6120c قطع مني

[برشلونة]

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.7687(12-02-2010), 1.0.0.12095(13-02-2010)
Processing file: 6120c_RM-243_v7.10_***************_1_.fpsx as MCU
[BB5,XSR 1.5] size: 43.63 MB
Supported RAP Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101011105, 400C192101011105, 4003192101021105, 400C192101021105, 400C192101031105, 4003192101031105, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103, 4003192101051105, 400C192101051105
Boot error: 02 FF 72 00
UPP not responding !
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
Bootstrap failed!
Flashing terminated with error(s) in 41.641 s

[برشلونة]

ودي رساله لما اعمل فلاش

Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.7687(12-02-2010), 1.0.0.12095(13-02-2010)
Processing file: 6120c_RM-243_v7.10_***************_1_.fpsx as MCU
[BB5,XSR 1.5] size: 43.63 MB
Supported RAP Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101011105, 400C192101011105, 4003192101021105, 400C192101021105, 400C192101031105, 4003192101031105, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103, 4003192101051105, 400C192101051105
RAP Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101021103 [RAPIDO3G ver: 1.11]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 0CC0010AA25C005239987AFA5BD2CABE7C8E0621
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 1.37.1 revision: 0.0 size: 0x3B80
Supported RAP Ids: 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105
loader not responding (0200000000F172)
Flashing terminated with error(s) in 6.875 s
RX Buffer: FFFFF372

[s.a.s.a]

اتاكد من سلامة الكابل

[AhMEd TOhAMY]

ماسبب التفليش من البدايه
قم بتفليش على بوكس التورنادو مباشرتا
واخبرنا بنتيجه

[برشلونة]

الكابل تمام

والسبب كان تعريب

بس انا لما لقيت الجهاز كده فتحته ولقيه البورده متسخن عليها وكده

وانا شغال على التورنيدو دلوقتي

[برشلونة]

وكده بعد الفلاش على الترنيدو

بس شاشة سودا ومش بيفتح

Cannot Detect Mobile Brand
1ST BOOT : C0,07 [Rm-243] [2.0.9.0]
RAPx ID : 000000010000022600010006400C192101021103
EM 1 ID : 00000295
EM 2 ID : 00000B22
RAPx PBID : 0CC0010AA25C005239987AFA5BD2CABE7C8E0621
RAPx MODE : 00
RAPx HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
RAPx ROID : A8C1D6713E691FF8
CMT 1ST Boot OK
CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 1.37.1
CMT FLID0 : 00EC0030-00400121, Sam OneNAND-1G
CMT FLCNT : 00030000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAPIDOv11_algo.fg, Ver: 1.40.0
CMT KSIG0 : 0FE1BA92D924A658E4800780FA6F4868100AC947
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
IMAGE : 6120c_RM-243_v7.10_***************_1_.fpsx
CMT NAND Erase Area: 0x00040000-00082FFF
CMT NAND Erase Area: 0x00083400-0087FFFF
CMT NAND Erase Area: 0x00B80000-04DFFFFF
CMT NAND Partition Format
CMT FLASH ERASE OK, Time: 00:01
Written: 11 Certificate(s)
CMT FLASH WRITE OK, Time: 03:56
IMAGE : 6120c_RM-243_v7.10_***************_3_.fpsx
CMT NAND Erase Area: 0x03300000-04DFFFFF
CNT FLASH ERASE OK, Time: 00:00
Written: 1 Certificate(s)
CNT FLASH WRITE OK, Time: 01:40
IMAGE : 6120c_RM-243_v7.10_***************_5_.fpsx_White= ÃÈíÖ
CMT NAND Erase Area: 0x04E00000-07B3FFFF
PPM FLASH ERASE OK, Time: 00:00
PPM FLASH WRITE OK, Time: 00:01
Flashing Completed, Rebooting Mobile
All Done, Time: 06:04

[أنس حلبي]

فلش الجهاز ب usp daed
MX او JAF او mt

وملف ال pmm v20

وانشاء الله تتم بنجاح

[برشلونة]

مشكور يا استاذ انس على المتابعه والاهتمام

بس الزبون معندوش صبر اخد الجهاز وجري .......

هنحتاجكك تاني