1616 لا يقبل التفليش
اخوان جهاز 1616 لا يعمل تشك وهذا قراءة التشك على الMX KEY MXKEY [MxKey Team HTI PLUS Flasher Interface 3], SN: C08735A6====================================================================================================================================
Using device: HTI, FW ver: 00.50, SN: 01007022
Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20769(01-04-2012), Library ver: 1.0.0.14022(01-04-2012)
Boot error: CC CC CC 00
- Repeat the procedure. Sometimes it is a matter of temporary communication problem or similar.
- Check that all used cable are solid without any visible damage and have good contact. If possible, try with other cables.
- On rare occasions phone might be damaged or dead. So, if possible, try with another phone.
موهذه قراة اللاسكانPhone type: RH-125===============================================================================================================================
SW version: V 06.51 13-05-11 RH-125 (c) Nokia
Imei plain: 35930804765728-7
Product code: 0587412
Cellular system: GSM
ASIC ID: 0x2292, type: 11
Language Pack:
- not available.
Imei net: 35930804765728
Provider: GSM Test Operator
Counter: 0/3, 0/10
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 0000000000030002
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
وعند التفليش يعطى هذه الرساله ? Could save RPL backup from, you want to cotinue
رد مع اقتباس
المفضلات