مشكله في تفليش n7100

[mohamaedkaka]

السلام عليكم

انا معايا جهاز n7100 استخدام البينات مش شغاله عليه عملت ريست وكل حاجه مش شغاله بردو بجرب افلشو مبيرداش ولا علي الاودين ولا علي z3x ودي رساله الاودين

[/HTML] Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship. tar.md5 is valid.
CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md 5 is valid.
MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.m d5 is valid.
CSC_XEF_N7100OXADLJ2_422394_REV00_user_low_ship.ta r.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:17)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
Get PIT for mapping..
Firmware update start..
sboot.bin
NAND Write Start!!

Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)

[magdy_saad]

جرب اصدار الاودين ده odin3 v1.87

وارفع انفو ال z3x ومتابع معك

[mohamaedkaka]

ده انفو ال z3x

Selected model: N7100
Selected port: COM4 Z3X BOX Serial Port
Selected port speed: 115200
File analysis... OK
Total file size: 0x5DB565CC
Searching USB Flash Interface... detected COM14
Setup connection... OK
Reading PIT from phone... OK
Saved to C:\Program Files\Z3X\Samsung\SamsungTool\Pit\N7100_19-2-2014_9-37-17.pit
Sending sboot.bin... Error
Done with Samsung Tool v.16.8




Done with Samsung Tool v.16.8