اخوانى الاعزاء لدى مشكله فى تثبيت البوكس
اولا كان شغال معايه كويس على v9.60 ولكن بعدتنزيل ويندوز xp وتنزيل فيرجن 11.20 لا يريد ان يعمل وهو كالاتى
ATF Box is not in USB 2.0 Mode
==============================================
* Go to "Product Support" tab and click the
* "Restore Box" Button to fix the Box Firmware
** If Problem is Not Solved...
1. Make Sure you are NOT using USB HUBS
2. Make Sure your USB port is USB 2.0
3. Make Sure you are using the latest Drivers
*** If Problem is STILL Not Solved
1. Use a THICKER USB Cable
2. Connect ATF Directly to the Root USB Port
3. Uninstall Drivers, Reboot PC, Reinstall
**** If you are still Stuck...
1. Search your entire PC for "ftdibus.sys
2. Delete all "ftdibus.sys" files you find
3. Reboot PC...
4. Disconnect ATF Box and all Boxes from PC
5. Run C:\AdvanceBox Turbo Flasher\Driver\Remove_ATF_Drivers\Remove_ATF_Drivers.bat
6. ReInstall ATF Software
7. Connect ATF Box Only to your USB Port
8. Install the Correct Drivers
************************************************
INIT : FAILED , CHECK YOUR BOX FIRMWARE
************************************************
box _sn:00000000
ما الحل اخوانى الاغزاء البوكس مش شغال منذ 20يوم ارجو الحل ولكم جزيل الشكر
المفضلات