SEMC A2 phone, j108 cedar from network locks. beginners, stay away from this procedure. other users, welcome to faq for details. - STE U8500 sony phones supported ( lt22,mt26,st25 ). Standard operations supported - flash,trim area read/write. Network unlock only supported using s1 signature server, which is offline for us. STE U8500 support was done blindly, should work, but need to be tested
RapidShare Link

[نصير الاسلام]

SETool V1.1287 Released

والجديد في هذا التحديث

fixed unlock problems with some sharp 3g phones. - added secunits backup during j108 bypass procedure - misc cosmetic changes

تم الرفع على الميديافير للجميع دمتم بالف خير من الله